Brake Lights and Fender Lights for Enclosed Trailer

Question

Question:

I own a 2004 Horton Hauler Trailer. Its 7x17 with a V front. I would like to total rewire all the lights with new wire and lights as many do no longer work. Can you give me a parts list of what I would need. There are two brake lights In rear Two sets of orange / red lights on fenders There are 3 red market lights in rear of trailer also. I need an all inclusive part list for this. Thank you

asked by: Robert J

1

Helpful Expert Reply:

We can get you the right lights for your trailer, but just keep in mind that we don't have a way of knowing the exact replacement lights on any trailer, so if you want to utilize the same mounting holes, for example, you will need to measure the center-to-center mounting dimensions, or you can simply make new mounting holes if you like.

From what I can see of photos I looked up of your trailer, they all seem to be surface-mounted lights, so here is a list of what you can use.

- GloLight LED Trailer Tail Light # STL178RB (mounting holes 7" apart) or ThinLine LED Trailer Tail Light # STL63RB (mounting holes 14-1/8" apart)

- LED Trailer Fender Light with Mounting Bracket # OPT49FR (mounting holes 3" apart)

Along with these you will need the Butt Connectors # 05731-5.

I have added links below to video reviews for you to check out as well of these parts, and if you find you have different needs in regards to mounting, or mounting dimensions, please let me know.

expert reply by: Kyle S

1

Answer 1

Hey Justin, thanks for reaching out. We should have a tail light replacement for you, but those lights aren't make and model specific, so there isn't a way to look up your camper to know exactly which light it uses. I can still point you in…

view full answer...

Answer 2

Hey Eric, we do not have a gasket for the part #STL73RB as it does not normally need one.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Stuart, since you’ve already confirmed the truck and trailer wiring through the junction box and verified the grounds, the fact that the running lights, brake lights, backup lights, and turn signals all work individually points us toward the tail…

view full answer...

Brake Lights and Fender Lights for Enclosed Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching