See what our Experts say about this Lippert Accessories and Parts

• Replacement Parts for 1970s Camper Frame with Dayton Fayette Axles
  The Lippert Components Heavy-Duty Replacement Shock - Yellow # LC283280 is 8.625 inches compressed and 13.5 inches fully extended. Your current suspension may extend and retract slightly further but the shocks will be a good replacement based on the actual shock absorbing as long as they will fit your brackets. Unfortunately we don't have any info on your axle or hubs, so to help, I will need to get the bearing numbers printed on the face of your inner and outer bearing of one hub. If...
  view full answer...
  
• Length of Shocks on Lippert Bolt-On Shock Mount Kit
  I'm not exactly sure what you are asking; if it is about how to mount the Lippert shocks, the figure you referenced is simply a part of those directions. If you would like to clarify please let me know so I can get a better idea of what you are trying to accomplish.
  view full answer...
  
• Which Shocks Fit Dexter Axle on Trailer
  Hi Ronald; a search points to that being a 7k axle but I don't have a way to be sure without the serial number off of the axle tag. You can also measure your axle diameter which is enough to find the right kit. If you have a 3" diameter overslung axle (leaf springs on top of the axle) the # LC281281 is the correct kit. If it is a 2-3/8" overslung axle you need # LC281255 instead. If your leaf springs run under the axle the only option is the Roadmaster Comfort Ride Shock Absorbers. These...
  view full answer...
• Replacement Shocks for 2007 Triple E Topaz 5th Wheel
  Hello Dave; we don't have a good way to identify the shocks on your 2007 Triple E Topaz. What I would do is reach out to Triple E RV to see if they have any information on what shocks were originally installed. If I had to guess, I would say it is the Lippert # LC283280 which is designed for 3,500 - 7,000 lb axles with a compressed length of 8-5/8" and extended length of 13-1/2". These are used for trailers with the factory shock prep and likely the same as the factory shocks you have now.
  view full answer...
• Measuring to Determine the Right Size Shock to Use on a Trailer
  If you are looking to add shocks then measure using the following procedure: Compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then measure the half way point of the stroke (C). Then you measure the shock length with it compressed to the half way point (Fig. 4A). The measurement cannot exceed the fully extended or compressed lengths. Add 2 inches to that last measurement....
  view full answer...
  
• Shock Kit for Travel Trailer
  We do carry shocks for trailers that could work for your 2003 Kit Road Ranger. I was unable to locate a reference to the product number you mentioned but I recommend taking a look at the Lippert Components Bolt-On Shock Kits, and the right one for you will depend on your axle. Shock Kit # LC281255 is for leaf spring suspension systems with 3,500-lb (2-3/8") axles and Shock Kit LC281281 is for leaf spring suspension systems with 5,200-lb to 7,000-lb (3") axles. The shocks on these kits...
  view full answer...
• Shock Kit that Fits 2023 Jayco Eagle 317RLOK with Shock Mounts
  Hey Todd, so our understanding is that from previous customers who have had your same RV the # LC283280 was the correct fit...but since these seem too long and RV components unfortunately aren't as consistent as they should be what you'd want instead is the part # K71-697-00 which is a little shorter by about an inch. Also keep in mind the studs on the shocks could be grinded shorter to allow for easier fitting into the mounts.
  view full answer...
• Replacement Trailer Shock Absorber for 2004 Jayco Designer 31RLS
  Lippert Components Heavy-Duty Replacement Shock - Yellow # LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch measurement. If you need replacement brackets, you can use the kit # LC281281.
  view full answer...
  
• Lippert Shock Kit for 2021 Keystone Passport 219BH
  Hi Joe; the correct kit depends on your axle diameter and leaf spring configuration. I don't have a way of knowing which axles are on your 2021 Keystone Passport 219BH so you will have to identify them first. For both kits the leaf springs must be on top of the axle (overslung). If you have a 2-3/8" diameter axle (typically 3,500-lb capacity) you need the # LC281255 and for a 3" diameter axle (5,200-lb to 7,000-lb) # LC281281. If you have the shock prep then all you need is the Lippert...
  view full answer...
• Compressed Length of Lippert Shock and Where it is Measured
  We have shock # LC283280 but its compressed length is 8-5/8 inches. We are measuring that from inside washer to inside washer though so if you are measuring differently it is possible that this shock will work. I have linked a video of this shock for you.
  view full answer...
• Shocks for 2021 Jayco Eagle HT With Factory Shock Prep
  You are correct, your 2021 Jayco Eagle HT does not need the full kit # LC281281. All you need to add shocks to your trailer is the Lippert Heavy-Duty Replacement Shock # LC283280. This is a single shock so you will need to order a quantity of 4. They come with everything you need to install the shocks on your factory brackets.
  view full answer...
• Replacement Shocks for 1973 Airstream Argosy
  Hey Tim! We do have some replacement shocks available. However, I do not know what is on your 1973 Airstream Argosy. Check out the following: -Lippert Heavy-Duty Replacement Shock # LC283280 -Lippert Standard Replacement Shock # LC283271 -Replacement Dexter Bolt-On Shock Kit # K71-697-00 I would measure your existing shocks and see if these look like they will fit. You probably have Dexter axles on there so the if one of these is going to fit it is likely the Dexter shocks. It might...
  view full answer...
• What Shocks Do I Need For A 2022 Jayco Eagle With OEM Shock Prep Kit
  Hey Adam, it looks like you are on the right track here, because the Lippert Shock # LC283280 is in fact the correct shock for your 2022 Jayco Eagle 29.5 BHOK with the Jayco shock prep kit. Basically, it has the mounts that come with the # LC281281 shock kit so you will need four of the # LC283280 shocks for your tandem axle fifth wheel.
  view full answer...
• Replacement Shocks for 2019 Northwood Nash 29S
  Hey Doug! Doing some research on the Monroe 555001 shocks, I'm pretty confident that the Lippert Heavy-Duty Shock # LC283280 will work well as a replacement for your Northwood Nash, and likely even an upgrade. It's designed for 3,500 to 7,000 pound axles so it has plenty of range, and has a compressed length of 8-5/8" and an extended length of 13-1/2". If you're able to take a couple quick measurements of the existing Monroe shock, that will tell you for sure if this will fit in its...
  view full answer...
• Replacement Shock for Forest River Cardina
  Hey Dennis, sounds like you are in need of the Lippert shock part # LC283280 which has dimensions that are very close to what you mentioned. When compressed this is 8-5/8 inches and when extended it is 13-1/2 inches so it would work well for you. Is your shock blown? If so could you feel it back there when towing after it stopped functioning?
  view full answer...
• Recommended Shock Kit for a Tandem Axle Trailer w/ 5,200 lbs Capacity Axles
  The Lippert Heavy-Duty Replacement Shock item # LC283280 is just a replacement shock. In order for it to fit you would already need to have a shock kit installed and the shock you are replacing measure 8-5/8" compressed and 13-1/2" extended. If you're wanting to add a set of shocks to your toy hauler's 5,200 lbs axles you can use the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks item # LC281281 but only if your axles are mounted below your leaf springs and they are 3" in diameter....
  view full answer...
• Recommended Replacement For A Dexter Axle 052-003-00 Trailer Shock Kit
  Hey Leonard, We don't currently offer the Dexter 052-003-00 but you could use the Lippert Standard Replacement Shock # LC283271 if you have a 3,500lb axle or the Lippert Heavy-Duty Replacement Shock # LC283280 if you have a 3,500 - 7,000lb axle.
  view full answer...
• Recommended Shocks For 2020 Jayco Eagle 321RSTS With Factory Shock Prep
  For your 2020 Jayco Eagle 321RSTS with the factory shock prep I recommend the Lippert Heavy-Duty Replacement Shock - Yellow # LC283280 as they will do a great job at absorbing road shock and offering a smooth ride for a more enjoyable towing experience. I included a video of the # LC283280 for you to take a look at.
  view full answer...
• Which Replacement Shocks For 2018 Heartland RV Bighorn 3270RS 5th Wheel Trailer
  The Lippert Standard Replacement Shock - Black # LC283271 is only rated for 3500lb axles with 2-3/8" diameter axles so I am a little surprised that they were used on your 2018 Heartland RV Bighorn 3270RS 5th wheel as it has a GVWR of 15500lbs. The Lippert Heavy-Duty Replacement Shock - Yellow # LC283280 will be just over an inch longer when compressed, and 1-1/2" longer extended but is rated for 3500-7000lbs which would be much better suited for your trailer. I included a video of the...
  view full answer...
• Shock for Jayco Eagle 317RLOK with Shock Prep Kit
  The correct shock that fits your Jayco Eagle 317RLOK that has a the shock prep kit is the part # LC283280.
  view full answer...
• How to Measure Shock Length to Install Lippert Bolt-On Shock Mount Kit
  I will be happy to help explain how you would measure a shock such as # LC283280. Basically, you will compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then measure the half way point of the stroke (C). Then you measure the shock length with it compressed to the half way point (Fig. 4A). The measurement cannot exceed the fully extended or compressed lengths. Add 2 inches to...
  view full answer...
  
• Correct Shocks for Jayco Eagle Fifth Wheel 321RSTS with Factory Mounts
  The Lippert Heavy-Duty Replacement Shock part # LC283280 is what I recommend for a Jayco Eagle Fifth Wheel 321RSTS with factory shock mounts. These will work great for this trailer and they are a bolt-on fit. The provided part number appears to be one of Jayco's which we cannot reference.
  view full answer...
• Recommended Shocks for a 2020 Jayco Eagle HT 28.5 RSTS 5th Wheel
  The best shocks for your 2020 Jayco Eagle HT 28.5 RSTS 5th Wheel are going to be the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item # RM-2460. This system has nitrogen-charged shock absorbers that help to eliminate trailer bouncing, chucking, and proposing. This system fits 3" diameter 5,200 lbs to 7,000 lbs axles. You should verify your axle diameter before purchasing. The Lippert Heavy-Duty Replacement Shock item # LC283280 you were looking at will only fit your...
  view full answer...
• Best Shocks for Tandem Axle 5th Wheel Trailer
  I am not sure what you mean by double pin shock but we do have shock kits for 5th wheel trailers that are shown on the page I linked for you. A tandem axle 5th wheel trailer with a GVW of only 5000-lbs is pretty rare but trailers are getting lighter these says thanks to the availability of composite materials. Even so, a lightweight tandem axle 5th wheel such as a Jayco Eagle HT still has a GVW rating of almost 10K. You'll want to confirm the weight rating of the trailer's axles themselves...
  view full answer...
  

Do you have a question about this Accessories and Part?