Dexter Trailer Hub-and-Drum Assembly - 4.4K Axles - 6 on 5-1/2 - 10" Drum

$226.05

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

dexter trailer hubs and drums hub with drum for 4400 lbs axles hub-and-drum assembly - 4.4k 6 on 5-1/2 10 inch

dexter trailer hubs and drums hub with drum standard

dexter trailer hubs and drums hub with drum 6 on 5-1/2 inch hub-and-drum assembly - 4.4k axles 10

dexter trailer hubs and drums for 4400 lbs axles 6 on 5-1/2 inch dx53wr

dexter trailer hubs and drums standard 6 on 5-1/2 inch dx53wr

dexter trailer hubs and drums hub with drum 6 on 5-1/2 inch

dexter trailer hubs and drums standard for 4400 lbs axles

dexter trailer hubs and drums standard for 4400 lbs axles dx53wr

Show All (9) Product Images

Show Fewer Product Images

Videos

Review of Dexter Trailer Hubs and Drums - Hub with Drum - DX53WR

Show All (1) Videos

Show Fewer Videos

SCHEDULE AN INSTALLATION

This hub-and-drum comes with bearings and races already installed, so setup moves fast. Finish the job, clean up, and get back on the road before the sun dips behind the tree line. Great Prices for the best trailer hubs and drums from Dexter. Dexter Trailer Hub-and-Drum Assembly - 4.4K Axles - 6 on 5-1/2 - 10" Drum part number DX53WR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Q & A (0)
Related Parts
Photos

Dexter Trailer Hubs and Drums

This hub-and-drum comes with bearings and races already installed, so setup moves fast. Finish the job, clean up, and get back on the road before the sun dips behind the tree line.

Highlights

Pre-Installed Bearings and Races: Includes bearings and races already installed in the hub-and-drum for an easier setup.
Fits 4,400-lb Axles: Designed for axles with standard brake assemblies.
Brake-Compatible Surface: Works with electric or hydraulic 10" drum brakes.
Cast Iron Construction: Durable iron housing built for everyday towing needs.
6 on 5-1/2 Bolt Pattern: Matches common trailer wheel sizes from 13" to 15".
Made in the USA: Quality-tested and manufactured for consistent performance.

Specs

Application:

Axle Rating: 4,400 lbs
Brake Compatibility: 10" electric or hydraulic drum brakes
Wheel Size Range: 13" to 15"

Dimensions:

Drum: 10" diameter x 2-1/4" wide
Grease Cap Flange Diameter: 1.988"
Wheel Bolt Diameter: 1/2"

Bolt Pattern:

Pattern: 6 on 5-1/2"

Capacity:

Per Hub Weight Capacity: 2,200 lbs

Construction:

Material: Iron
Country of Origin: USA

Bearing, Race, and Seal Information:

Bearings (pre-installed and included):
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L68149 (1.378; inner diameter)
Races (pre-installed and included):
- Inner race: L68111
- Outer race: L68111

008-498-05 Dexter Trailer Hub and Drum Assembly for 4,400-lb Axles - 6 on 5-1/2 Bolt Pattern - 10" Brake Drum

Item # DX53WR

California residents: click here

See what our Experts say about this Dexter Trailer Hubs and Drums

Do you have a question about this Trailer Hubs and Drum?

Wheel Bearings and Grease Seal for 2023 Keystone Cougar 23MLE
Hi Dale, it looks like you have the resurrected 4,400 lb hubs like # DX53WR with the # L68149 inner and outer bearing. These had been phased out but are making a comeback. You also need # L68111 for the races and 10-19 grease seals # RG06-050.
view full answer...
Correct CRE3000 and MORryde Suspension Upgrade Kit for 2021 Grand Design Imagine 2670MK
Hey Justin! The correct CRE3000 for your 2021 Grand Design Imagine 2670MK is the MORryde Shock Absorbing Suspension Equalizers # MR27ZR. According to the Grand Design parts site you have 35" axle spacing so this is the right kit. They also show you have 2-1/4" shackle straps so you need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR. For a hub/drum assembly with bearings and Dexter Nev-R-Adjust brakes I will need some additional information. They show you have a...
view full answer...
Replacement Bearings for 2019 Grand Design Imagine 2670MK
Hello again Dave, can you email me a picture of your axle tag? We already know it is a 4,400 lb axle but those bearing combinations can vary depending on the spindle they used. If you respond to the email with the link for this page it will come to me directly.
view full answer...
Correct Bearing Kit for 2024 Winnebago 2326RB
Hey Allen! That is an error on our site under the Dexter Bearing Kit for 4.4K Axles # DX86ER. The # L68149 is strictly a bearing part number. The outer race will be the same # LM67010 listed in your photo which would make it the correct kit. Have you verified if that is correct for the spindle on your D44 axle? Some of the newer Dexter 4,400 lb axles use a hub like # DX53WR with the # L68149 for the inner and outer bearing. If you aren't sure, I went ahead and sent your serial number off...
view full answer...
What Hubs Can I Use On an Older Trailer?
Thanks for your question, Jean. How old is your trailer? If it's an original axle and from the early 2000's or older it could have a short spindle. Short spindles would need hubs that are about 3-1/2" long. You can measure this by measuring the length of the hub bore from end to end. Newer, or also called modern spindles, will be closer to 4" or a tad longer. I'd also need to know what your bolt pattern to see if we have something that would also fit your existing wheels. Bearing # L68149...
view full answer...
Availability of Disc Brake Kit for 2026 Coachmen Freedom Express 29SE With 4,400 lb Dexter Axles
Hey Mark! We have a hub and rotor assembly with that bearing combination but it is designed for a specific axle with a shorter spindle. The only option would be to use the Trailer Idler Hub Assembly # DX45BR. However, these hubs are rated for 4,200 lb axles so you're going to lose 400 lbs of capacity between the two axles with these hubs installed. These also have a 5 on 4-1/2 bolt pattern so it sounds like new wheels would be required if the # DX53WR with a 6 on 5-1/2 bolt pattern were...
view full answer...

Do you have a question about this Trailer Hubs and Drum?

Info for this part was:

Installed by:

Jeff D

Updated by:

Wilson B

Written by:

Matthew S

Edited by:

Daron K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.