To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These aero-style aluminum crossbars are built to stay steady when you’re moving down the highway with gear on top. At 50" long, 2-3/4" wide, and 1-1/8" tall, they give you a solid base for hauling up to 165 lbs—whether that’s kayaks, cargo boxes, or camping gear. The streamlined shape helps cut down wind resistance and vibration so your setup feels secure and balanced mile after mile.
No one wants a loud roof rack humming over every stretch of road. The rubber strips in the top channels push down as you install your accessories, then close back up around the hardware. That means no trimming and far less wind noise or whistling. It’s a clean, aerodynamic setup that makes long drives quieter and more enjoyable.
You can use both channel-mount and clamp-around accessories on these bars, so you’re free to attach most universal cargo, water, snow, and bike carriers. Whether you’re bringing paddleboards for the weekend or skis for winter trips, this rack system adapts easily to different gear setups without extra hassle or special mounts.
Security matters when your gear’s sitting out in plain sight. The SkyLine towers are compatible with Yakima Same Key System lock cores (sold separately), giving you a way to deter theft by locking down the rack itself. It’s an easy upgrade that adds peace of mind when you park at trailheads or make overnight stops.
With its durable aluminum build and silver finish, this system is made to handle the elements while keeping weight low. The Yakima SkyLine Roof Rack comes with a limited lifetime warranty so you can keep using it trip after trip without worrying about corrosion or wear over time.
Alternate Instructions
Ratings & Reviews
The crossbars are light and very strong. They fit perfectly and installed easily.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
Yakima racks are always a good choice. Etrailer made it easy for me to know all the parts I needed and it was so easy to install!
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe
Good condition quality. Good and detailed instructions but aittle tedious install.
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
Awesome experience and product! It shipped fast and was easy to install using the directions and a recommended video. Plus, it looks super hot attached to my white Honda Accord Coupe 2016. (I leave it on all year round.) Love it and etrailer!!
I love the ease of removing my crossbars at the end of the season with these landing pads. Highly recommend these.
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
Exactly what we needed to use our old Yakima bars and kayak sharks with our new Ford Explorer. Our old car, a Ford Expedition, used the same round Yakima bars and kayak sharks but had a different roof rack. Instead of paying $800+ to get a whole new kayak rack system... the adapters we got from etrailer helped us used all the old equipment :)
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
I had cross bars and landing pads on my Jeep Grand Cherokee. I bought these to put on my wife’s new Grand Cherokee L. They were extremely easy to install and now I can easily move the roof rails between the two vehicles. They are a great product as is most of Yakima’s products. I highly recommend them.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
Came quickly, and I appreciate the free shipping – which is why I went with etrailer instead of ordering directly from Yakima.
I have these installed on a 2022 Honda Pilot. I could not get them to fit on my raised roof rails with the included rubber gaskets. I have mounted them without the gasket but this leaves a gap between the rail and the landing pad. This seems secure but does not have a finished look. I will be trying to see how to get the gaskets to fit.
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
Makes for easy and secure crossbar on/off. Covers stay on during car washes.
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
Easy website, fast shipping, quality pr oducts
My 2014 Jeep Grand Cherokee used landing pads 18 to mount to the roof my newer 2023 JGC uses landing pad 19. I was able to change the pads thanks to etrailer and install my older roof rack on my newer Jeep. I love that the majority of my roof rack is upgrade-able.
These landing pads allow for the quickest and easiest install and removal of cross bars. This will be the only ones I use going forward.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
8/24/2025
The rack base has worked perfectly. I took my Yakima rack off my Tacoma and transferred it to a Honda Pilot and eTrailer had the correct bracket.