Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?

Updated 08/23/2026 | Published 07/27/2026

Products Featured in This Question

Lippert Trailer Axle Beam with Super Lube Spindles - 86" Long - 2.5K to 3.5K - Overslung

(4)

$242.18

Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles - 2-3/8" Wide

(2)

$14.27

U-Bolt Plate - 2-3/8" Diameter, Round Trailer Axle - 1-3/4" Wide Spring - 1/2" Bolts

(34)

$5.01

Question:

Do you have an overslung 3,500 lbs axle with a hf= 86 sc=68.5? I need to replace two axles that mount below the leaf springs and would prefer not to have to use a flip kit. Thank you

asked by: Steve

Expert Reply:

Yes, we do Steve! For an overslung 3,500 lbs axle, I recommend the Lippert Trailer Axle Beam with Super Lube Spindles item # LC33PK. This axle is sold individually.

The Lippert Trailer Axle Beam item # LC33PK has a 86" hub face and a 68-1/2" spring center. The spring seats are welded onto the axle in the overslung position so you won't need to use a flip kit. You will be able to reuse your existing 3,500 lbs hubs as well.

When you swap out your old axles you will also want to replace your U-Bolts, I recommend two of the Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles item # LC27RP and two of the U-Bolt Plate item # TRTP238175 for each axle. The Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles item # LC27RP should be torqued between 45 ft/lbs and 70 ft/lbs.

What kind of trailer are you replacing the axles on and what kind of roads do you typically travel? Feel free to answer this and throw in any other questions you have, where it says Add Comment.