See what our Experts say about this Rhino Rack Roof Rack

• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Roof Rack Recommendation for a 2007 Chevy Trailblazer for Carrying Ladders
  I would recommend going with the Rhino Rack HD crossbar roof rack as it will have plenty of strength for your ladders. You would need the part numbers # RB1250B-2, # RLTP-2, and # RRVA-FK2-2 which have been confirmed as a fit for your 2007 Chevy Trailblazer raised side rails.. For load stops for the ladders you would then want the part # RRRLH. For 10 foot cinch straps you could also use the part # RTD3. Be sure not to exceed the roof weight capacity of your vehicle.
  view full answer...
• Will Yakima SkyBox 21 Fit on Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The max dimensions for a crossbar that the Yakima SkyBox 21 # Y07337 can accommodate is 3-1/2" x 1-11/16". The Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250B-2 are a little too tall for that so if you want to stick with Rhino-Rack you need the Vortex crossbars like part # RRVA137B-2. If you let me know the year/make/model of your vehicle I can make a roof rack recommendation for you. The Rhino-Rack HD bars are much taller than typical crossbars so none of the Yakima boxes will work,...
  view full answer...
• Roof Weight Capacity of 2005 Toyota Highlander Fitted with Rhino-Rack Heavy Duty Roof Rack
  The Rhino-Rack Heavy Duty Roof Rack for your 2005 Toyota Highlander, which consists of parts # RB1250B-2 and # CXB, does carry a 200-lb weight rating. Your vehicle itself will also have a roof weight capacity that could be more, the same or less. Your manual's indicated weight limit of 100-lbs could be for an OEM roof rack, or it could be for the overall roof structure itself. If Toyota says the roof itself can handle 100-lbs and no more, then you will have to abide by that lower rating....
  view full answer...
• What Setup Do I Need to Install a Rhino-Rack Pioneer Platform Rack on My 2005 Porsche Cayenne?
  I have a solution for you. Unfortunately, the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" Wide # RR42115BF does require crossbars, but it is not compatible with HD crossbars. With that being said, we do carry the Rhino Rack Aero Crossbars # RRVA126B-2 that have a maximum weight capacity of 175 - pounds when mounted on your 2005 Porsche Cayenne. This is the exact weight rating as the Rhino-Rack HD bars # RB1250B-2. For a compatible roof rack with...
  view full answer...
• Recommended Roof Rack And Ladder Mounting Kit For 2016 Nissan Versa Note
  The roof rack I recommend for your 2016 Versa Note is the Rhino-Rack Heavy-Duty Roof Rack. This roof rack has 50-inch long crossbars that have a rubber strip in the crossbar channel to help cushion any items you carry on the roof rack. The roof rack has a 165-lb weight capacity. To order this roof rack you will need part # RB1250B-2, part # RRRLKHD, and part # DK382. to make it easier to secure the ladder on your roof rack I recommend part # REGLK2B. This kit fits the C-channels on...
  view full answer...
• Will the Rhino-Rack HD Crossbars Allow Me to Transport 2 Kayaks on My 2014 Kia Sorrento LX?
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 # RB1250B-2 (black) and # RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will need the following parts: - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK179 For a J-style carrier...
  view full answer...
• Recommended Roof Rack for 2000 Honda CR-V
  Ladder racks are only for trucks, so your 2000 Honda CRV will instead utilize a roof rack. I recommend the Rhino Rack roof rack consisting of the following that are confirmed to fit your vehicle: Vortex Aero Crossbars - Aluminum - Black - 46" Long # RRVA118B-2 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK053 This rack is rated for 110 lb capacity maximum. I recommend also using the metal lock cores # RRVA-LEC4 for security when utilizing the top channels of the bars. If you want...
  view full answer...
• Roof Rack Recommendation for 2010 Toyota Corolla with Naked Roof for Snowboard Carrier
  For your 2010 Toyota Corolla sedan with a naked roof we have the 2010 Toyota Corolla Roof Rack by Rhino Rack which includes part numbers # RB1250B-2, # RRRLKHD and # DK152 as a confirmed fit which would work great for a snowboard rack like the Rhino Rack # RR574 which can carry up to 4 pairs of skis or 2 boards.
  view full answer...
• Roof Rack to Carry Ladders on a 2001 Ford Escape
  Your 2001 Ford Escape could have 1 of 3 possible roof configurations. I will provide recommendations for each type. Since you are using the rack to carry ladders it doesn't have to be a fancy rack so I will provide good economical options. First, if your Escape does not have any rails or bars at all on the roof the most quality option is going to be a Rhino-Rack using the following parts: Vortex Crossbars # RRVA126B-2 Feet # RRRLKVA Fit kit # DK099 If your Escape has factory tracks,...
  view full answer...
• Do Rhino-Rack Roof Rack Tracks Fit 2015 Chevy Equinox
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW will fit your 2015 Chevy Equinox; they are a universal fit so you just need to mount the tracks to your roof and add the correct feet and crossbars. Here is what you will need for an entire rack system: - Rhino-Rack RTC-Style Roof Rack Tracks # RTC8JW - Track Mount RLTP Legs # RLTP - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250B-2
  view full answer...
• Roof Rack for 2013 Mazda 3 Five Door to Carry a Rowing Shell
  The most cost effective and aerodynamic (thus quiet) roof rack would be a Rhino Rack system, that would consist of the following: 44 inch Silver Vortex Aero Crossbars # RRVA118S-2 (also available in black as # RRVA118B-2) Leg Kit # RRRLKVA Vehicle Specific Fit Kit for vehicles with fixed roof mounted attachment points, # DK289 The rack would be easily removable when needed. Rather than resting your rowing shell directly on the crossbars, I'd recommend using a foam block system like the...
  view full answer...
• Does Rhino Rack HD Roof Rack Fit 2011 BMW X3 with Naked Roof and Sunroof
  The Rhino Rack HD part numbers # RB1250B-2, # RRRLKHD, and # DK295 is a confirmed fit for your 2011 BMW X3 with a naked roof and would not interfere with the sunroof. You aren't going to want to open the sunroof with this rack installed though as it will make quite a bit of noise. If you keep the roof clean as well as the mounting pads of the feet there would not be any long term damage done to the vehicle.
  view full answer...
• Bike Rack Options on a 2009 Porsche Cayenne?
  There is a confirmed fit for a trailer hitch on your 2009 Porsche Cayenne, so long as it does not have a rear-mounted spare tire. The Curt Trailer Hitch Receiver, # 13220, is a two-inch hitch with a class III rating, which will be more than adequate for the use of a bike rack. I have included a link to a video install of this hitch. If you are looking for a bike rack to attach to your hitch, I recommend the Kuat NV 2.0 2-Bike Platform Rack, # NV22G. This is a platform-style rack which...
  view full answer...
• Rhino Rack Roof Rack Fits for 2015 Infiniti Q40
  Rhino Rack's online fitguide isn't always up to date. We know for certain that the Rhino Rack part # RR47SR that you referenced and the # RB1250B-2, # RRRLKHD, and # DK211 is a confirmed fit.
  view full answer...
• Using Rhino Rack 50 Inch Crossbars on 2011 Honda Accord
  You can certainly use 50 inch load bars on your Accord. Rhino Rack offers a Heavy Duty rack system that uses 50 inch load bars. You can assemble a system by using the following parts: Heavy Duty 50 Inch Crossbars, part # RB1250B-2 Leg Kit, part # RRRLKHD Vehicle Specific Clamp Kit, part # DK184 The rack has a 110 lb capacity, which might be limited by the capacity of your Accord's roof if it is less.
  view full answer...
• Can I Use My Existing Rhino-Rack Crossbars From Gutter Mounted Leg With SX Series Legs
  If your existing Rhino-Rack crossbars are the 49" Vortex Aero Crossbars, part # RRVA126B-2, all you will need is the Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4, part # RRSX100. If your roof rack has the Rhino-Rack Heavy-Duty Roof Rack Crossbars Black - 50" Long - Qty 2, part # RB1250B-2, you will need to add the aforementioned Vortex Aero Crossbars to the SX Series Legs to complete your roof rack. I have included product description links and...
  view full answer...
• Rhino-Rack Heavy Duty Roof Rack for 2018 Volkswagen Passat
  The Rhino-Rack # Y01-140B-NT is designed to fit roof mounted tracks such as what would be found on a camper shell, it's not typically used on a vehicle roof. You can install a similar rack using the following parts: • Rhino-Rack Heavy Duty 50 inch crossbars, part # RB1250B-2 for black or # RB1250 for silver • Series 2500 Legs, part # RRRLKHD • Vehicle-Specific fit clips, part # DK323 This rack has a 165 lb capacity and is custom designed to fit your vehicle.
  view full answer...
• Mounting a Thule Cargo Carrier on 2017 Chevy Colorado
  I wish there was a great solution that would allow you to install a ladder rack with your tonneau cover but the only ladder racks we offer that can fit with your tonneau would have a load bar spread that would be too wide. What about a roof rack for the cargo carrier?
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Best Roof Rack Option For 2015 Toyota Sienna With Naked Roof
  Hello Chris, thanks for getting in touch. The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 can absolutely be installed on a 2011-2020 Sienna with the naked roof. I was not actually aware that naked roof was an option for those years of the Sienna, but if yours does have the naked roof, a track system like the # RRRTV168 is the only option for adding a roof rack. just keep in mind you will be drilling into the roof. You can use the track with the Rhino-Rack Quick Mount Legs # RRRLT600,...
  view full answer...
• What Is The Narrowest Roof Track?
  Hi David, I checked the 5 styles of tracks we carry and it looks like the Rhino Rack options will be the most narrow at 1-1/2". In case you were curious about the other style (and brands), I have all my findings listed below. 1-1/2" wide - Rhino-Rack RT-Style Roof Rack Tracks - 66" Long # RRRTV168 1-5/8" wide - Thule Top Tracks for Roof Racks - 60" Long # THTB60 2" wide - Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y74MR 1-5/8" wide - Yakima 60" Tracks for Roof...
  view full answer...
• Rhino-Rack Rivet Mounted Roof Rack for 2020 Winnebago View 24V
  You can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such a long roof, you can pick the length that works for you: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long # RRRTS534 - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long # RTS502 - Rhino-Rack RT-Style Roof Rack...
  view full answer...
  
• Potential Roof Rack Option For 2006 Roadtrek 170
  Certainly nothing that is any type of custom fit but you might be able to use something that mounts to tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168. Then you'd need the right crossbar length to go with Legs # RRRLT600H. I'm not sure what your roof measures so I've added a link below to our selection of tracks and you can filter through them by size.
  view full answer...
• Roof Rack Recommendation for 2019 Honda Odyssey with Naked Roof
  We have great roof rack options for your 2019 Honda Odyssey that has a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, # RRRLT600. This rack attaches to the door sills of your vehicle. What I really like about the Rhino Rack roof racks is that they offer the same quality as the more expensive racks but the price is better. It also comes with locks at the lower price instead of requiring additional parts as an add on as well.
  view full answer...
• Dimensions and Leg Compatibility of Rhino-Rack RT-Style Roof Rack Tracks RRRTV168
  Rhino-Rack tracks # RRRTV168 are 66-1/8" long x 1-1/2" wide x 1/2" tall. Yes, they are compatible with the RLT600 legs # RRRLT600. They are also compatible with Rhino-Rack RLTP, RLTF, and RLT500 legs.
  view full answer...
• Best Way to Haul my Kayak with my 2014 Honda Odyssey with a Naked Roof
  I have a solution but with your van as the doors slide they would interfere with the straps running through the track area the doors slide in. Instead it will require a roof rack system to attach the Malone Rack Pads for Crossbars part # MPG314 to allow the kayak to rest on. This rack consist of the parts: # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600 Not only will this allow you to attach pads but a ton of different roof top accessories for different hobbies. I also recommend thinking...
  view full answer...
• Installation of Rhino-Rack Roof Rack Tracks on 2003 VW Eurovan MV with Rivets
  The Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 # RRRTV168 are not designed to be mounted in the rain channels, but rather close to them. You still want rain to move away from your doors and not settle in areas you've drilled holes, so the actual gutter is not ideal. However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion...
  view full answer...
  
• Roof Rack Recommendation for 2015 Honda Odyssey EX-L
  We have roof racks that will fit your 2015 Honda Odyssey with a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600.
  view full answer...
  
• Does Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 Have to Install with Rivets
  I would recommend you use rivets to install the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 that come with it as they'll be flush enough that accessories will still slide in the tracks. If you find a flush enough bolt to fit you certainly could still go that route.
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Which Track Mount Legs Should I Use With The RT-Style Roof Rack Tracks On My 2018 Toyota Tundra?
  I've found the correct leg mounts you're looking for! If you're planning on getting the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 they will install on your 2018 Toyota Tundra's roof rivets and the Rhino-Rack Quick Mount Legs # RRRLT600 are the legs you need. They will fit the RT Style Roof Tracks and are designed specifically for the Vortex Aero Crossbars # RRVA165S-2. Here is the black version # RRVA165B-2, same thing just different color. If you are wanting the bars to be about...
  view full answer...
  
• How to Use Roof Top Tent on Truck Bed with Tonneau Cover Installed
  If the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
  view full answer...
• Can 66 Inch Rhino-Rack RT-Style Roof Rack Tracks be Cut to Fit
  Yes, you can cut to fit the length you need of the 66 inch rivet mount Rhino-Rack tracks, which are the following part number: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168
  view full answer...
• Recommended Roof Rack for a 2020 Honda Odyssey w/ a Naked Roof
  Yes, you can get a roof rack set up to carry some duffle bags on your 2020 Odyssey's roof. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 10 mm Thick - Qty 2 item # RRQMVA10 Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 item # RRRTV168 Rhino-Rack Quick Mount Legs for Vortex...
  view full answer...
• Recommended Roof Rack For 2019 Honda Odyssey With Naked Roof
  In order to mount your Thule Cargo Box on the nakef roof of your 2019 Honda Odyssey you will need a crossbar setup. The best crossbar setup for your vehicle is the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. This is a 49" long low-profile crossbar with a weight capacity of 165lbs. With this crossbar you will also need Legs # RRRLT600, Leg Spacers # RRQMVA10, and Roof Tracks # RRRTV168. Drilling is required, but it is still a fairly simple installation process. I have included a detailed...
  view full answer...
• 2016 Honda Odyssey Roof Rack That Doesnt Require Permanent Mount
  We don't have any fit kits for the door jambs of your 2016 Honda Odyssey from any of our manufacturers. You could add a Rhino-roof rack using parts: # RRVA126B-2, # RRQMVA10, # RRRTV168, # RRRLT600. I am sure this is more than you are looking for. Another easy option for you is the SeaSucker Monkey Bars # 298-SX6000B. These are extremely easy to install and are strong enough for highway speeds and rated for 165 lbs. It utilizes vacuum cups rated for 210 lbs pull strength each.
  view full answer...
• Size of Rivets Included with Rhino-Rack RT-Style Roof Rack Tracks
  I reached out to my contact at Rhino-Rack and he said the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 include 1.6mm - 6.3mm rivets. You will use a 5mm drill bit to make the holes that they install inside.
  view full answer...
• Roof Rack Track System for a 2014 Ford F-150 with Tonneau Cover
  I do have what you need to add a roof rack track system to your bed rails above the tonneau cover but the Rhino-Rack Roof Rack System part # Y02-500B will not work for you because the crossbars are not long enough to span the width of your truck bed and the tracks are not made for a metal bedside. Generally speaking, the maximum width between the tracks will be about 3" shorter than the overall length of the crossbar. The distance from the bottom of the track to the bottom of the crossbar...
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Recommended Truck Bed Crossbar Kit for a 2024 GMC Sierra 1500
  Tony, the only way I understand you'd be able to use your Rhino-Rack bars # RR63ZE with your 2024 GMC Sierra is by installing a tonneau cover with T-slots so you can then use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600. If you didn't want to also install a tonneau cover, then your only other option would be a new system in which you could use the Yakima BedRock HD Truck Bed Rack # Y01160-59, which would not require a tonneau cover, simply just clamps onto your...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack Tracks & Basket That is Heavy Duty
  Hi Morris, While there isn't anything specific to your 2022 Roxor, there are rivet-mounted tracks you can add. I'm not sure the length you need, but the shortest available is the 36-1/4" long Rhino-Rack RT-Style Roof Rack Tracks # RRRTS540. Then you'd need a roof rack that fits the tracks, and for that you would add the Rhino-Rack Quick Mount Legs # RRRLT600. To complete the rack set up you'd need crossbars, with the right length depending on the width of your roof/cab enclosure. You...
  view full answer...
• Recommended Tonneau Cover and Bike Rack for a 2024 Ford Ranger
  Hey John, welcome back and thanks for the email! I was able to track down all of the parts in the pictures you provided and find the same model tonneau cover that fits your 2024 Ford Ranger XLT with a 5' bed. I have listed all of the parts below: Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black item # PE94NJ Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Rhino-Rack Vortex Aero Crossbars...
  view full answer...

Do you have a question about this Roof Rack?