10 inch Trailer Wheel with 5 on 5-1/2 inch Bolt Pattern that Fits Tire Size 20.5x8-10

Question

Question:

part # am20053 is this a rim for a 20.5x8-10 tire the rim needs to be 5 lug on 5.5

asked by: Steven B

0

Expert Reply:

Yes the Americana trailer wheel part # AM20053 does fit the tire size 20.5x8-10 like the # AM1HP52.

expert reply by: Jameson C

0

Answer 1

We have the part #AM3H454 which matches the criteria you mentioned. It is a 20.5 x 8 - 10 tire Load Range E mounted on a wheel with a 5 on 5 inch bolt pattern.

view full answer...

Answer 2

Hi Tommy; the max speed for the #AM3H453 is 65 mph. If you need a higher speed rating we don't have a wheel/tire combo with the 5 on 5-1/2 bolt pattern so you'll have to purchase them separately. You can use the Steel Solid Center Trailer…

view full answer...

Answer 3

For a 5-lug wheel that fits a 20.5 x 8 x 10 tire, use the Steel Trailer Wheel - 10" x 6" Rim #AM20053 if you have a 5 on 5-1/2" bolt pattern or #AM20046 for a 5 on 4-1/2" bolt pattern. If you aren't sure what your bolt pattern…

view full answer...

Answer 4

Unfortunately, we do not. Are you certain that your wheel doesn't have a 5 on 5-1/2 bolt pattern? Take a center-to-center measurement between 2 adjacent wheel bolt holes. If that distance is 3 inches, you have a 5 on 5. If it's 3-1/4 inches,…

view full answer...

Answer 5

Sometimes the best option is to replace the hub when nothing is available that fits. In your case, we have a wheel and tire combination that will work perfectly so it won't be necessary. The Kenda Loadstar 205/65-10 Bias Trailer Tire #AM3H454 is…

view full answer...

Answer 6

We offer the Steel Solid Center Trailer Wheel part #AM20053. this has the 5 on 5.5" bolt pattern your are looking for. It is a 10" rim that is 6" wide. Check out the linked video on it. This is the only wheel that we have with that…

view full answer...

Answer 7

The Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel #AM3H454 is the updated metric sizing of the 20.5x8.0-10 tire that you currently have. The steel wheel uses the 5 on 5-1/2" bolt pattern that you currently have. So…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

10 inch Trailer Wheel with 5 on 5-1/2 inch Bolt Pattern that Fits Tire Size 20.5x8-10

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching