See what our Experts say about this Demco Accessories and Parts

• Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
  Since Demco uses 3,500 drum brake assemblies part # DMSB24429M and # DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part # AKEBRK-35L-SA for the left hand side and # AKEBRK-35R-SA for the right hand side. To wire these up you'd just need 10 gauge wire like the part # 10-1-1 which we sell by the foot. Then to add a 7-way the easiest way to do that is with the 7-way junction box # e99011.
  view full answer...
• Surge Brakes for Demco KK260 Tow Dolly
  Hey George! I do have brakes made specifically for your Demco KK260 Kar Kaddy! Demco Hydraulic Drum Brake - Single Servo - Galvanized - 10" - LH - Self-Adjusting - 3,500 lbs # DMSB24429M and Demco Hydraulic Drum Brake - Single Servo - Galvanized - 10" - RH - Self-Adjusting - 3,500 lbs # DMSB24428M will fit directly onto your tow dolly and they're made by Demco to work with a surge brake actuator. I was able to find other replacement parts for your KK260 dolly. What other parts or maintenance...
  view full answer...
• Can I Convert the Disc Brakes to Electric on a Demco Car Carrier AT7000P?
  You absolutely can! I would just need to know what size bearings are currently on your trailer and what the lug pattern is to recommend you the correct electric brake hubs. This information isn't available online. If you could email it to me directly or comment below I would be happy to help you get set up. Here are some other parts you're going to need: 7-Way and Junction Box - 7-Way Molded Trailer Wire Connector item # H20043 and the Trailer Wiring Junction Box item # 3375601101 Electrical...
  view full answer...
• Replacement Drum Brakes For A Demco Kar Kaddy SS Tow Dolly
  Hi Mike! I assume yours is an older one? The new Kar Kaddy SS comes with disc brakes, which is why I ask. Anyway, the etrailer Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs # AKUBRK-35R (and left hand # AKUBRK-35L) follows the standard 4-bolt mounting pattern (see attached picture), which may work with your Demco Kar Kaddy SS. But, I couldn't find the bolt pattern for it listed anywhere, so I would definitely measure this to make sure. If you get an odd measurement...
  view full answer...
• Replacement Disc Brake Pads for a Demco Kar Kaddy SS
  Thanks for reaching out! The replacement brake pads for your Demco Kar Kaddy SS # DM9713045 can be found as part # DM59VR on our site. This includes parts for both sides of the tow dolly. If you want to replace the whole assembly then you can do so by picking up 2 of the following: Hub Assembly - # DM04369 Brake Caliper Assembly - # DM13825-92 10" Brake Rotor - # DM03927-92 Brake Caliper Mount Bracket - # DM13920-92 (if worn out) To check and see if your brakes are actually activating...
  view full answer...
• Replacement Brake Assemblies and Master Cylinder for 2002 Demco Kar Kaddy KK360SB Tow Dolly
  The replacement brake assemblies are # DMSB24429M for the left side and # DMSB24428M for the right. The replacement master cylinder is part # 5650.
  view full answer...
• Need Hydraulic Trailer Brake Kit for 1999 Demco Kar Kaddy Model KK360
  The Hydraulic Trailer Brake Kit, # AKUBRK-35 that you linked to is for a 10" diameter x 2-1/4" wide and for 4 bolt flange. It does appear that his will fit the application you are asking for, for the 1999 Demco Kar Kaddy Model KK360 with drum brakes. However, I will point out that we have the recommended replacement brake assemblies for the Demco Kar Kaddy in # DMSB24429M for the left side and # DMSB24428M for the right. The # AKUBRK-35 is a good product but Demco does recommend the...
  view full answer...
• Correct Hydraulic Drum Brakes For Demco Kar Kaddy Tow Dolly
  The Demco Kar Kaddy tow dolly does require these specific brakes, and there aren't other kits that will work, it does need the following: - Left Hand: Demco Hydraulic Drum Brake - Single Servo # DMSB24429M - Right Hand: Demco Hydraulic Drum Brake - Single Servo # DMSB24428M The reason for that is these brakes mount to a specific bolt pattern of 4 on 3.96" which is different than standard hydraulic brake kits; essentially, they are designed specifically for use with the Demco Kar Kaddy...
  view full answer...
• Replacement Brake Assemblies for Demco Kar Kaddy Tow Dolly
  The replacement brake assemblies for your Kar Kaddy are # DMSB24429M for the left side and # DMSB24428M for the right.
  view full answer...
• Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
  Hello Steven. The mounting studs that come with the # AKEBRK-35L-SA technically are removable. You would probably have to knock them out with a hammer or a rubber mallet if you want to remove them. These will bolt up to a standard 4 bolt brake flange, and you would just attach the nuts from the back of the flange. If your brake flange already has bolts, you can just knock them out of the backing plate.
  view full answer...
• Replacement Brake Assembly For Demco Car Dolly
  If you are looking for brakes that will work with your Demco Car Dolly, we have just what you need. For the right hand you will need part # DMSB24428M. For the left hand side you need part # DMSB24429M. These are 10-inch x 2-1/4 inch brakes for 3,500-lb axles and are designed to work with 13 to 15-inch wheels. We do not offer the brake drums for the Demco car dolly.
  view full answer...
• Trailer Brake Recommendation for LoadRite Boat Trailer with 10 x 2-1/4 Inch Wheels
  There are many possible reasons why your brake could have failed. It is hard to specify why yours may have failed. I recommend checking the reverse lock-out on your actuator to make sure it is working properly. Backing up with your trailer connected if your reverse lock-out isn't functioning could be why your brakes failed. If the lock-out isn't working, you could use the Demco Hydraulic Drum Brake Assembly - Free Backing # 40716, # 40715. These brakes would allow you to back up with your...
  view full answer...
• Does the Demco Hydraulic Drum Brake Assembly Come With the Drum?
  I do have a solution for you but the answer to your question is no, the Demco Hydraulic Drum 3,500 lbs - 10" Brake Assembly # DMSB24429M is just the brake assembly without the drum. Keep in mind that when selecting a brake assembly and hubs that you make sure they will have the same weight capacity that your axle has. You will want to make sure that whichever brake assembly you choose that you get the Right Hand side as well, in this case it would be the Hydraulic Drum Brake part # DMSB24428M. I...
  view full answer...
• Replacement Brake Assembly Recommendation for 1997 MasterCraft 20 ft Boat
  Since your trailer has 10 inch by 2-1/4 inch brake assemblies currently all of the assemblies you mentioned are going to work. I would go with the sefl-adjusting part numbers # DMSB24428M and # DMSB24429M though since you mentioned you were interested in that option. The matching Titan assemblies are part # T4423500 for the left hand side and part # T4423400 for the right hand side. Based on the seal dimensions you listed the part # 168233 is the correct replacement. We don't carry...
  view full answer...

Do you have a question about this Accessories and Part?