Recommended Hanger Kit for Single Axle Double Eye Leaf Spring Trailer Suspension

Published 12/01/2017

Question:

Do you offer a single axle leaf spring hanger kit for 1-3/4” wide springs? Everything I find is for the 2” springs? Also they are double eye springs. Thanks

asked by: Chad

Helpful Expert Reply:

The Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2 will work well for your 1-3/4 inch wide leaf springs. Double eye springs are the style have both the bolt in the front and rear and are more common than slipper style springs that only have a bolt on the front end.

Without knowing your axle capacity, I have linked the page to all your double eye spring options. All our systems are rated based on axle weight, so for a 2,000 lb axle you'd look at 2,000 lb springs and in the description you will see each spring has a load capacity of 1,000 lbs, so one on each side will give you your 2,000 lb capacity. I've also attached an article to assist with your single axle suspension.

expert reply by: Jason S