See what our Experts say about this Rhino Rack Roof Rack

• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
  The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
  view full answer...
  
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
  The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
  view full answer...
• Affordable Way To Carry A Kayak On A 2010 Hyundai Sonata
  I have an affordable solution for you, however, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2 # RB1375B-2 is not a fit for your 2010 Hyundai Sonata and even if it was, you would need to also buy a few other parts to fit it onto a vehicle so it would not be the price you were looking at. For your vehicle with a naked roof, the SportRack Semi-Custom Roof Rack 50" # SR1002 is going to be your best option. This square bar roof rack includes everything necessary...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Roof Rack for 2009 Jeep Wrangler Unlimited With Aftermarket Hard Top to Transport 2 Kayaks
  The roof racks that we offer for the 2009 Jeep Wrangler Unlimited, such as the Rhino-Rack System consisting of parts # RB1375B-2, # RLT500 and # RTC95JW, are intended for use on the OEM hardtop. This system when mounted on the factory hardtop has a maximum cargo weight capacity of 65-lbs. This limit is not a function of the rack materials, but rather the capacity of the OEM roof, and therefore is the same for all other roof racks we offer for your Wrangler. Without knowing the brand and...
  view full answer...
• Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-Max
  I believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
  view full answer...
• Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
  The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
  view full answer...
• Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
  I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
  view full answer...
• Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked Roof
  In order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
  view full answer...
• Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150
  Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
  view full answer...
• 2013 Pathfinder Naked Roof Roof Rack Recommendation
  For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep Wrangler
  The Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Kayak Carrier Recommendation for 2009 Ford F-150 With Factory Folding Tonneau Cover
  A ladder rack is one option for transporting your kayak on your F-150 that has the dealer-installed folding tonneau cover, but note there can sometimes be interference between the common mounting requirements for tonneau covers and ladder racks since both install on the bed rails. I can offer you a simple and very cost-effective option IF your tonneau cover can handle the weight of your kayak. We offer foam block carriers that are very inexpensive, simple to install and that weigh very...
  view full answer...
• Rhino-Rack Roof Rack Compatibility for 2019 Toyota Tacoma
  Your 2019 Toyota Tacoma Rhino-Rack system consists of: -Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 -Rhino-Rack 2500 Series Legs # RRRLKVA -Custom DK Fit Kit # DK174 The 2008 Nissan Frontier system consists of the same crossbars and legs, so you will just need to get the new fit kit # DK174.
  view full answer...
• Crossbar Length And Fit Kit For A 2022 Toyota Tacoma Access Cab
  We recommend a 54" crossbar for the Rhino Rack Roof Rack on a 2022 Toyota Tacoma Access Cab with a naked roof. For a single 54" Vortex Bar we have part # RRVA137B You will need the # DK174 fit kit. I am sorry to say that we do not offer this kit as a half kit, so you would get enough for two crossbars.
  view full answer...
• Can Thule Cargo Box Fit Rhino-Rack Roof Rack on 2017 Toyota Tacoma Double Cab With Naked Roof
  Yes, you can absolutely mount a Thule rooftop cargo box to the Rhino-Rack Roof Rack that fits your 2017 Toyota Tacoma Double Cab with a naked roof. The parts you need are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK174 This rack has aerodynamic 3-1/8" wide x 1-3/16" tall crossbars and Thule cargo boxes like the Thule Pulse # TH615, Thule Force XT # TH6358B, and Thule Motion XT Rooftop Cargo Box # TH629706...
  view full answer...
  
• Rhino Rack Roof Rack Recommendation for 2015 Toyota Tacoma 4-Door
  For your 2015 Toyota Tacoma 4 door we have a Rhino Rack roof rack that fits that is a custom fit rack that will not require any drilling into the roof of the vehicle. For that you'd want the part numbers # RRVA137B-2, # RRRLKVA, and # DK174 which grabs the roof of the vehicle by the door opening. I attached an install video of this rack on a 2015 Tacoma 4 door just like yours for you to check out.
  view full answer...
  
• Recommended No-Drill Roof Rack for a 2022 Toyota Tacoma Access Cab
  The Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2, part # RRRLKVA, and part # DK174 is what I recommend for a 2022 Toyota Tacoma Access Cab. This is a great system with aero crossbars that reduce wind drag/noise, uses clips that clamp onto the door jambs for a no-drill install, and have integrated crossbar channels for use with channel mounted accessories. This is a complete kit that has everything you need to start hauling gear on the roof.
  view full answer...
• Best Economically Priced Roof Rack that Fits 2015 Toyota Tacoma Double Cab
  For your 2015 Toyota Tacoma double cab the Rhino Rack square bar rack part # RRVA137B-2, # RRRLKVA and # DK174 is a really great rack that's a higher quality rack but also great priced. It is our lowest priced option as well.
  view full answer...
• Should 1 or 2 Crossbars be Used to Haul Long Kayak on 2022 Toyota Tacoma
  Since your 2022 Toyota Tacoma has a smaller bed and you're wanting to carry a longer canoe I encourage you to use a 2-bar roof rack system. For this I recommend the Rhino-Rack Vortex system which includes the following: 54" Vortex Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK174 To keep your canoe safe from scratches on the Malone Axis Truck Bed and Roof Load Extender # MPG907 I recommend using a foam block like part # MPG159 and then using something like the Rhino-Rack...
  view full answer...
• Is Drilling Required for a Roof Rack On a 2019 Toyota Tacoma with Bare Roof
  The Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2, part # RRRLKVA, and part # DK174 is a confirmed fit for a 2019 Toyota Tacoma (All Models Including TRD) and will not require any drilling. This is one of the best bang for your buck roof racks on the market and what I recommend you use. It also comes with locks for security. The Rhino-Rack Roof Rack System with Tracks part # Y02-490B that you are looking at does require drilling and although can be installed on a roof, this...
  view full answer...
  
• 2020 Toyota Tacoma Access Cab Attaching One Rhino Roof Rack Bar To Roof
  There is a one crossbar fit for the roof of your 2020 Toyota Tacoma with a naked roof. You will in fact need a Rhino Rack with a fit kit. The 2020 Toyota Tacoma Roof Rack by Rhino Rack will fit your vehicle. This rack consists of Rhino-Rack Vortex Aero Crossbar - Black - 54" Long - Qty 1, part # RB1375B, the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 2, part # RRRLKVAH , and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof...
  view full answer...
• Mounting the Rhino-Rack Batwing Awning to a 2013 Toyota Tacoma
  The Rhino-Rack Batwing Awning, # RR33200 is designed to bolt to a Rhino-Rack Pioneer platform or crossbars with top channels, using hardware sold separately. For your 2013 Toyota Tacoma, you will need the Batwing and Foxwing Awning Relocation Kit for Rhino-Rack Heavy-Duty Crossbars, # RR31102 and note that this awning is only compatible with crossbars that extend past the roof rack's legs. I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54", # RB1375B-2 with the Rhino-Rack...
  view full answer...
• Recommended Roof Rack For 2016 Toyota Tacoma Double Cab
  For your 2016 Toyota Tacoma Double Cab, I have a confirmed fit for you. I recommend the Rhino Rack roof rack for your application. This rack consists of the Aluminum Aero Crossbars # RRVA137B-2 that have the channels for mounting accessories as well as rubber strips to reduce wind noise. There are theft detering plasic locks included, but they can be upgraded to all metal locks # RRVA-LEC4 if you so choose. These bars are used with Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars...
  view full answer...
• Options For Carrying 2 Kayaks On The Roof Of A 2013 Toyota Tacoma
  I have a solution for you, but there are not any ladder racks for your 2013 Toyota Tacoma Double Cab with 6' bed that can be used with a toneau bed cover. If you would like to remove your tonneau cover then you could use T-Rac Pro2 Ladder Rack # TH37004XT. This is a really nice ladder rack that has an impressive weight capacity of 1,000lbs. The two crossbars have built-in channels which allow many accessories to be mounted. If you would like to keep your bed cover then your only option...
  view full answer...
• What is Included in the Rhino-Rack 2500 Roof Rack # DS1375B?
  The Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 54" Long DS1375B comes with the 54-inch long square crossbars and the mounting towers that are compatible with your 2006 Toyota Tacoma (double cab). It also comes with a special tool that is used to install the bolts. In order to have a complete crossbar system, you need the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK174. If you need a walkthrough of the installation, I went...
  view full answer...
• What Bike Rack do You Recommend for My 2021 Toyota Tacoma with a Folding Tonneau Cover?
  From the sounds of your question, it seems like you are looking for a truck-bed mounted bike rack. However, with your permanent third panel near your truck's cab, this will most likely interfere with your Trek 7200's tire with a bed solution like the Thule Insta-Gater Pro Truck Bed Bike Rack # TH93VR. With that being said, a great alternative is to use a roof rack system with a roof-mounted bike rack for your 2021 Toyota Tacoma. Whether you have an Access cab or a Double cab, I recommend...
  view full answer...
• Does Rhino Rack and Thule Make a Roof Rack that Fits 2009 Toyota Tacoma Double Cab
  For your 2009 Toyota Tacoma double cab Rhino Rack does have roof racks that fit well like the Vortex Aero roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK174 but this rack attaches to the door frame of your truck and not the channels on top of it. Or if you wanted a similar Thule rack we also have the part # TH711400, # TH710501, and # TH145107 as a fit as well.
  view full answer...
• Recommended Rhino-Rack System to Carry Luggage Bag on 2019 Toyota Tacoma Double Cab Roof
  To install a Rhino-Rack system on your 2019 Toyota Tacoma Double Cab naked roof you need a clamp system that uses the following parts: - 54" Vortex Aero Crossbars # RRVA137B-2 - 2500 Series Legs # RRRLKVA - DK Fit Kit # DK174 If you'd rather have the Pioneer Platform Rack then your best bet is part # RR26QX instead. This does require drilling but it just has the ditch mounts so the drilling is minimal compared to the other Rhino-Rack mounting options. The thing I really like about...
  view full answer...
• Is there a Roof Rack that Fits Naked Roof on a 2009 Double Cab Toyota Tacoma
  Yes, the Rhino Rack kit with parts # RRVA137B-2, # RRRLKVA,and # DK174 are a fit and would work great on your 2009 Toyota Tacoma. The Aero bars are aerodynamic and cause less wind resistance so noise is kept to a minimum. Included are video resources with additional information for your review.
  view full answer...
• Ladder Rack and Tonneau Cover That Fit 2020 Toyota Tacoma 6 ft Bed
  I have a solution that will allow your 2020 Toyota Tacoma 6 foot bed to have both a tonneau and a ladder rack installed at the same time but it will require a new tonneau as the folding tonneaus don't allow a way to fit a ladder rack with them since they go over the bed rails. So for a tonneau you'd want the RetraxONE XR part # RTT-60852 which has tracks designed for a ladder rack and then you can then install the Yakima OverHaul HD Adjustable Truck Rack w/ Retrax XR Tonneau Cover Adapter...
  view full answer...
• Recommended Roof Rack And Hitch Mounted Goalpost For 2013 Toyota Tacoma To Carry Ladders
  We should be able to come up with a solution that will work for your 2013 Toyota Tacoma. The roof rack you choose will depend on the style roof you have. If you have a naked roof with no existing rails or crossbars, I recommend the Rhino-Rack 2500 Series Roof Rack. This features 54 inch aero crossbars and custom clamps and pads. To order this system you need parts # RRVA137B-2, # RRRLKVA, and # DK174. The weight capacity for this rack is 165 lbs. If you have siderails that run front...
  view full answer...
• Single Bar Rhino-Rack Roof Rack to Fit 2015 Toyota Tacoma Double Cab with a Naked Roof
  If your 2015 Toyota Tacoma has a double cab and a naked roof the Rhino-Rack Vortex roof rack to fit consists of: 54 inch Vortex Crossbars # RRVA137B-2 2500 Series Legs # RRRLKVA Fit Kit # DK174 For a half system that will install one crossbar on your truck use: # RRVA137B # RRRLKVAH # DK174H
  view full answer...
• Recommended Roof Rack for 2016 Toyota Tacoma 4 door
  We have a couple of roof racks that are a confirmed fit for your 2016 Toyota Tacoma, but Yakima does not offer a fit for their Q-Towers on your vehicle. The Rhino-Rack Roof Rack for your 2016 is a very sturdy rack with channeled crossbars and an aerodynamic bar to reduce the wind noise. This rack consists of the Rhino-Rack Vortex Aero Crossbars in 54 inch length # RRVA137B-2, Rhino-Rack 2500 Series Legs # RRRLKVA, and Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked...
  view full answer...
• Recommended Roof Rack and Ladder Rack for 2017 Toyota Tacoma with Access Cab
  For your 2017 Toyota Tacoma with access cab, there is not a gutter mount roof rack system confirmed to fit. I recommend the Rhino-Rack system that utilizes the door frame clips custom fit to your truck to resist scratching or damaging your vehicle. This kit consists of: Rhino-Rack Vortex Aero Crossbars - 54" Long # RRVA137B-2 Rhino-Rack 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK174 If you really don't want these clips there is an alternative in the SeaSucker Monkey Bars Roof Rack...
  view full answer...
• Recommendation of Roof Rack for Cab and Camper Shell on a 2022 Toyota Tacoma
  Yes, we have the perfect set-up for your 2022 Toyota Tacoma with a shell. Use the Rhino-Rack Aero Bar Roof Rack for Camper Shells, # Y02-490B along with Rhino-Rack Vortex Aero Crossbars, # RRVA137B-2 and mounted with the Rhino-Rack 2500 Series Legs, # RRRLKVA and Custom DK Fit Kit # DK174.
  view full answer...
• Is Rhino Rack for 2013 Toyota Tacoma Same Quality as Thule and Yakima
  If it were me I would go with the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK174 for your 2013 Toyota Tacoma Double Cab with a naked roof. We have installed all of the major brand roof racks and we have found that the Rhino Rack stuff is right at the same level as the Yakima and Thule stuff in terms of quality but at a better price. The Thule and Yakima stuff are very nice and they are some of the nicest quality stuff around, but for anyone who is at all price sensitive but...
  view full answer...

Do you have a question about this Roof Rack?