Extra-wide aluminum ramps let you load and unload an ATV, UTV, lawn mower, or other wheeled item into or out of your trailer. Arched design helps prevent low riders from bottoming out. Ramp set offers a combined weight capacity of 3,000 lbs.
Features:
Specs:
These ramps with a combined load capacity of 3,000 lbs are perfect for year-round use. The 2 extra-wide ramps can be spaced to line up with the wheel width of your equipment, which makes them great for 4-wheeled equipment, such as your ATV, UTV, lawn mower, or golf cart. The rubber-tipped ends help to stabilize each ramp when placed on your trailer for added safety when loading and unloading. The sturdy yet lightweight aluminum construction and attached safety straps make this set of ramps easy and safe to use.
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
Extra-wide aluminum ramps let you load and unload an ATV, UTV, lawn mower, or other wheeled item into or out of your trailer. Arched design helps prevent low riders from bottoming out. Ramp set offers a combined weight capacity of 3,000 lbs.Ramps work great. The ramps are nice and wide which allow for easy loading and unloading. Super light yet so far seem to hold up to heavy tractor loads without issue. The rubber tips were more like hard plastic. One cracked and split on first load so might not last long but minor issue.
These ramps are awesome. They are very sturdy and safe to use when installed properly. Light weight for handling but plenty strong to support my Kawasaki Mule 4010 Trans. Yes I reccomend these ramps and retailer for any UTV customer.
I use these ramps to get my JD-2305 with Bucket Loader, and a Cadet Volunteer UTV in and out of a shipping container garage, that is 16" off of the ground. They work GREAT for this function. My only complaint, is the rubberized plastic ends didn't make it more then a month, as they just disintegrated with use.! I ended up just wrapping the ends with Duct Tape. Other then that, they are nice, light and do the job!
My new ramps came today. They look substantial and will take the weight of my BX1800 when I go to different properties. Thanks to previous reviews, I will wrap the rubber covered ends with duct tape. Dudley, NH
Quality built, extremely light weight. My wife loves them.
I have a 5x10 trailer that I use these ramps to load my kubota bx2380 tractor and my zero turn on. It's a heavy duty set of ramps. I have drilled holes and use bolts to hold down as the tie straps didn’t last and the rubber pads on the teeth on the ramp have fallen off. Even with that said I would buy these ramps again. And very impressed with etrailer as a company. Their videos were very helpful initially as I was deciding what ramps to purchase
Half of this pair of ramps is becoming a dog loading ramp for my daughters big 70lb hybrid pit dog that is almost as wide as the ramp!! He's a great dog but having trouble getting in and out of her jeep so Dad made her a loading ramp to get the big guy in and out of the back of the jeep. I've covered the ramp with an all season rubber mate and it is working perfectly at it's new job! The aluminum construction really saved the weight and the wide stance allows loading and unloading with no tilting. Will add pictures when I get it delivered this next week.
etrailer products always great quality. shipping is fast. videos for me are very important.
The strength of the lightweight aircraft technology welded aluminum ramps is impressive. We purchased the ramps because of their 20.5 inches width and 3000 pounds load capacity. The ramps worked somewhat well until during a thunder storm my wife forgot to raise the deck of our 1380 pounds John Deere 930D zero turn mower high enough to clear the two welded supports on each ramp that attach the ramps to the trailer. The mower deck sheared one of the welded supports off each ramp. Also, the ramps moved about quite a bit when driving the mower onto them, even with the stabilizing straps from the ramps to the rear of the trailer being adjusted as tight as we could pull them. RECOMMENDATION: Design the ramps with the same 20.5 inches width and 3000 pounds load capacity but instead put a 90 degree tongue-teeth catch attachment capability for connecting the ramp to the rear of a trailer. The main reasons we purchased the ramps were they being light weight and wide enough to support the front wheels of the 1380 pounds 930D zero turn mower while driving onto the trailer.
Have a Kawasaki Pro KAF820 fxt mule. Handled the weight perfectly. nice light ramps
No issues. Work great every time
These ramps are a good value for the money, well made and easily support loading our loading our 4 person Polaris Ranger on our snowmobile trailer. We substituted ratchet straps to hold the ramps tightly to the trailer when loading and unloading.
I had a great experience with your company. I goofed and purchased the wrong ramps (not discovering my error until I received them) and when we called to tell what happened and we would like to purchase a different set of ramps your company made the process very easy and exceeded our expectations. I will definitely do business with your company again and will highly recommend your company as well.. Thanks again for all you did..
Great set of affordable, wide, heavy duty ramps. I like that they came with safety straps. I bought these to load a side by side and ATV trailer into a 20' box truck we converted into a shed. I can remove the strap and put the ramps in the shed to keep them out of the way and so they aren't stolen. We've also used them as "bridges" over ditches for wheelbarrows when we replaced a water line in our barn.
I recently purchased the 65" long x 20-1/2" wide Loading Ramp Set. #28807489. The ramps were much better than I thought they would be. The quality is excellent, they are light and easy to handle, and allow my Zero Turn to load and unload easily from my trailer. Another advantage of the ramps is that they free up the use of the trailer for other jobs without needing a permanent ramp installed. There were absolutely no problems, within 5 minutes of opening the box, I was ready to load the mower. In addition, I was pleasantly surprised at how quickly they were delivered. Great doing business with etrailer.com
Seems well built
These ramps solved my problem of getting my Lawn tractor into my shed, which is 18" higher than ground level. I tried making wood ramps myself, that failed. These aluminum ramps are "strong" and lightweight, and easily supports my tractor. Highly recommended.
These ramp are very very nicely made I would definitely buy them again prompt service they were very timely on arrival and the staff at etrailer are very good with there service they provide to the customer I use the for loading a A TV IN MY CARGO TRAILER they are perfect for my application thanks etrailer for selling very nice quality products thanks to all there for your 5 star service I will contact this company for any future orders most definitely nice prices and very nice customer service KUDO'S TO YOU ALL THANKS , KEEP UP THE NICE WORK AND YOUR QUALITY PRODUCTS AND US CUSTOMERS WILL CONTINUE TO KEEP BUYING your products GOD BLESS YOU ALL AT ETRAILER HAVE A NICE DAY .also want to add 5 stars would go higher than 5 stars if there were 10 stars or more.
I have not used the product yet but excited to use it the only thing is that the box was pretty damaged when I received it yesterday so hopeful the product is ok and very happy how fast it was delivered I mow lawns for the apartments that I manage and my home made ramps that my husband and I made finally gave out after 10 years and he passed away in December so I needed something fast to load the lawn mowers
I installed these ramps on My back patio so I could store my Kawasaki Mule there. The Mule weighs 1600 lbs and the ramps worked perfectly. I had to improvise the tie down procedure due to the ramps being permanently installed.Thanks etrailer for an excellent product at a fair price. Steve
Although I won’t use them for several weeks, these ramps appear sturdy and well made. With a side by side, I wanted these wider ramps for 12” wide tires. The packaging is typical Chinese boxing, so was in terrible condition after the UPS journey. Regardless, the ramps were in excellent condition and arrived quickly.
I wanted ramps with a higher load rating. These are 3000lbs which is really good for aluminum ramps. They are extremely well built and very light. Your videos on your products takes the worry out of buying online. You will not find a better ramp at this price point. Thank you etrailer
I was skeptical when I first ordered. Most items I order end up less quality than they appear in ad. I was extremely satisfied and would recommend this website to anyone. The ramps were extremely durable.
Looks great seem to work just fine
I think they're pretty darn good but I wish they'd invent some sort of non-slip system other than the straps. I got tired of using the straps and ended up buying much more expensive Race Ramps which you just place and forget. These ramps did get the job done though.
Do you have a question about this ATV Ramp?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.