Is the Timbren Axle-Less Suspension System 2000 lbs Compatible with Electric Brakes
Updated 12/18/2013 | Published 12/17/2013
Products Featured in This Question
Question:
Iwant electric brakes with a timbren 2000lb Axle less trailer suspension is this possible
asked by: Phil P
Helpful Expert Reply:
You can use electric brakes with a Timbren Axle-Less Suspension System rated for 2,000 lbs, however, you would need the Heavy-Duty system, part # ASR2KHDS01. The Timbren Axle-Less suspension system, # A20RS545, that you referenced is not compatible with trailer brakes because it does not have a brake mounting flange at the base of the spindle.
The Timbren Heavy-Duty system, comes with a brake mounting flange with a 4 on 4 bolt pattern which fits most 10 inch brake assemblies. The brake assemblies I recommend are the Dexter Nev-R-Adjust 10 Inch Brake Assemblies, # 23-468 and # 23-469. This system does not include hubs, so you will want to pick up 2 of the etrailer Hub and Drum Assembly, # AKHD-545-35-EZ-K. This hub and drum assembly has a 5 on 4-1/2 inch bolt pattern and includes the inner and outer bearings, grease seal, grease cap and lug nuts. It also fits the EZ Lube spindles that come with the Timbren system.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer axles
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Shop: Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: How To Measure Wet Bolts And Suspension Components On Tandem Axle RV
- Q&A: What Inner and Outer Bearings Does 3,500 lb Axle Disc Brake Kit Use
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Measurement of Hole Spacing on Torflex Lift Kit # K71-725-02
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Lighting Requirements
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height