Upgrading 3500 lbs Axle to Timbren Axle-Less Trailer Suspension
Published 10/19/2026 >
Products Featured in This Question
Question:
I have a 2025 Look element 8.5 x 24 Cargo Trailer with 3500lb axles. Could I upgrade to 5200lb using Timbren Axle-Less Trailer Suspension - Standard Duty - 4inch Lift - 5 Bolt Flange - 5,200 lbs
asked by: William G
Expert Reply:
Welcome back William. There's no technical reason you couldn't replace your existing 3,500 lbs axles with the Timbren Axle-Less Trailer Suspension # TASR5200S03, but there are a few important things to consider before making the switch.
First, upgrading to a heavier duty axle or independent suspension system does not increase your trailer's GVWR. The axles are only one part of what determines the trailer's overall weight capacity. Other components, including the frame, wheels, tires, and suspension all factor into that rating.
The other major consideration is that you'll likely need to replace several additional components to accommodate the larger spindles on the Timbren system such as the hubs, wheels and tires, and brakes if you run them. A trailer with 3500 lbs axles uses a hub sized for the spindle on that axle and isn't going to fit the spindle on the # TASR5200S03 system. I'm also guessing your trailer has a 5 on 4-1/2" bolt pattern which is the most common on this size axle. This system requires a larger hub assembly. If your trailer has brakes, you would need a hub and drum assembly like Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K or idler hub like Terran Industries Trailer Idler Hub Assembly for 5,200 to 6,000 lbs Axle # TX43VJ if you don't have brakes.
If your trailer does have electric brakes, you'll also need to upgrade to 12" brake assemblies with a 5-bolt mounting pattern, such as the etrailer Self-Adjusting Electric Trailer Brakes # AKEBRK-7-SA.
Since these larger hubs use a different bolt pattern than most 3,500-lb axle hubs, you'll also likely need to replace your wheels and possibly your tires to match the new hub configuration and maintain the proper load ratings.
What wheel bolt pattern do you currently have on your trailer, and is it equipped with electric brakes?
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 5200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: What Parts Do I Need to Install the Timbren Axle-Less Trailer Suspension # T99GR?
- Q&A: Can Timbren Axle-Less Trailer Suspension System Be Welded To Trailer For Installation
- Article: How to Choose a Trailer Hitch Coupler
- Q&A: Using 6000 lb Hubs on 7000 lb Axle
- Q&A: Can 6,000 Lb 6 on 5-1/2 Hubs Be Swapped Out for 7,000 Lb 8 on 6-1/2 Hubs
- Q&A: How Close to Trailer Weight Should Capacity of Trailer Leaf Spring Be
- Q&A: What Is The Difference Between Timbren xle-Less Trailer Suspension T54KV And TASR5200S03?
- Article: Where to Position the Trailer Axle?
- Article: How to Measure a Trailer Axle
- Article: How Does a Trailer Hitch Coupler Work?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings


