Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Your idler hub is worn and the wheel has play in it. You swap in this hub with a 6 on 5-1/2 bolt pattern for 5,200 to 6,000 lb axles. It installs clean, and pre-greased bearings keep the wheel spinning smooth again.
Designed for 5,200 lb to 6,000 lb axle spindles, this hub fits many equipment and utility trailers. Matching your bearing sizes is the easiest way to confirm compatibility.
This is an idler hub, so it does not include a drum or braking surface. It is used on trailers without brakes to support the wheel and allow it to spin freely.
Bearings are pre-packed and races are installed, which cuts down installation time and helps ensure everything is properly seated.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to halfway between the opposite holes.
Measuring the distance (D) between adjacent holes can also help determine bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer.com. Today, we're looking together at our Terran Industries trailer idler hub assembly for 5,200 to 6,000 -pound axles, and it's a 6 lug on 4 1/2 inch lug pattern. So folks, again, a complete hub kit like this is gonna give you included pre-matched inner and outer bearings, the grease seal and dust cap with the plug if you have an EZ Lube or an etrailer Easy Grease trailer axle or spindle. And as you can see, the grease seal and inner bearing are already pre-installed and greased. So, before you install the outer bearing, you wanna make sure you grease that up and everything and then put your cap on after you've got everything on the castle nut, cotter pin and whatnot.
And then, of course, your lug nuts for all the studs. So again, 6 on 5 1/2 inch bolt pattern. It fits common wheels used on utility and livestock trailer, and again, this would be great for a 5,200 to 6,000-pound axle. The wheel size, it's probably between 14 1/2 to 16 1/2 inch. The weight capacity on this hub is between 26 to 3,000 pounds per hub.
So obviously, two of these at 3,000 gets you that 6,000-pound rating for axle. So this again, is a pre-greased bearing and everything, so it's gonna be quicker, it's gonna minimize friction, reduce wear and tear for a long-lasting use. These are high-quality parts. They even have a protective corrosion-resistant coating on the outside of the hub and everything to ensure that it's not gonna corrode or rust anytime soon. Well folks, I think that will wrap it up for our quick look together at this Terran Industries trailer idler hub assembly.
I'm Steven, thanks for watching.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Lazer S.
1/27/2026
Glad it fit, Paul! Looks like your cat will miss the old hub though. : P What kind of trailer did you install this on? Or is it for a different application?