Can I Convert the Disc Brakes to Electric on a Demco Car Carrier AT7000P?
Updated 06/04/2024 | Published 05/28/2024
Products Featured in This Question
Question:
I have a Demco car Carrier AT7000P. Can I convert the stock hydraulic disc brakes to electric brakes? Thank you
asked by: Jason R
Expert Reply:
You absolutely can! I would just need to know what size bearings are currently on your trailer and what the lug pattern is to recommend you the correct electric brake hubs. This information isn't available online. If you could email it to me directly or comment below I would be happy to help you get set up.
Here are some other parts you're going to need:
7-Way and Junction Box - 7-Way Molded Trailer Wire Connector item # H20043 and the Trailer Wiring Junction Box item # 3375601101
Electrical Wire - 10 Gauge, Brake Wire - per Foot item # 10-2-1
Product Page this Question was Asked From
Demco Hydraulic Drum Brake - Single Servo - Galvanized - 10" - LH - Self-Adjusting - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Continue Researching
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Q&A: How to Add Brakes to Older Demco Kar Kaddy 3
- Q&A: Replacement Parts For Kar Kaddy 2 Tow Dolly
- Q&A: Replacement Drum Brakes For A Demco Kar Kaddy SS Tow Dolly
- Q&A: Will Standard 3.5K Brake Assemblies Fit A Backing Plate Bolt Spacing Of 2-3/4" And 2-7/8"?
- Q&A: What is Standard 4 Bolt Pattern Trailer Brake Flange Dimension
- Q&A: How Does the Demco Replacement Hub Part # DM04369 Replace/Install
Jason R.
6/4/2024
Hey there, thank you for the response. The trailer has sealed hubs that have bolt pattern 6x115MM. The sealed hub has a square flange that bolts to the axle. I does not have a spindle or removable bearings. Thanks