Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This red GloLight LED trailer light stands out with its signature halo design. The outer band acts as a bright tail light, while the center lights up for turn signals and brakes. You get strong visibility day or night without the glare or fade that comes with old-style bulbs. With 22 diodes pulling only 0.295 amps for the tail light and 0.59 amps for brake and turn signals at 12.8 volts, it’s powerful but efficient—bright enough to be seen clearly, yet easy on your battery.
If you’re around water, this light is ready for it. The housing and acrylic lens are sealed tight, so moisture can’t sneak in and short things out. That makes it a solid option for wet conditions or boat trailers that get dunked often. You won’t need to worry about corrosion or fogging; it just keeps working even when fully submerged.
No need to mess with separate brackets or grommets here. This light mounts directly to flat surfaces using its built-in polycarbonate flange for a solid, no-wobble fit. The install is straightforward thanks to the 3-wire pigtail: black for the tail light, red for brake and turn, white for ground. It’s an easy wiring setup that keeps things clean and simple.
The LED design means you won’t be replacing bulbs anytime soon. It’s more efficient and more durable than incandescent lights, built to last with consistent brightness over time. Backed by a lifetime warranty on the LEDs, this light meets DOT compliance along with FMVSS 108 and CMVSS standards—so it’s ready for the road and built to stay that way.
Measuring 7-1/2" wide x 3-5/16" tall x 1-1/8" thick, this oval light gives full-size output in a low-profile design. The face itself is 6-7/16" x 2-5/16", extending just 3/4" from the surface—keeping your trailer looking sharp while staying out of harm’s way.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
I ordered new lighting and a spare tire wheel assembly which all came quick and affordable. Thanks etrailer!
The product is excellent, I was amazed how much better than my old lights these units were. The way the break light shows from the running light is very clear and would make breaking and turn signals a lot clearer to other drivers.
Have not installed this light yet, but the low profile and compact design will work well with my new flatbed trailer.
Quick shipping, worked as advertised, easy installation...what else could you want?
It’s just a little smaller in length but it will work. I needed that kind with the hard one piece. That way I can just screw it in. I had to find a picture of it on line, etrailer did not show that type. They only showed the one with the rubber seal with a template. Thanks Dan
Great look
Easy to connect. Fits perfectly.
These lights were quick and easy to install thanks to surface mount. Wiring was simple, took extra time to solder connections. These look great and are bright. Replaced old incandescent fixtures on a 20 year old pop up trailer.
I ordered new taillights for a trailer I purchased they arrived in a timely manner and in good condition, I have not had a chance to install them yet,were less expensive than I could get locally
Light installation was very easy, provides a good " BRIGHT LIGHT " over the stock light that came with the trailer.
Happy with the purchase etrailer got my parts in quickly. Wasn't really sure if these were the lights I wanted but thanks to the videos etrailer provides makes it easier to choose the right lights.
I had to replace the tail lights on my 2009 Skeeter trailer. The trailer is an EZLoader trailer and these lights attached exactly as the original ones did. And actually look better than original ones.
Excellent lights, unique look with the running light ring. Plenty bright on our RV, very easy to install. Shipping was quick, we will definitely order from etrailer again.
GloLight is great quality. We're using these to replace the tail lights on our ambulance RV conversion. Our first set were flush mount and we're very pleased with them, so we ordered this set which are not flush mount so we can mount them as needed. We've also ordered GloSteps from etrailer and are extremely pleased with those as well. Shipping is always so fast! We will remain a returning customer.
Used the lights on my Harley servi-car, they look pretty good for trailer lights. The LEDs draw a lot less wattage than the lights that were on there. My charging system thanks you.
The Glolight LED trailer set is the perfect replacement for my tow dolly. It is light weight and much more visible than the standard bulb lamp set the trailer was equipped with. Installation was quick and very easy, I will recommend this to all needing to change theirs out...
Quite frankly, these are one of the nicest LED taillights I've seen. The glow of the tail-lamp is very modern and it's very bright. These replaced old halogen square tail-lights on a 2005 toyhauler, and it helped freshen up the look of the rear.
I had to drill a few holes in the metal plate these attached to, as the three wires must have a direct exit so that they don't get pinched. Initially, these flashed an error code on my 2018 Superduty when I tested the turn-signals, but when I tested them again, the error code went away. Be aware that swapping out halogens for LED's on a trailer may make your tow vehicle throw a turn-signal error.
Installed on the rear of my tow vehicle for a permanent fix to the magnetic mounted lights I was using. These lights are amazing. The running light element is very noticeable and the turn signals can be seen from a great distance. Easy to install, easy to wire and look great!
Replaced the cracked and foggy 30 year old lights on my popup trailer with a pair of these. They were exactly as advertised and look really great compared to the old original lights. Plus they are much brighter/easier to see... and the blinking action is much sharper... these are definitely much safer the the original lights.
The glo light effect is pretty cool and breathes new life into my old popup camper!
The lights are still working fine after a year.
After a year the lights still look great! Easy, straightforward install. Looks great and a definite upgrade to LED.
I installed them on the upper rear of my Casita trailer for better visibility as the OEM lights were to low.
Lights are bright and extremely visible to following vehicles - they made my friend with a similar trailer with old style incandescent lights jealous. Etrailer was completely supportive solving a minor technical installation issue.
John F.
11/4/2017
A year along and they work great. Never concerned about my visibility to those following.
I installed these on my overland trailer project and they work perfectly
Roy
2/14/2020
Still completely satisfied highly recommend this product
All went very well. thank You
My scamp camper has tail lights mounted really low on the camper. After many close call rear ends I decided to put these GoLight led tail lights higher on the camper. They are really bright and easy to install. Darn good product.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Julien
1/30/2022
Great! now people can see what Im going to do, turn or stop