bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 7000 lbs
  4. 94 Inch Long
  5. 79 Inch Long
  6. Spindles Only
Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs

Item # 8327864
Our Price: $422.15
Trailer Axles
Shipping Weight: 58 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs part number 8327864 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (611)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - 8327864

  • 7000 lbs
  • 94 Inch Long
  • 79 Inch Long
  • Spindles Only
  • No Drop or Lift
  • Leaf Spring Suspension
  • No Hubs
  • Dexter
  • Easy Lube Spindles

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 7,000 lbs
  • Hub-face-to-hub-face length: 94"
  • Spring-center-to-spring-center length: 79"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: 14125A
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



8327864 Dexter Replacement Axle Beam - Easy Lube - 94" Hub Face - 79" Spring Center - 7,000 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs - 8327864

Average Customer Rating:  4.8 out of 5 stars   (611 Customer Reviews)

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

by:

Dexter axles fit perfectly, packaged nicely take care not to cut the pre wired axle, came with the spindle nuts and washer overall I got more than I bargained for, good value



by:

I've ordered similar items earlier this year that did not come on the delivery date but were a couple days late. The most recent item I ordered arrived lightning fast and on the day is that it was supposed to! Every time I contacted the trailers they have been very helpful taking care of me. Paula s the most recent was the most helpful and I appreciate her for that! I will continue to do business with details!



by:

Your website told me to only verify the length after I put in specifics of my trailer. It arrived and my mechanic Saud it was the wrong one because I needed a drop style. Even though your website was wrong your customer service still made me pay for the return shipping. So I'll take my business somewhere else from now on and my reviews will not be flattering fir your company etrailer.com

Etrailer Expert

Brooke M.

10/21/2022

Normally, when replacing an axle with a new one you will want to the same style. You will see in the description that this one doesnt provide any or lift. Looking at the old axles you have you will note the difference in the spindles. You will be able to tell whether you want one with rise or as opposed to just straight like this one.



by:

Easy ordering, Fast Delivery



by:

Great price for quality product awesome service and free delivery



by:

Boat trailer axel worked out great. Just follow directions when ordering and installing.



by:

Perfect replacement fit right on to trailer like original



by:

Easy installation with 2 people & a little mechanical ability. Working fine & carries a 61" zero turn mower & all of my lawn equipment barely noticing the load. I highly recommend this axle.



by:

Cheapest oem replacement I could find. Super fast shipping.



by:

Perfect replacement. I would recommend this axle and components to others. Great customer support and service.



by:

Sarah was very helpful when I called because I was unable to locate the correct parts on the website. The order shipped in a timely manor.



by:



by:



by:

Products and service was hreat



by:



by:



by:



by:



by:



by:



by:



by:

Worked as planned = a good fit. My application required me to weld new mounts to the opposite side of the axle - my application was over sprung and had a 68.5" mounting measurement.



by:

I was pressed for time to deliver a car and this axle was advertised to be delivered on Tuesday. Then, tracking changed delivery to Wednesday. Still, it was timely enough, barely. The axle looked perfect except, there weren’t any spring perches! The axle was ordered with perches. I spoke with a delightful young lady, if that is not woke I don’t care. She remedied the situation, HOPEFULLY.



by:

The axles were missing studs that fell out during shipping. Also, no nuts were included for mounting the brakes.



by:

It has been a year. The axle has preformed flawlessly. 5-star because it exactly matched the existing axle for bearing seal part and brake assembly which were moved from the existing lippert 5200# axle to this one. This 6000# axle provides a bit of margin for weight over the existing.


25
611
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Replacement Axle Solution for 2006 Carry On Dual Axle Trailer
    The closest option we have that would work well is the Dexter axle part # 8327864-EB which has the same spring center dimension you have of 74 inches but is 1 inch longer overall at 94 inches from hub face to hub face. This is a 7,000 lb capacity axle with a 3 inch outer diameter and comes with hub drums and brake assemblies that have a wheel bolt pattern of 8 on 6-1/2 inch. You didn't mention what specific hardware you'll need but the part # APUBR-8 is the correct size u-bolt kit you'd need.
    view full answer...
  • Replacement 7000-lb Trailer Axle with 3" Diameter
    I have a solution for you, but there is not an available axle with exactly 92.5" hub face to hub face or 78.5" spring center to center measurements that could be used as a replacement. For this reason, I would recommend re-measuring to make sure that your measurements are correct (since they're extremely close to available stock axles, the measurement could be off if it was taken from the damaged axle). If you're able to re-measure your existing, non-damaged axle, and you have 94" hub...
    view full answer...
  • How To Find The Correct Replacement Axles For A Sure-Trac Trailer
    According to my research, your Sure-Trac ST8216TAT-B-070 trailer has 7,000-lbs axles like the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327864. However to pick the correct axle for your trailer, you are going to need to measure from spring center to spring center, and hub center to hub center. For example, # 8327864 mentioned earlier has a spring center measurement of 79", and a hub face measurement of 94". With this measurement I will be able to find you an adequate replacement...
    view full answer...
  • How to Determine Replacement Axle for 2006 Weekend Warrior 2300 FS Toy Hauler
    We don't have a way to determine what axle is on a specific trailer, but I can tell you how to measure to determine whether or not the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB will work for you; you'll need to take two measurements. You'll want to measure from the face of one hub to the face of the other and then you'll also need to measure from the center of one spring seat to the center of the other. The # 8327864-EB measures...
    view full answer...
  • 94 inch 7k Dexter Axle that Has Brake Assemblies and Hub/Drums
    The axle part # 8327864 does not come with hubs and brake assemblies but we have the part # 8327864-EB is the same axle that does include the brake assemblies and hub/drums like you are wanting.
    view full answer...
  • Recommended 5,200 lbs Dexter Axle w/ a Bend
    The Dexter 5,200 lbs axle we have item # 6340624 is 95" long so I recommend checking your measurements again. If it is in fact 94" you will need the Dexter Trailer Axle Beam item # 8327864. This is a 7,000 lbs axle but is 94" long. Both of these axles have the bend in the middle.
    view full answer...
  • Available 94-Inch Long Axles and Matching 3-Inch Diameter Spring Seats
    We do offer 7K-rated beam axles in the 94-inch hub-face-to-hub-face length you mention, shown on the linked page, and these have their spring seats spaced apart on center at either a 78-1/4-inch or 79-inch dimension. Since we do not produce these axles ourselves we cannot make one for you with different spacing but you can have a local trailer/welding shop install new spring seats at the specific 70-inch spacing you need. Our spring seat to fit this 3-inch axle diameter, part # TRSS300,...
    view full answer...
  • How to Determine Where to Position Third Axle When Adding It
    When adding a third axle like the Dexter Trailer Axle # 8327864 to your set up, you are going to need to re-position all of your suspension components. I have added a photo of a cut out from the linked help article which shows you exactly how to determine where to position your axle. So it isn't quite as simple as using your previous hanger measurements to set up your third axle, you are going to need to have them all at certain positions in order to get the correct tongue weight (between...
    view full answer...
    Image 1 for
  • Replacement Dexter 7K Trailer Axle Options
    I do have an option for you but you'd need to do some measuring to confirm compatibility. The two options we offer are the Dexter 7K Trailer Axle part # 8327864 which measures 94" long (hub face to hub face) and the Dexter 7K Trailer Axle part # 8327834 which measures 95" long.
    view full answer...
  • Replacement 94 Inch Axle for 2006 Weekend Warrior Toy Hauler
    That's a good question, but the measurement from hub face to hub face is taking into account the slight bend that is on all trailer axles (the axles straighten out when a load is placed on them). The axles we carry with a 94 inch measurement from one hub face to the other are the Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs # 8327864 and the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs # 8327864-EB. Keep in mind...
    view full answer...
  • Replacement Axle Recommendation For An Older 12"x2" Braking Assembly
    The reason you're having some trouble finding what you need is because you have a pretty old setup on your trailer and it is no longer used. With that being said, your best and easiest solution is going to be a full axle replacement. Since you have a 12"x2" braking assembly, you'll likely need an axle with a weight capacity of 5,200-7,000-lbs, however I recommend finding that out to be sure. Additionally, you're going to need to measure the hub-face-to-hub-face distance (A), as well...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • How to Pick Out Trailer Axle with 8 Lug Bolt Pattern
    To pick out a replacement axle you need to first know the weight capacity you need, the distance between spring seats, and the distance from hub face to hub face and you'll be set. We don't have every length possible but we do have the 7k trailer axle part # 8327864-EB which uses 8 lug hubs and has a distance of 79 inches between spring seats and 94 inches from hub face to hub face. If you need something different I attached a link to a page that has all of the axles we carry. If you can't...
    view full answer...
    Image 1 for
  • Does the Dexter 7K Trailer Axle with Electric Brakes Come Assemblied
    The Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB does come with the hubs and backing plates already installed so you would be ready to go once it arrives. It however does not come with u-bolts so if you need those as well you can obtain the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles part # APUBR-8.
    view full answer...
  • Should 7,000 Pound Axles be Upgraded to 8,000 Pound Axles on 2018 Grand Design Momentum 351
    If you need an axle replacement because one is damaged, you will be fine sticking with the 7,000 lb axles you currently have. All you would need to do is get the hub face to hub face measurement to choose the right axle length. We have 94" # 8327864 and 95" # 8327834 7k Dexter axle replacements. Unfortunately, we do not have any 8,000 lb axles available. I suspect the reason you want to add 8k axles is based on the GVWR of your 2018 Grand Design Momentum 351. The one thing you need to...
    view full answer...
  • Replacement Recommendation for 7K Axle From Dexter Axle
    To replace your 7K axle from Dexter Axle you need part # 8327834 for a simple axle with just the spindles or part # 8327834-EB which is the exact same thing but with an electric brake setup and an 8 on 6-1/2" bolt pattern. I confirmed this with my contact at Dexter Axle. The spring center and hub face dimensions match what you have to this will be a pretty simple swap for the installation. Attached are installation videos of both axle systems for you to check out.
    view full answer...
  • Upgrading to Larger Tires on a 5th Wheel Trailer that Keeps Having Blowouts
    There are 16 inch wheels with the 6 on 5-1/2 bolt pattern that can be used with your 5,200 pound axles. Hubs for 15 inch wheels are also compatible with 16 inch wheels. You just have to make sure that you have enough clearance all around the existing tires to go to the larger size. Tire and wheel combo # TA39VR is a 235/80-16 that is 9.25 inches wide and 30.79 inches tall. This combo is rated for 3,520 pounds at 80 psi so 2 of them on an axle will provide 7,540 pounds capacity. Assuming...
    view full answer...
  • Bolt Pattern For Hubs on 7,000 lb, 94 Inch Long Axle
    I believe you are asking for a trailer axle that is 94 inches long from hub-face to hub-face, and 79 inches long from spring-center to spring-center, and a compatible hub with a 5 on 5" bolt pattern. While there are axles that size, there are no hubs with that bolt pattern; the only bolt pattern available for the spindle on a 7,000 lb axle (which is the weight rating of that axle length) is 8 on 6-1/2". A 5 on 5" hub is only a fit for certain 3,000 lb axles, so what you will need for a...
    view full answer...
  • Recommended Dexter Axle and Hubs with Self-Adjusting Brake Assemblies
    The brake assemblies on the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern # 8327864-EB are not the automatic self-adjusting assemblies. You can instead use the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA to swap them out. Another option is to use the following parts to give you the self-adjusting brake assemblies and save you some money: Dexter Trailer Axle Beam with E-Z Lube Spindles -...
    view full answer...
  • Trailer Axle with 92 Inch Hub Face and 80 Inch Spring Center
    I do have an option for you but we do not offer custom made trailer axles which it sounds like you are looking for because what you have is not common. The best fit option we have if the measurements that you provide are correct is the Dexter Trailer Axle Beam part # 8327864 which is 94" between the hub faces, 79" long between the spring centers, and has a 7,000 lb weight capacity. Please note the hub face measurement does not include the lug studs. If this is slightly longer than what...
    view full answer...
  • How to Make 7,000 lb Underslung Axle Into Overslung Axle
    We do have a way to very easily convert an underslung axle into an overslung axle, but do not offer any overslung. Instead, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles - 7,000 lbs # 8327864 (which measures 94" hub face to hub face and 79" spring center to spring center) or # 8327834 (which measures 95" hub face to hub face and 80" spring center to spring center) and add the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 which moves your trailer's leaf...
    view full answer...
  • 7,000 Lb Trailer Axle with 86 Inch Long Hub Faces
    I do have options for you but none of or trailer axles are 86" long hub face to hub face, 62" long spring center to spring center, and have a 7,000 lb capacity. Instead, we have the Dexter Trailer Axle Beam part # 8327826 which is 86-1/2" long hub face to hub face, 71-1/2" long spring center to spring center, and has a 6,000 lb capacity or the Timbren Axle-Less Trailer Suspension System part # TASR7KS01 which has a 7,000 lb capacity. Please note that if you wanted to use the 6,000 lb...
    view full answer...
  • How to Determine Correct Replacement For 7,000 lb Axles
    I recommend replacing your 7,000 lb axles with the same 7,000 lbs axles you had on your trailer, and to do this all you need to know is a couple of measurements. To determine the correct replacement, you simply need to measure from hub face to hub face and spring center to spring center on your current axles to get the right fit. There are two different lengths for Dexter 7k axles: - 95" Hub Face to Hub Face/80" Spring Center to Spring Center: Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...
  • Determining Which 7000lb Trailer Axles Will Fit A 2005 Keystone Everest 364Q
    I would be happy to recommend two 7000lb axles with electric brakes for you, but unfortunately we do not have a break down of the length of axle your 2005 Keystone Everest 364Q uses. You will need to either measure your current axles hub face to hub face and spring center to spring center as shown in the included diagram, or if you can send me a picture of the axle tag I would be happy to get the information for you. The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wheels and Tires For a Dexter 7,000LB Trailer Axle With 8 on 6-1/2" Bolt Pattern
    While we do have several options that will fit your Dexter 7,000LB Axle # 8327864-EB with the 8 on 6-1/2" bolt pattern the most commonly used is the Karrier ST235/80R16 Radial Trailer Tire with 16" White Wheel # AM34903. Another popular option is the Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel # KE39JR. This gives a better appearance and much lighter weight at only 40lbs with the aluminum wheel versus 67lbs on the steel wheel and tire above. If you have a particular...
    view full answer...


< Previous
12



Do you have a question about this Trailer Axle?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924