See what our Experts say about this Yakima Accessories and Parts

• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Recommended Roof Rack for a 2024 Hyundai Palisade w/out Rails
  We do have a set up that will attach to your 2024 Hyundai Palisade even though you do not have roof rails. This roof rack has a 165 lbs capacity and it does not extend past the mounting legs. It is the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Carrying 19 Foot Canoe on Yakima Overhaul HD Ladder Rack on 2021 Toyota Tacoma
  It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and works perfectly on the Tacoma. The version that mounts to the utility tracks # Y01151-5868 has a maximum crossbar spread of 40". You can see that measurement around the 3:20 minute mark in the video I attached below. For the version that installs onto tonneau...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Roof Rack and Extended Crossbars to Mount Two Hullavators on a 2020 Hyundai Palisade
  Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item # TH898. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138 Yakima JetStream Crossbar - Aluminum...
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• Recommended Roof Rack for a 2021 Hyundai Palisade
  It does not. I checked with Thule and they list a Thule WingBar Edge Crossbar item # TH29RE and a Edge Flush Rail Feet item # TH89SC as parts fitting a 2021 Hyundai Palisade with side rails. You would need the Thule 186008 to install this system and I can not find that part outside of Thule's website where it is unavailable for purchase. I have listed two comparable Yakima options below. These are similar roof racks for your 2021 Hyundai Palisade. They do not overhand the side of your...
  view full answer...
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...
• Roof Rack Recommendation for Carrying Kayak on a 2014 Nissan Juke
  First you'll need a roof rack on your 2014 Nissan Juke. For this I suggest the Yakima system that consists of: 50 inch CoreBars - # Y00421 BaseLine Towers - # Y28TR Fit Kits - # Y06145 and # Y06138 Then to carry the kayak the Thule DockGrip # TH895. The DockGrip holds your kayak using saddles and also includes the bow and stern tie-downs you'll need. To make it easier to connect the tie-downs use the Thule Quick Loops # TH530.
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• How do I Install a Set of Yakima Cross Bars onto a 2017 Toyota Tacoma Access Cab?
  In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces: BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y28TR RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536 2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145 Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation. I've included a video of this installation so you can...
  view full answer...
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Lowest Profile Roof Rack For 2021 Hyundai Palisade
  It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars # Y00425 The Ridgeline Towers # Y00145 and the ridgeclip # Y89FR. This leaves about an inch or so from where your sunroof is when it's open. If you have a naked roof, you can get these crossbars # Y00426, baseline towers # Y28TR and these two baseclip kits # Y06145 and # Y06138. This will be just above your sunroof when...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting Points
  If you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
  view full answer...
• Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double Cab
  I can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
  view full answer...
• Roof Rack And Canoe Carrier For A 2020 Hyundai Palisade With A Naked Roof
  For your 2020 Hyundai Palisade, we do have a couple of options for a roof rack. The first option you can use is the Yakima JetStream Crossbars # Y00426 with the towers # Y28TR, and the fit kit # Y06145 & # Y06138. These cross bars are rated for 165lbs, and measure 60" long. These cross bars are aerodynamic, have a t-track channel for roof mounted accessories, and will provide a quiet, low-profile option that will work great with your Palisade. The other option you can choose from is...
  view full answer...
• Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Palisade With No Rails or Crossbars
  Although we don't offer a roof rack option that would provide the side rails, we do offer roof rack options that would work for your 2020 Hyundai Palisade. For a Yakima round bar roof rack, you'd need the following parts: • Yakima 58 inch round crossbars, part # Y00409 • Yakima BaseLine Towers, part # Y28TR • Yakima SL Adapters, part # Y03536 • Yakima Base Clips # Y06145 • Yakima Base Clips # Y06138 You might want to consider going with an aero-style crossbar, however. The round bars...
  view full answer...

Do you have a question about this Accessories and Part?