Up to $50 Online Rebate When You Purchase Up to 6 Qualifying Dexter Brakes.

Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs

Part Number: 23-469

328 Reviews | 77 Questions

In Stock

$105.51

Retail:$113.91

$85.51 after $20.00 Mail-In Rebate

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Accessories and Parts 23-469 - RH - Dexter

Accessories and Parts 23-469 - Electric Drum Brakes - Dexter

Accessories and Parts 23-469 - 10 x 2-1/4 Inch Drum - Dexter

Dexter 10 x 2-1/4 Inch Drum Accessories and Parts - 23-469

Show All (13) Product Images

Show Fewer Product Images

In Use/Installed

23-469 - Electric Drum Brakes Dexter Accessories and Parts

Dexter Electric Drum Brakes Accessories and Parts - 23-469

23-469 - Brake Assembly Dexter Trailer Brakes

Dexter 3500 lbs Accessories and Parts - 23-469

Show All (6) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs customer photo

Show All (9) Customer Images

Show Fewer Customer Images

Videos

Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly

What to Know About the Dexter Nev-R-Adjust Electric Trailer Brake Assembly

Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brake Assembly

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels. 1-800-940-8924 to order Dexter accessories and parts part number 23-469 or order online at etrailer.com. Free expert support on all Dexter products. Great prices and Fastest Shipping for Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs. Accessories and Parts reviews from real customers.

All Info
Reviews (328)
Q & A (0)
Related Parts
Photos

Dexter Accessories and Parts - 23-469

10" x 2-1/4" Passenger's-side electric trailer brake assembly fits 3,500-lb axles. Mounting flange has a 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.

Features:

Electric brakes are easier to install and offer more user control than hydraulic brakes
- Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power
- No need for manual brake adjustments
- Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
Mounting bolts and hardware included
Made in the USA

Specs:

Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
Configuration: right hand (passenger's side)
Dimensions: 10" diameter x 2-1/4" wide
Mounting flange bolt pattern: 4 bolt
- Distance between bolt holes: 2-7/8" apart on center
Wheel size: 13", 14", and 15"
Axle rating: 3,500 lbs
Limited 5-year warranty

K23-469-00 Dexter 10" Nev-R-Adjust Electric Brake Assembly for 3.5K Axles - RH

Replaces 23-469

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

etrailer mistake
Product did not meet expectations
Wrong item was ordered

2% of customers were not satisfied

etrailer mistake
Product did not meet expectations
Wrong item was ordered

4.9

328 reviews

5 Stars		(290)
4 Stars		(31)
3 Stars		(4)
2 Stars		(2)
1 Star		(1)

by: Jonathan 08/19/2015

Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.

Click to Enlarge

Jonathan One Year Later

8/23/2016

The brakes work great! Im really happy that I took the time to install them.

by: Gary O 03/19/2014

Absolutely the best service on the web. Immediate notification of the order, packing, shipping, and arrival. Got all the parts and they were perfect...just as expected. Watching the eTrailer video also helped a ton on swapping out the bearings and races. Wiil be back at their door for more!!!

Click to Enlarge

by: Steve 11/27/2021

Cleaned and packed my bearings and all 4 brakes on my new to me trailer and did my first trip, 5 days from FL to VA and back, trailer and brakes did great!

Click to Enlarge

by: Donna 01/30/2016

I feel a lot better knowing I have a new and working brake system on my vintage 1973 Shasta travel trailer. Thank you and for the very fast shipping. Arrived sooner than expected.

Click to Enlarge

by: Raymond 03/13/2024 One Year Later

Excellent. Be sure your axle bearing seals are not leaking grease onto the backing plate.

Raymond One Year Later

3/14/2025

Still perfect. As I mentioned, do not pump grease into the axle until fresh grease appears thru the outer bearing. Often the inner seal allows grease onto the brake assembly killing brake function.

Jesse M.

3/14/2025

@Raymond Hey thanks for sharing! Yea a blown seal can be messy, and cleaning grease off the brake pads can be difficult if not impossible. Still, glad to hear your brakes are still working perfectly. Come back anytime you need anything.

by: Jeb 02/26/2014

I purchased 4 of the Nev-R-Just drums for my 1999 enclosed trailer. I had been fighting the elec brakes in that trailer for years, re-wiring the drums and replacing the magnets on some of them. But I just got tired of it and found these had great reviews, are made in the USA and quite reasonably priced. Shipping was super-fast, but I only live a couple of hundred miles from where they shipped.

The worst part of the install was getting the old drums off. I think they used some kind of crushed nut type lock nut on them at the factory as they were HARD to turn the whole way out. And I had soaked them with PB Blaster for a couple of days before hand, as well as using WD40 during the extract. I could only get my impact on 1, maybe 2 nuts per wheel because of interference. I had 4 of the studs break loose from the old drums and just start turning. I had to use my die grinder on the brake shoe side to get the assembly off. Quite a job there.

But the new stuff bolted up nicely. I soldered all the wires, used heat shrink tubing and the split loom tubing on top of that. So a nice, clean install that will hopefully last for years. I've towed the trailer once since the install and the difference is very clear. So nice to have all 4 brakes working well again.

Only gave it 4 out of 5 for two reasons. First is the test of time. I think these will last for years, based on the reviews, but only time can determine that. Second is the lack of includes. I did see from the reviews I needed to order the nuts and lock washers, but missed that I'd need the rubber plugs for the adjuster holes on the back. These have two of those holes per drum where my old ones only had one. So I ended up 4 short and am now searching for them. It would be nice if they added $2-3 per wheel and just included that stuff.

Steve S.

5/14/2014

I agree.. why would we not need nuts,washers n plugs... thought that was not right to leave out..spent more time acquiring nuts than doing the installation...cheap...

Bill

7/29/2015

First time maintaining my Hallmark trailer besides greasing bearing. EASY,FAST to just replace drums and hubs. These kits are the BOMB!!!!!

by: Robert K. 06/10/2019

The brake pads we received from etrailer.com were EXACTLY what we were looking for. The installation was simple and went very well. Nice product. My trailer is 20 years old and these brakes did the job. Also, we went from standard brakes to self-adjusting so no maintenance is necessary. We can now go camping!

The staff at etrailer (Katie G) were so helpful. We were desperate for the product and she made sure we got the brakes within 3 days. Amazing! Thank you so much. We will definitely use etrailer.com again.

Robert K. One Year Later

6/11/2020

Great!

Robert K. One Year Later

6/11/2020

Great!

by: James R 07/09/2015

Brake assemblies were easier than replacing components and cost effective. Add self adjusters as a bonus. Installation was quick and easy. Packing for shipping could have been better.

James R. One Year Later

7/29/2016

I do not use my trailer very often but the brakes are working fine.

by: gary g 05/10/2014

The brakes were a perfect fit. I'm changing over from hydraulic surge brakes to these electric brakes and so far I am impressed.

Gary G. One Year Later

5/10/2015

The brakes still function properly and I am very satisfied with them.

by: Tyler 06/21/2025

Perfect fit, quick shipping and as alway, an expert to talk to while ordering parts you’re not sure of.

by: terra trek trailers 06/16/2017 One Year Later

Heads up!!
ordered 4 sets of hub, drums and brakes over two years ago for a project I've been slowly working on. when I received the items, I noticed the packaging was damaged and reported it to etrailer. 2 years later, I finally went to use the items and discovered the bearings, caps and races had been damaged. I notified the management at etrailer and within a week had complete replacements.
What company in this day and age is willing to stand behind a damage claim two years on? Truly remarkable customer service and willingness to go the extra mile.
etrailer, You've won me forever as a devoted and satisfied customer. you guys are rock stars! Thank You.

by: Tom S. 02/18/2015

US produced, but like any parts, watch out for slivers and sharp edges. Nice to find an assembled fresh unit for the price of the normal rebuild parts, and with the BONUS of self adjustment! Application of lubricant to adjuster threads and thrust surfaces will help insure longer reliability. Quick friendly service with excellent focus on customer satisfaction. Thank you!

Tom S. One Year Later

2/18/2016

Brakes self adjust well

by: Mike M. 12/08/2014

I purchased a left and right brake assy and installed them as per videos and instructions. After towing for 50 miles one side is fine but on the other side both shoes have cracked. I will now have to replace them.

Mike M.

12/10/2014

A follow-up. Within a day of etrailer hearing of my problem, they initiated contact and are replacing the brake assy under warranty. I would have to give them six stars for their customer service and professionalism. Once again the left side was fine so it was probably just a fluke as Dexter parts are usually perfect. I have bought from etrailer.com many times in the past and will continue to do so.

by: Rick 06/02/2020

My 2012 travel trailer came equipped with 1-3/4” wide brakes, which is not a common size. When it was time to do maintenance I went to etrailer.com because of the wealth of information and advice available. After reading the information it became obvious that the best course of action would be to upgrade to 10 x 2-1/4” brakes and hubs. My supplies arrived in good shape, with the Dexter boxes inside of other boxes from etrailer. After watching helpful videos I installed the new brakes in a day. Things went smoothly, installing new complete brake sets is so much easier than messing around with individual parts, and probably about the same cost. Now came time to wear in the brakes and check things out. Beware that it is really tempting to not wait long enough for the brakes to cool in between evolutions where you apply them hard and go from 40 to 20 MPH. They can get pretty hot. The end result is that now we have much more braking power, the braking is smoother, and we have confidence in our ability to stop which is priceless. Not having to adjust our brakes is a plus. We are very pleased with our Dexter never adjust brakes and especially pleased with the exceptional customer service and expert advice from etrailer. Add in the price guarantee and dealing with them is truly a no-brainer.

by: Robert B 02/22/2017

Generally speaking the product seems like a good buy. I looked at the different options at Etrailer and decided on the Dexter units even though they were slightly higher - made in USA. My package of parts arrived 3 days after ordering - a good deal considering the freight cost was $0. One of the brake assemblies had the self adjuster knocked halfway of in spite of the stiff spring hold it together to the shoes. I suspect this happened during shipment and due to bulk packing the 4 assemblies in a box. I would suggest that Etrailer warn their customers to look at their parts carefully upon receipt. I also was concerned about one of the 7/16" mounting studs being knocked out. I found the stud in the carton and reset it into the backing plate and did not have any issues in the installation.

All in all the process went well from ordering to installation. I appreciated all of the helpful videos on line that helped with the ordering process and gave me a heads up on making sure to order nuts, washers and plugs for the adjusting ports.

I would have given the review a 5 except for the packaging which could stand a little improvement.

by: Brian 06/02/2017 One Year Later

I have been using these brakes for one year, about 3000 miles.

Very happy with the quality and price. These are the OEM Dexter brakes for the 3500 lb axle. These were very easy to install and were an exact fit. Nice feature is the auto adjust when the trailer is backing up. No more lifting the axle and climbing underneath to make sure breaks are properly adjusted.

by: Jose Garcia 12/15/2012

my order, so I called e-trailer. There customer service was A+. Delivery was prompt. Installation was a breeze referencing installation video. Note: Be sure to buy the nuts as I thought I could buy at Lowes or home depot, autozone, napa. Nothing! I had to go to a local nuts and bolts store. It's easier to just buy the nuts when you order the brakes. I have not towed my trailer yet, but will write another review when I go camping. I purchased the brakes based on customer reviews. Thanks E-trailer.

by: 23-469 07/30/2013

I mounted these brakes on my 18 foot car hauler after I foolishly purchased the trailer with no brakes. These were very easy to install. After reading other reviews, I ordered the nuts, washers and dust caps at the same time. That saved a lot of time during the installation process. I also ordered the accompanying hub assembly. Everything fit together perfectly and was very easy to install. By doing the installation myself and ordering from etrailer.com I saved a bundle in labor costs and I got free shipping. Not that I needed it for this particular job but their installation videos are very helpful as well. Overall great site, fast shipping and excellent customer service.

by: Aurelio E 09/22/2014

My experience was incredible. I couldn't believe how fast the parts were delivered.

Click to Enlarge

by: Ray 02/21/2017 One Year Later

These brake assemblies are great , fit my trailer perfectly. Once adjusted per directions you never have to adjust again. Easy install. Would recommend these to anyone who wants to improve there trailers braking system. Fast free shipping excellent service. Thank you e trailer.
Ray

by: DKlompy 03/23/2015

After coming home from the hunting trip last year I noticed that one of my brake hubs were getting hot. So I started looking on line for all new electric brakes. After looking through a few different web sites I came across ( etrailer.com ) they had everything I needed to replace the brakes on both axles. The web page was easy to find what I needed and the prices were great. I do think it would even be better if the nuts and adjustor slot plugs were included with the brake assembles. Than you wouldn't forget to order them separately. Checkout was fast and easy and I had them in 3 days. It took about 1 1/2 hours to install both sets of brakes. Great product, and I will buy from them again.

by: Dale S 09/08/2015

Overall, these brakes were not too difficult to install. I read all the reviews beforehand - so knew to order the accessories that don't come with it (including replacement nuts, lockwashers, and adjuster plugs). I also ordered the Deka heat shrink butt connectors and they worked well. I decided to repack the bearings and the only thing I missed was the replacement "race" for the inside of the wheel (you destroy the old one upon removal.). I have not driven the trailer yet - but tested the brakes with wheels raised and it seems to run fine.

by: Alan S 06/07/2016 One Year Later

Installed easily and works well. Have about 5000 miles on the brakes. When ordering, make sure the spindle and flange measurements match the brake parts. My 2200 pound axles had flanges and spindles of a 3500 pound axle, so the 7 inch brakes I initially ordered per the application information did not fit.

by: Bill B. 05/22/2013

My trailer came from the factory with 3500 lb Dexter axles. For some reason it had Haynes brakes and hubs. These Dexter brakes are a seamless replacement and work just fine with the existing hubs. Took 30 minutes per hub to remove, clean, and replace. Be sure to use new seals and then don't use the easy lube feature ever again. Unless, of course, you like working on your camper, then feel free, grease away....
These were on my doorstep within 24 hours by the way.
Thanks etrailer!!!

by: Jon G. 02/08/2017

Received all the parts to rebuild my travel trailer brakes in a short time. Everything from lug nuts, heat shrink splices, drums, bearings, seals, brake backing plates with complete brake assemblies. All in two boxes, albeit two heavy boxes... Total rebuild time from bare axles to tires on and torqued, about 2.5-3 hours. Everything I needed was there. Thanks to Sam G. for the great customer service.

328

true

Show More Reviews

See what our Experts say about this Dexter Accessories and Parts

Do you have a question about this Accessories and Part?

Replacement Hubs and Brake Assemblies for 2006 Haulmark Thrifty Hauler
Since we know you have a Dexter 3,500 lb axle on your trailer the Hub part # AKHD-545-35-EZ-K is going to fit and work well for you. I would go ahead and replace all of the hub drums now unless you are on a super tight budget. Having everything new on the trailer will give you added peace of mind. The self adjusting brake assemblies part # 23-469 would be correct for the right hand side and then part # 23-468 for the left hand side would be correct as well. These components and the other...
view full answer...
If Trailer Hub Gets Burned Up Does Axle Need to be Replaced
Hey John, I would say that is is really likely the spindle is damaged to point of needing replacing but you may as well pull the hub off and check to be sure. It could just be the bearings and hub that are damaged but you never know. Also you can just replace the spindles of an axle but they need to be welded on by someone with the correct jigs for the job. If you get me the axle capacity I can let you know what spindles you might need.
view full answer...
Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
view full answer...
How to Know When Trailer Brake Magnets are Worn Out and Need Replacing
Are there any visible signs of wear on the magnets like exposed windings then that would indicate they need replacing. Magnets can go bad without showing visible signs of wear though. To see how to troubleshoot them check out the help article I attached. For replacement magnets for the Dexter 10 by 2-1/4 inch assemblies you would want the part # BP01-110. As bad as your assemblies sound you might just want to replace both assemblies. For the left hand side you would want the part # AKEBRK-35L-SA...
view full answer...
Troubleshooting Removing Trailer Brake Assemblies and the Studs Just Spin
Your old assemblies could possibly have nuts on the inside of them for the studs to attach to. You are going to need to access the other side of the assembly to see what holds the studs to them. If it is a broken stud without a bolt head to grab onto and the stud is basically just spinning with the nut on the other side you would either need to try and prevent the stud from spinning with like a set of vice-grips or worst possible scenario grind the studs off from the back of the assembly...
view full answer...
Recommended Trailer Brakes for 2006 Bigfoot 21 FT Travel Trailer
From the research that I have done it looks like a 21 ft Bigfoot is going to weigh about 4000 lbs so I am going to assume that it has 4400 lb axles. Since there is a very good chance that it has the 10 inch x 2-1/4 inch brake assemblies, you could use the Dexter Nev-R-Adjust Electric Brake Assemblies, # K23-478-00 for left hand and # K23-479-00 for right hand. Unfortunately a collective OEM trailer parts catalog does not exist, so the best way to determine what parts you will need is...
view full answer...
Replacement Hub/Drum and Brake Assemblies for Dexter Hub/Drum 8-249
Hey Damon, so for the replacement hub and drum you'd want the part # 84556UC3 and then for a matching set of left and right brake assemblies that are self adjusting you'd want the part # 23-468-469. The hub is a 3,500 lb trailer axle hub and has the 5 on 5 inch bolt pattern you need as well. For just a left hand assembly you'd want the part # 23-468 or the right hand side part # 23-469.
view full answer...
Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
If you already have brake drums you will not have to replace them unless they are damaged or became overheated and have discoloration on the inside armature surface where the magnet rides, grooves in the armature surface, or severe wear where the pads ride. If the drums are in good shape there really isn't a benefit to getting new ones when you replace the brakes. Speaking of the brakes if you are looking for 10 x 2-1/4 inch assemblies I recommend our brand # AKEBRK-35L-SA for the left...
view full answer...
How to Determine if Trailer Has Self-Adjusting Brake Assemblies
If your current brake assemblies are self-adjusting, once the hub/drum is removed you will be able to see the adjuster cable extending across the brake assembly as shown in the photo I have edited for you. If you find you do not have them, you can certainly replace your existing brake assemblies. You will need to initially adjust the brake assemblies, but after that they will be self adjusting. I have linked you to a video showing how to adjust brake assemblies, click the link and fast...
view full answer...
Will 10 x 2-1/4 Inch Trailer Brake Shoe Pads Part BP04-095 Fit 10-Inch Nev-R Adjust Brake Assembly
Thanks for sending us a picture! The 10 x 2-1/4 inch trailer brake shoe pads part # BP04-095 you referenced only works with the manual adjust brake assembly. What you need is the left hand shoe lining # K71-681 and/or right hand shoe lining # K71-682 to fit the Dexter 10-inch Nev-R adjust brake assemblies. What I recommend instead of buying the replacement shoe liners, is replacing the entire brake assembly with part # 23-469 (right hand) or # 23-468 (left hand). The reason is because...
view full answer...
Parts Needed to Add Electric Drum Brakes to 6 x 12 Single-Axle Trailer
Adding electric drum brakes to your single-axle trailer requires a few components, including brake flanges, brakes, hub/drums, wiring, a breakaway kit and a brake controller. Each of these is detailed in the linked article which covers the entire process. Brake flanges must be welded on perfectly straight and concentric or you can have trailer tracking problems, premature tire wear or other issues. Specialized jigs are required. Since you have welding experience as long as you have the...
view full answer...
Can Self-Adjusting and Manual Adjusting Braking Assemblies Be Mixed
It is not advised to mix self-adjusting and manual adjusting braking assemblies on the same axle. It is also not advised to use self-adjusting braking assemblies on one axle and manual adjusting braking assemblies on the other. The result of doing so would be uneven braking pressure which would result in control issues as well as safety concerns. If you have a 3,500 lb axle or multiple 3,500 lb axles on your trailer then you will need to use the Dexter Nev-R-Adjust Electric Trailer Brake...
view full answer...
Is the Timbren Axle-Less Suspension System 2000 lbs Compatible with Electric Brakes
You can use electric brakes with a Timbren Axle-Less Suspension System rated for 2,000 lbs, however, you would need the Heavy-Duty system, part # ASR2KHDS01. The Timbren Axle-Less suspension system, # A20RS545, that you referenced is not compatible with trailer brakes because it does not have a brake mounting flange at the base of the spindle. The Timbren Heavy-Duty system, comes with a brake mounting flange with a 4 on 4 bolt pattern which fits most 10 inch brake assemblies. The brake...
view full answer...
Do Electric Trailer Brake Assemblies Make Noise When Activated
When trailer drum brakes are activated you should be able to hear a humming sound. I am not quite sure I would describe it as musical, but it sounds like they are functioning on your trailer. Have you tried testing the brakes to see if they function properly? Most likely they will work fine. You should also note that these are self-adjusting brake assemblies so at first they may not seem to powerful, but with every brake application they should get slightly stronger until they are fully...
view full answer...
Initial Adjustment of Dexter Nev-R-Adjust Electric Drum Brakes
Dexter 10-Inch Nev-R-Adjust electric drum brakes # 23-468 and # 23-469 have a star wheel for initial adjustment, just like regular brakes do, but with these self-adjusting brakes you'll mount them and install your wheel/tire and then rotate the tire so that the internal mechanism can sense the pad tension and self-adjust accordingly. You do not want to set the tension high beforehand as the brake will not be able to release that tension. Please refer to the linked video that explains the...
view full answer...
Can 3500 lb AL KO Brake Assemblies be Replaced with Dexter Brake Assemblies
Yes, the Dexter Nev-R-Adjust brakes will work with your 3,500 lb AL-KO axles. Brake assemblies attach to the brake mounting flange that is welded to the axle or spindle. The brake mounting flange on the 3,500 lb AL-KO axles uses a standard 4-bolt pattern that is compatible with AL-KO 3,500 lb brake assemblies and Dexter brake assemblies. For the left hand brake assembly, you can use part # 23-468 and for the right hand use part # 23-469. I have attached a review video for the Nev-R-Adjust...
view full answer...
Replacement Brakes For 2000 Coleman Utah Pop-Up Camper
You did not say whether you have electric or hydraulic brakes on your 2000 Coleman Utah camper. You will need to know a few details when choosing replacement brake assemblies. There should be a plate or sticker on the axle with the weight rating. You will need both the left and right brakes that match the brakes you currently have. You will need to know the diameter and width of the brakes, and the mounting bolt pattern. I have attached a link to the 10-inch brakes you can check out. We...
view full answer...
Replacing Hydraulic Surge Trailer Brakes with Electric Drum Brakes
Dexter 10 x 2-1/4-inch electric drum brakes # 23-468 and # 23-469 are a perfect choice for your 3500-lb axle that has a 4-bolt brake flange. We see more and more boat trailer manufacturers specifying electric drum brakes as standard equipment due to their lower cost and easier installation. Electric brakes require a compatible brake controller like the Prodigy P2 # 90885. To choose new hub/drum assemblies you'll need to know the bearings used in your existing hubs; this will ensure new...
view full answer...
Self-Adjusting Electric Trailer Brakes to Replace Dexter 10x2-1/4" 36-19 Brake Assemblies
We do have self-adjusting electric trailer brakes that will fit in place of your manual adjust 10 x 2-1/4 brakes. You can use our house brand, # AKEBRK-35R-SA for the right and # AKEBRK-35L-SA for the left. If you want the Dexter brand then use # 23-469 for the right and # 23-468 for the left. I have linked some video reviews of these brakes for you.
view full answer...
Does it Matter which Wire is Ground and Which is Power on Dexter Nev-R-Adjust Trailer Brakes
On brake assembly # 23-468, and most electric brake assemblies, it does not matter which wire is used for ground and which is used for power. So they are not polarity sensitive and you can use either wire for either function. I have linked a few videos on this brake assembly for you. The matching right hand side assembly is # 23-469.
view full answer...
10 inch Trailer Brake Assembly Recommendation for a 1969 Kit Companion Travel Trailer
Do the 10 inch brake assemblies on your trailer attach with 4 mounting studs? If so, then you have standard 10 inch brake assemblies and the part # 23-468 for the left side and part # 23-469 for the right hand side would fit your trailer.
view full answer...
Hub and Drum and Brake Assemblies Rated for 3,500 lbs
We have exactly what you need, so long as your current hub uses an # L68149 inner bearing and # L44649 outer bearing, which you will be able to tell when you remove your current hub assembly as the bearing numbers should be printed on the bearing themselves. If that is the case the exact parts you need are: - Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 OR, if you have an E-Z Lube axle: - etrailer Trailer Hub and Drum Assembly for 3,500-lb...
view full answer...
Do Trailer Brake Assemblies on Both Axles Need to be Replaced at the Same Time
Trailer brake assemblies will typically all wear at the same rate. This means that when you find assemblies that are worn and in need of replacement, most likely the remaining assemblies on the trailer will require replacement too. With that being said, it is not required to replace the brake assemblies on both of your axles at the same time. If you check the condition of all of them and only the ones you mentioned are worn, then you can leave the assemblies on the other axle alone for...
view full answer...
How to Disengage Electric Boat Trailer Brakes for Backing Up Trailer with 2011 Mercedes-Benz ML-350
If your boat trailer uses electric brakes such as # 23-469 it is a good idea to unplug the trailer connector from the ML-350 before you back the trailer up to launch your boat. Boat trailers are more and more often being fitted with electric brakes since they are less expensive than hydraulic brakes, but just the same electricity and water are not the best of friends. You can also simply unplug your trailer brake controller or turn its power setting down to zero when you need to back up...
view full answer...

< Previous

12 3. . .4

Next >

Do you have a question about this Accessories and Part?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Robert G

Expert Research:

Michael H

Expert Research:

Jeff D

Expert Research:

Reno H

Expert Research:

Jameson C

Expert Research:

John H

Expert Research:

Adam R

Video Edited:

Zack K

Video Edited:

Kathleen M

Video Edited:

Chris R

Updated by:

Lindsey S

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Alexander C

Installed by:

Robert C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.