Video Transcript for Breaking Down the U-Bolt Plate

Hi everybody, Andy here with etrailer.com. Let's take a brief look at these U-bolt plates. Now these U-bolt plates are going to use two 9/16 of an inch diameter U-bolts, which are sold separately, to attach your 2 3/8 inch in diameter trailer axle to your 1 3/4 inch wide leaf springs. These plates are made here in the U.S.A. and let me come over to the other side of my table here to the front and give you some overall measurements. So I wanna first measure the overall length, so lining that up, as you can see, we are sitting right at 5 7/8 inches long.

And then measuring the holes here I'm gonna be measuring inside of hole to inside of hole, or another way to put that is in between the holes. And as you can see hopefully, we are sitting right at 2 3/8 inches. And then the overall width, we're sitting right at 3 3/4 inches wide. And then in regards to those holes, again measuring in between the holes inside to inside, we're sitting at that 1 3/4 inch measurement. And again, as I mentioned at the beginning of our time together, the bolt hole diameter is 9/16 of an inch.

And that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.