Does it Matter which Wire is Ground and Which is Power on Dexter Nev-R-Adjust Trailer Brakes
Updated 12/29/2015 | Published 12/28/2015
Products Featured in This Question
Question:
Are the wires polarity sensitive?
asked by: Kevin J
0
Expert Reply:
On brake assembly # 23-468, and most electric brake assemblies, it does not matter which wire is used for ground and which is used for power. So they are not polarity sensitive and you can use either wire for either function. I have linked a few videos on this brake assembly for you. The matching right hand side assembly is # 23-469.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Q&A: What Ohms Should Trailer Brake Magnets Be?
- Q&A: Replacement 2" Coupler for a Ram CT8003 Coupler
- Q&A: Trailer Hitch for 1998 Ford E-450 Shuttle Bus Conversion
- Q&A: Replacement 072-099-00 Leaf Spring and a Broken Spring Hanger
- Q&A: What is the Latch on the Demco Channel Tongue Trailer Coupler Made Of?
- Q&A: Can Lippert ABS 12" Brakes And Hubs Be Used On Equipment Hauler Trailer With Standard 12" Brakes 7K?
- Article: Spring Towing Readiness Checklist
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs