Replacement LED Light Recommendations For Trailer

Updated 03/31/2015 | Published 03/29/2015

Products Featured in This Question

LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens - 12V/24V

(2853)

$9.43

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

(693)

$4.44

2" Round Grommet - Flush Mount - Open Back

(283)

$3.54

Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens

(617)

$15.74

Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens

(1229)

$7.30

LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens - 12V/24V

(2852)

$8.71

Identification Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens

(784)

$36.73

GloLight LED Trailer Light w/ Flange - Brake, Tail, Turn - Submersible - Surface Mount - Oval - Red

(95)

$22.68

Question:

I was going through most of the specs but it started getting confusing. Im looking for the lowest profile LED replacement grommet lights. My current ones are near flush so thats what I would prefer in an LED. My trailer lights are 2 red 2inch round, model mc-53RB 2 Amber 2inch round same as red but Amber 2 red 6inch oval tail The others 2 lights license and center I can email pics so you can tell me what led replacements will match, Thanks

asked by: Damon S

Expert Reply:

For a grommet mount red 2 inch clearance light I recommend part # MCL55R1224B. This light uses a 2-wire pigtail, part # A46PB for installation. If you need amber, you would order part # MCL55A1224B. Installed without a grommet, these lights measure 2 inches diameter x 1 inch deep.

You can use the 2 inch grommet part # A54GB for this light for a flush mount. It would require a 2-5/16 inch mounting hole.

The tail lights I recommend are the Optronics GLOLight LED Stop/Turn/Tail Light, part # STL178RB. This is a 6-1/2 inch oval surface mount light that has brake light, turn signal, and tail light. This light has a red lens and 3-wire pigtail. This light measures 7-1/2 wide x 3-1/8 tall x 1 inch thick with the flange.

For a license plate light I recommend part # LPL55CB. This is an LED light with the mounting bracket.

For a center identification light, if you are interested in a mini light I recommend part # MCL13R2B. If you are looking for a longer light for the center of your trailer I recommend part # MCL78RB.