See what our Experts say about this etrailer Trailer Suspension Parts

• Replacement Top Plate for 26" Leaf Springs
  Thanks for reaching out, David! We do have replacement top plates, like the U-Bolt Plate # TRTP238175 for a 2-3/8" diameter axle, or the U-Bolt Plate # TRU69FR for a 3" diameter axle. We also have a selection of 26" long leaf springs that I'm linking for you to filter through. The most common weight capacities are 2K # e77SR, 4K # e22YR, and 6K # e94SR.
  view full answer...
• Replacement Axle for a 3,500 lbs Dexter 8459488 Axle w/a 86.5" Hub Face and a 68.5" Spring Center
  Hey Larry, thanks for the information! To replace your Dexter axle, I recommend the Lippert Trailer Axle Beam with Super Lube Spindles item # LC63PK. Your Dexter pn 8459488 axle has a 86.5" hub face and 68.5" spring seat measurement so this axle will be a comparable replacement. We do not carry a Dexter axle that matches your pn 8459488 specifications. The Lippert Axle item # LC63PK has spring seats mounted in the underslung position and 4-bolt brake flanges installed. You'll be able...
  view full answer...
• Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
  Yes, we do Steve! For an overslung 3,500 lbs axle, I recommend the Lippert Trailer Axle Beam with Super Lube Spindles item # LC33PK. This axle is sold individually. The Lippert Trailer Axle Beam item # LC33PK has a 86" hub face and a 68-1/2" spring center. The spring seats are welded onto the axle in the overslung position so you won't need to use a flip kit. You will be able to reuse your existing 3,500 lbs hubs as well. When you swap out your old axles you will also want to replace...
  view full answer...
• Determining If Dent In Torsion Axle Is Causing Driving Vibrations
  Thanks for the pictures! That does look like a good size dent but the axle may not be bent. What I recommend is removing the hubs and taking a look at the bearings for any abnormal wear, and go ahead and repack the bearings if they look good still. Likely the spindle nut loosened up giving you the excessive play you mentioned. You will want to place the hub on the spindles while rocking it back and forth to seat the bearings in the races. Next tighten the spindle nut until it stops...
  view full answer...
  
• U-Bolts & U-Bolt Plate For Trailer Axle e72GR
  The correct 5-1/2" U-bolts and U-bolt plates for the Trailer Axle with Idler Hubs # e72GR are the following: - U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter # 176400 - U-Bolt Plate - 2-3/8" Diameter, Round Trailer Axle - 1-3/4" Wide Spring - 1/2" Bolts # TRTP238175 You can get them individually since you mentioned only needing seven, but it does also come in a kit that has four U-bolts and plates, the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long...
  view full answer...
• Are Trailer Leaf Spring Weight Capacities Listed Per Axle or Spring
  The leaf springs we carry like the part # e54SR are rated by the axle capacity they were intended to be used on. So this spring is designed for a 3,500 lb axle. It has an individual spring capacity of 1,750 lbs. To pick out the u-bolts you'd need I'd need to know the diameter of your axles. Most likely it's 2-3/8 inch so you'd need the # SP01-040 for the U-bolts and then for plates # TRTP238175. Then for new shackle bolts you'd just need the # 126B2 and you'd be set.
  view full answer...
• Replacement Overslung 3,500 lbs Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat
  Thanks for all the information Chad and welcome back! It definitely sounds like your axles bent. To replace your Jayco's overslung 3,500 lbs axle, I recommend the Lippert Trailer Axle Beam with Super Lube Spindles item # LC33PK. The Lippert Trailer Axle Beam item # LC33PK has a 86" hub face and a 68-1/2" spring center. The spring seats are welded onto the axle in the overslung position so it's going to show up ready to be installed. You will be able to reuse your existing 3,500 lbs hubs...
  view full answer...
• Recommended Full Suspension Set Up for a 3,500 lbs Tandem Axle Trailer
  Hey Todd. We don't have a complete all in one suspension kit for 3,500 lbs tandem axles but we do have every part you'll need. I have listed them below: 25-1/4" Long Leaf Springs - EMCO Item # EM46RB for 3-Leaf or item # e54SR for 4-Leaf. These are sold individually so you'll need four. Wet Bolts, Shackle Straps, and 9/16" Bronze Bushings - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps item # MR46ZR. This one kit includes all of the suspension bolts,...
  view full answer...
• What Are Dimensions On The Redline U-Bolt Plate, # TRTP238175
  The measurements on the TruRyde U-Bolt Plate, # TRTP238175 are as follows: Looking at the picture on the item page the overall length (left to right) is 5-9/10 inches and the overall width top to bottom) is 3-3/4 inches. The thickness is 3/16 inches. The measurement on the four outer holes, center to center, is 2-1/3 inches (left to right) and 2-16/17 inches (top to bottom). From top or bottom of plate to the center of middle hole is 2.95 inches.
  view full answer...