bing tracking image
Q & A Icon

What is the Tube Diameter of the Lippert Trailer Axle Beam with Super Lube Spindles LC63PK?  

Updated 03/04/2026 | Published 02/11/2026

Question:

I am looking at LC63PK Lippert Trailer Axle Beam with Super Lube Spindles - 86.5" Long - 2,500 lbs to 3,500 lbs Part Number: LC63PK I was wondering what the tube diameter is

0

Expert Reply:

Hey Eric, welcome back! The Lippert Trailer Axle Beam item # LC63PK is 2-3/8" in diameter. This 3,500 lbs axle has an 86.5" hub face and 68.5" spring center measurements.

The Lippert Axle item # LC63PK has spring seats mounted in the underslung position and 4-bolt brake flanges installed. You'll be able to reuse your existing hubs and brake assemblies with the new axle. If your axle is mounted below your leaf springs, you'll also need the Dexter Trailer Springs Over-Under Conversion Kit item # K71-384-00.

If your axle is currently mounted above your leaf springs, I also recommend picking up two of the Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles item # LC27RP and two of the U-Bolt Plate item # TRTP238175. The U-Bolts on your axle will need to be replaced when you install the Lippert Trailer Axle Beam item # LC63PK. The bolts and nuts are only meant to be torqued down upon the initial installation. The hardware likes to fatigue and bend so you won't be able to torque the old ones to the right specs.

What kind of trailer do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
Axle Diagram
Axle Diagram
(click to enlarge)
Jerred H. profile picture
Etrailer Expert

Jerred H.

3/4/2026

Hey Eric, how did the 3,500-lb trailer axle work out for your setup? Did the pregreased hubs make things easier when you got it mounted? Your update could make it easier for the next person with the same question.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>