bing tracking image
  1. Camper Jacks
  2. RAM
  3. A-Frame Jacks
  4. Pop Up Camper
  5. Teardrop Camper
  6. Travel Trailer
Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White
RAM

Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White

Part Number: EJ-3520-WBX
In Stock
$166.09
Camper Jacks
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle. 1-800-940-8924 to order RAM camper jacks part number EJ-3520-WBX or order online at etrailer.com. Free expert support on all RAM products. Great prices and Fastest Shipping for Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (1916)
  • Q & A (0)
  • Photos

RAM Camper Jacks - EJ-3520-WBX

  • A-Frame Jacks
  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • Electric Jack
  • 3001 - 4000 lbs
  • Bolt-On
  • RAM
  • 25-1/8 Inch Lift
  • 1 Jack
  • Steel

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.


Features:

  • Electric jack lets you raise and lower your A-frame trailer
  • Drop leg allows for increased lift and saves time when raising or lowering
    • Pin and clip holds leg at desired location
  • 2 Toggle switches on the front of the housing let you operate the jack
    • On/off switch controls light
    • Extend/retract switch controls up and down movement
  • LED light illuminates at a downward angle to help you focus on your coupler
  • Emergency crank (included) allows you to manually operate jack if needed
  • Black powder coated outer tube
  • Zinc-finished inner tube and footplate resist corrosion
  • Simple, bolt-on installation
    • Wires to 12-volt power source
      • 12-Gauge wires
    • Serrated washer included for ground connection


Specs:

  • Bracket height:
    • Retracted: 9"
    • Extended: 28-1/2"
  • Total lift: 25-1/8"
    • Screw travel: 19-1/2"
    • Drop leg travel: 5-5/8"
  • Clearance:
    • 20-1/2" From bottom of bracket to top of jack
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Hole spacing on drop leg: 1-7/8"
  • Footplate diameter: 5-1/2"
  • Lift capacity: 3,500 lbs
  • 1-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



EJ-3520-WBX Ram Powered Jack w/ Footplate - Drop Leg - A-Frame - 19-1/2" Screw Travel - 3,500 lbs - White





Customer Satisfaction Score:

Ratings & Reviews

4.6

1984 reviews
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. Includes a manual override handle.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
1984
Show More Reviews

See what our Experts say about this RAM Camper Jacks

  • Wiring Diagram for the Power and Light Switch On the RAM Electric Trailer Jack
    If you take a look at the diagram I've provided for the Replacement Power Switch for RAM Electric Trailer Jack with Footplate # EJ-3520-PSW which goes to the Electric Jack w/ Footplate # EJ-3520-WBX, you'll be able to see how both of the switches get wired.
    view full answer...
    Image 1 for
  • Diameter of Replacement Foot for etrailer or Ram Electric Jack
    The Replacement Foot for etrailer or Ram Electric Jacks # EJ-3520-FT has an inner diameter of about 1-1/2" and its outer diameter is 1-3/4" which is the measurement you'll need if you are looking for a replacement. This foot is designed to fit the Electric Jack # EJ-3520-BBX (Black) or # EJ-3520-WBX (White).
    view full answer...
  • Correct Replacement for Lippert Power Gear Jack 181794
    I am not sure what your exact question is but the Lippert Power Gear Jack 181794 has been discontinued and there are no replacement parts available for this. Therefore, if you have an issue with yours then you will need to replace the entire jack and the correct one for this is the Lippert Electric Trailer Jack with Footplate part # LC285318. There is also a more cost effective replacement as well, the Electric Jack w/ Footplate part # EJ-3520-BBX or part # EJ-3520-WBX. These three options...
    view full answer...
  • Electric A-Frame Jack Recommendation for Jayco Jay Flight Travel Trailer
    For a Jayco Jay Flight travel trailer that weighs 6100-lbs dry you will want an electric tongue jack rated as high as possible to ensure the jack does not have to work too hard; this will help it provide a longer service life. All of our bolt-on a-frame electric tongue jacks are shown on the linked page. These offer varying amount of lift, from 14- to 25-inches. We offer a great-value option in parts # EJ-3520-BBX (black)and # EJ-3520-WBX (white). This jack has 3500-lb capacity, 25-1/8-inches...
    view full answer...
  • Replacement Fuse & Cover For Ram 3520 Electric A-Frame Trailer Jack
    Hi Jerry, Yep, we can get you both the fuse and cover for your Ram 3520 A-frame jack. For the cover there is a black and white option, so just choose the one that matches what you have: - Replacement Cover for etrailer and Ram Electric A-Frame Jacks - Black # EJ-3520-BCV - Replacement Cover for etrailer and Ram Electric A-Frame Jacks - White # EJ-3520-CVRW Then for the fuse the correct part is the Replacement Fuse for etrailer or Ram Electric A-Frame Jack # EJ-FUSE.
    view full answer...
  • Electric Jack Options For A 2015 Keystone Hideout 27DBS Travel Trailer
    Hey Jason, Are you wanting just an electric tongue jack or a full leveling system for your trailer? If you're wanting just a tongue jack I recommend the Electric Jack w/ Footplate # EJ-3520-BBX (black) or # EJ-3520-WBX (white) along with a cover # UF38-944020 to help protect the head of the jack from the elements. If you're wanting a full leveling system that can automatically level the trailer then you'll want to go with the Electric Ground Control TT Automatic 5-Point Travel Trailer...
    view full answer...
  • Electric Jack EJ-3520-WBX - What Order Do The Washers Go In?
    Hello Jenni, thanks for reaching out. You are exactly correct with your guess. The flat washer goes on top of the star and below the bolt. We have an installation video that shows this and you can see the correct hardware placement in the screenshot below. I have also linked our install video for you below. If you fast forward to about the 11-minute mark you can see our technician install the hardware.
    view full answer...
  • Will etrailer A-Frame Powered Jack Fit Weekend Warrior Camper
    Hey Alberto, so you should probably measure to be sure but the jack # EJ-3520-WBX does have a slightly smaller tube diameter at 2-1/4 inch outer diameter for the outer tube and 2 inch for the inner leg. I'd be a little surprised if this didn't work for you.
    view full answer...
  • Replacement Power Switch for a Ram 3,500 lb. Electric Jack
    If your Ram 3,500 lb. electric jack looks like the Electric Jack w/ Footplate part # EJ-3520-BBX, # EJ-3527-BBX, or # EJ-3520-WBX then the Replacement Power Switch for RAM Electric Trailer Jack with Footplate # EJ-3520-PSW is the correct replacement switch. If you do not have one of the above jacks and could send me pictures of your jack and switch, I would be happy to help look into this further.
    view full answer...
  • Options for Replacing Lippert Power Drive Tongue Jack 1817941
    It sounds like you're looking for a replacement internal component for an older/discontinued Lippert electric jack like model number 1817941. According to Lippert, the internal components are not serviceable on these types of jacks, which means they are not available separately or even have a part number assigned to them. When something like that fails, it's just safer to replace the entire unit as other integral parts tend to go soon after. The only solution is to replace your jack...
    view full answer...
    Image 1 for
  • Are There Replacement Control Panels For The Lippert Smart Jack
    Unfortunately, Lippert doesn't offer replacement parts for the Lippert Smart Jack Electric Trailer Jack w/ Footplate # LC643589 so the only way to get them would be to take them off of another Lippert Smart Jack. I highly recommend swapping out the jack entirely to one like the Electric Jack w/ Footplate - White # EJ-3520-WBX (black # EJ-3520-BBX), which we carry replacement parts for so that you don't have to replace the jack for a simple part replacement. I also recommend picking up...
    view full answer...
  • Troubleshooting Ram 3,500 lb Trailer Tongue Jack Working Intermittently
    I reached out to my contact at Ram and he said that their electric jacks, like part # EJ-3520-BBX, # EJ-3520-WBX, or # EJ-3527-BBX have one fuse and it is located on the black wire where it enters the housing. From what you described I believe your problem is a bad ground. These jacks ground through the mounting hardware so if the connection isn't solid and constant it can cause the issues you are having. What my contact recommended doing was taking some of the paint off of the trailer...
    view full answer...
  • How to Replace Power Switch on RAM Electric Jack w/ Footplate
    It sounds like you have either the Electric Jack w/ Footplate part # EJ-3520-BBX or the Electric Jack w/ Footplate part # EJ-3520-WBX. If that is the case then the Replacement Power Switch part # EJ-3520-PSW is the correct replacement for you. In order to replace the switch you need to take a flathead screwdriver or pick and pry the top and bottom of the switch to release it from the housing. You can then unplug the spade connectors from the old switch and into the new switch making sure...
    view full answer...
  • Recommended Replacement Trailer Jack for a Northwood Arctic Fox
    The Electric Trailer Jack A-Frame part # EJ-3520-BBX for black or part # EJ-3520-WBX for white is an excellent option for a Northwood Arctic Fox. The Electric Trailer Jack A-Frame will also work just fine in cold weather as well so there should be no issues here. In regards to capacity, the Electric Trailer Jack A-Frame has a 3,500 lb rating which will exceed the Northwood Arctic Fox. The higher the weight capacity of the jack is in relation to the weight of the trailer, the longer it will...
    view full answer...
  • Recommended Trailer Jack for Aliner Scout to Use with Jack It 2 Bike Carrier
    It looks like the Aliner Scout has a dry weight of around 1350-lbs and a tongue weight of around 135-lbs when unloaded. Since you need a side-wind jack, I recommend using the etrailer.com Round, A-Frame Trailer Jack # TJA-5000S-B which will easily handle the weight of your Aliner Scout trailer; since this jack does not come with a foot plate you'll want to also get the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks # JF-99. If you wanted to go with a premium option, I recommend...
    view full answer...
  • Replacement Cover For Ram 3500lb Electric Trailer Jack
    I am sorry to hear that the cover on your Ram 3500lb electric jack broke. There are two different covers based on which jack you have. If you jack is the Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White # EJ-3520-WBX you will need the Replacement Cover # EJ-3520-CVRW, or if you have the # EJ-3527-BBX you were looking at you will need the Replacement Cover # EJ-3520-BCV.
    view full answer...
  • Recommended Replacement Drop Leg for a Bulldog Tongue Jack
    It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item # BD500190. This is an exact replacement part. The Replacement Foot for etrailer or Ram Electric Jacks item # EJ-3520-FT you were looking at will not work on your jack as it was designed to be use with the item # EJ-3520-BBX or item # EJ-3520-WBX jacks.
    view full answer...
  • What Size Fuse Protects Etrailer A-Frame Powered Jack # EJ-3520-WBX
    The fuse that protects the powered a-frame jack part # EJ-3520-WBX is a 30 amp fuse part # EJ-FUSE. It's inline on the power wire of the jack so you don't have to worry about it aside from just powering the jack up like normal.
    view full answer...
  • What Capacity for Electric Jack Would be Needed for 5,000 lb Trailer Jack
    You are correct that trailer jacks weight ratings are not for lifting the entire trailer weight and only the tongue weight. So for a trailer that weighs 5,020 lbs when fully loaded you'd be looking at only lifting about 500 lbs or so. That would mean that a 4,000 lb rated jack like you mentioned would easily work well and have more than enough capacity. The Electric Jack part # EJ-3520-WBX that you referenced has a 3,500 lb capacity and would work great. It's a great economically priced...
    view full answer...
  • Replacement Manual Jack Handle For A RAM Electric A-Frame Jack
    To manually operate a RAM jack like the Electric Jack w/ Footplate # EJ-3520-WBX you would simply need the Replacement Manual Jack Handle for etrailer or RAM Electric A-Frame Jack # EJ-3520-HD.
    view full answer...
  • How to Determine Correct Size Electric A-Frame Tongue Jack for 12,500-lb Triple Axle Trailer
    The correct electric A-Frame trailer tongue jack for your 12,500-lb triple axle travel trailer will need to have the capacity that will surpass your trailer's loaded tongue weight, which is typically between 10 and 15 percent of the loaded trailer's weight. So your 12,500 pound trailer would have a tongue weight between 1250 lbs and 1875 lbs, so any trailer jack rated over 2,000 lbs would be sufficient to lift the trailer's tongue, however I recommend a higher capacity and high quality...
    view full answer...
  • Replacement Electric Atwood A-Frame Jack for a 2006 Weekend Warrior M-2200 FB
    The majority of electric a-frame trailer tongue jacks will have a 3,500 lb weight capacity which is most likely what your old Atwood jack is. If not, the 3,500 lb capacity will be more than enough for you because it only needs to be rated for the tongue weight of the trailer. For this, I recommend the Electric Jack w/ Footplate part # EJ-3520-WBX which will be an easy swap with no drilling required. This jack also comes with a drop leg therefore it will take much less time to lift/lower...
    view full answer...
    Image 1 for
  • Can I Use My 12 Volt Circuit From My Vehicle Wiring To Power My Electric Jack.
    Yes you can splice in to the power wire on your (vehicle end) 7-WAY and that will work. Or you could add a connector like the Bargman 7-Way, RV-Style Connector w/ 10' Heavy Duty Insulated Cable - Trailer End # 54006-059 to the connector on the Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White EJ-3520-WBX and plug it directly into your truck's 7-way when using the jack. Then it will work for you. We also have the Electric Trailer Jack - Drop Leg - A-Frame...
    view full answer...
  • Can Electric Trailer A-Frame Jack Be Powered By Power Port in Cargo Area of Tow Vehicle
    The best way to power an electric A-Frame jack is with a trailer mounted battery and use the 12V accessory power feed from the trailer connector to provide a maintenance charge to the battery. If that isn't possible, the only other acceptable methods would be to tap the jack power wire into the 12V feed from the trailer connector or install a 7-way plug like # A7WCB on the jack power wire and directly use the 7-way on the tow vehicle to power the jack. The 12V accessory socket/power...
    view full answer...
    Image 1 for


< Previous
123. . .5



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee David F
Video by:
David F
Employee Thomas T
Video by:
Thomas T

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<