See what our Experts say about this Inno Roof Rack

• Recommended Roof Rack And Cargo Box For 2020 Ford Explorer ST With Factory Roof Rails
  The Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 with Inno Flush Feet # INXS100 that you mentioned are confirmed to fit the roof of your 2020 Ford Explorer ST with factory raised rails running front to back. These crossbars meet the requirements for the Yakima CBX Rooftop Cargo Box - 18 Cubic Ft - Black # Y86FR so it will be a nice setup for you. The cargo box will simply clamp around the crossbars with the included clamps. This is a very nice box which has an integrated...
  view full answer...
• Roof Rack for 2022 Chevy Traverse with Naked Roof
  For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• Using a Yakima SkyBox 16 on a 2013 Ford Explorer
  I have a solution for you, but the Yakima Skybox NX 16, part # Y95AV won't fit the factory crossbars on the 2013 Ford Explorer. The factory bars are too far apart when installed, and a little too wide to use safely with the Skybox NX 16. You'll want to go aftermarket and pick a rack that is quickly removed when not in use (And secure when it is) so you can remove them and avoid the "Double crossbar" look on the vehicle. I recommend Inno's FlushBar system, consisting of: Flush Bar Foot...
  view full answer...
• What Roof Rack Works with My 2004 Honda Accord Sedan to Use the Inno Locker # INXA445?
  I have a great crossbar solution for you to use the Inno Locker # INXA445! For your 2004 Honda Accord 4-door with a naked roof, the Inno Locker will attaches as long as you have aero crossbars that have top channels that extend the length of the crossbar. For 100% definite compatibility with the Inner Locker on your roof, I recommend the following crossbar setup: - Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 - Inno Through Feet for Aero Crossbars - Naked Roofs # INXS250 -...
  view full answer...
• Roof Rack And Tent Combo For 2000 Honda CR-V
  If you're wanting to get the Inno roof rack system on your 2000 Honda CR-V, you will need the Inno Aero Crossbars # INXB123-2, Inno Through Feet # INXS250 and the custom Fit Kit # INK146. These have a dynamic weight capacity of 165 lbs. This Yakima SkyRise Tent # Y07437 requires a minimum of 165 lbs of dynamic weight capacity. Dynamic is the weight in motion and static is the weight when sitting still. So you will be good to put a Yakima tent on top.
  view full answer...
• Will Inno Gravity Ski and Snowboard Carrier with Channel Mount fit a 2014 Subaru Forester?
  The Inno Gravity Ski and Snowboard Carrier will fit on your 2014 Subaru Forester if you have aftermarket crossbars. The OEM crossbars did not have the top channel so if you have those bars I recommend the Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 6 Fat Skis or 4 Boards # INA951 for a similar rack. If you don't already have crossbars, I recommend the following options that will be compatible with the Inno Gravity carrier: If you have the factory side rails that run...
  view full answer...
  
• What Kayak Rack will Work with My Tonneau Cover on My 2022 Ford Maverick?
  I have a great kayak carrier solution for you that works with your trifold tonneau cover. Unfortunately, I confirmed with our ladder rack manufacturers that we currently do not have a fitment of a ladder rack that will allow you to simultaneously install the rack with the cover installed. However, we do have a great roof rack option that allows you to transport your kayaks on the roof of your 2022 Ford Maverick to allow you to have a fully-functional tonneau cover. For that route, I recommend...
  view full answer...
• Recommended Roof Rack Crossbar Options for 2017 Chevy Equinox With Factory Roof Side Rails
  We can't have the family going hungry! Yakima and Thule do make a high quality product, but they do get every penny for it. Another brand name you might not be so familiar with is Inno. They are very well known on the west coast, but not necessarily in the rest of the country. Inno offers high quality roof roof rack components at a lower price than their main competitors. I'd recommend the Inno Aero Crossbar system, which would consist of the following parts: Inno Aero Crossbars, in black...
  view full answer...
• Best Roof Rack for 2006 Range Rover HSE
  A great all around roof rack for your 2006 Range Rover HSE with no overhang is the Inno Aero Roof Rack system with part numbers # INXB123-2, # INXS200, # INK263. I recommend this over the other roof racks that fit your vehicle because this system uses 48" crossbars # INXB123-2 compared to the other longer 60" crossbars. If you need more space, then get a roof rack with longer bars, but if your priority is a low-profile and sleek look, then the Inno Rack is ideal. The Inno Aero Crossbars...
  view full answer...
• Will the Inno Feet # INXS150 Work with my Inno Aero Crossbars # INXB123-2 on My Honda Pilot?
  Yes, the Inno Through Feet for Aero Crossbars # INXS150 will work with the Inno Aero Crossbars - Aluminum - Black - 48" Long - Qty 2 # INXB123-2 on your 2008 Honda Pilot.
  view full answer...
• Measuring the Front and Rear Bar Stay Dimensions for Inno Roof Rack on 2009 Scion xB
  I have the exact measurements to fit the Inno Roof Rack with part numbers # INXB153-2 (or # INXB123-2), # INXS250 ( or # INXS200), and # INK300 on your 2009 Scion xB. It sounds like the confusion comes from how there are different install instructions for the different parts and they must be used simultaneously. What will help you out here is the install guide for your fit kit # INK300. These are the clamps and pads that were designed specifically for your 2009 Scion xB. What you're looking...
  view full answer...
• DK Fit Kit for Rhino-Rack 2500 Series Legs on a 2004 Toyota Matrix
  The correct fit kit for installing the Rhino-Rack 2500 Series Legs # RRRLKVA (for crossbars like # RRVA126B-2) to your 2004 Toyota Matrix is part DK062. This has been discontinued though so if you aren't able to find it somewhere like on a marketplace then I recommend going with the Inno roof rack instead since it's similar to Rhino-Rack both in price and in quality. Here are the parts you'll need for your Matrix: - 48" Crossbars # INXB123-2 - Through Feet # INXS250 - Fit Kit # INK501
  view full answer...
• Will the SportRack Vista Cargo Basket Mount to Inno Aero Crossbars
  The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit the Inno Aero Crossbars # INXB123-2 (you will also need the Inno Flush Feet for Aero Crossbars # INXS100 to mount these to your 2021 Ford Explorer). The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit crossbars up to 3-1/2" wide and the Inno Aero Crossbars # INXB123-2 are 3-1/8" wide, so you are good to go.
  view full answer...
• Tent Rooftop Rack For 2015 Scion xB
  Rhino Rack does not make a Pioneer Platform for the 2015 Scion xB. Yakima makes a similar 55" long x 49" wide platform, but the weight limit is 165 pounds, well under your needs. It also requires a fit kit that is not compatible with the Scion roof. Further, you will need to check your owners manual for your vehicles roof weight limit. I suspect it is below well below 165 as well. The only similar thing we offer is the Inno Roof Rack that supports 120 pounds – the most of all the Scion...
  view full answer...
• What Roof Rack Fits Both My 2011 Volkswagen Jetta and My 2007 Toyota Matrix?
  I have a great solution for you. While we don't have a complete interchangeable roof rack that fits both your 2011 Volkswagen Jetta (bare roof) and your 2007 Toyota Matrix (bare roof), we do have a system that can use the exact same crossbars and mounting feet. The only difference between the two sets of roof racks are the fit kit that connects the feet to the roof of the vehicles. The difference parts are needed because fit kits are designed for specifically to fit the contours of roofs...
  view full answer...
• Inno Roof Rack Recommendation for 2016 Honda HR-V with Factory Flush Rails
  For your 2016 Honda HR-V with factory flush rails the Inno fit kit part # INTR159 can be used but you need to use the Inno roof rack components part numbers # INXS450 and # INXB123-2. This will attach through the factory fixed mounting points of your roof and does not clamp around the door frame. It can't be used with Honda brand crossbars.
  view full answer...
• Confirmed Roof Rack Fits for 2012 Infiniti QX56 with Raised Roof Side Rails
  We have already done the work for you! If you click on the page link provided you will see all aftermarket roof rack products confirmed for your 2012 Infiniti QX56 that has raised roof side rails that run front-to-back. These various roof racks have crossbar lengths that vary considerably, from 48-inches as with the Inno Aero rack made of parts # INXB123-2 and # INXS100, up to 65-inches as with the Malone Universal Rack # MPG203. The choice depends on your budget, preferred appearance...
  view full answer...
• Roof Rack Recommendation for 2000 Honda Civic Sedan
  We have roof racks that are a fit for your 2000 Honda Civic sedan but Sportrack does not have any fits for the sedan models of your vehicle. Also worth mentioning is that the Sportrack roof racks don't generally fit well so we try not to recommend them since they are only a semi-custom fit and not a full custom fit. Instead the Inno roof rack part # INXB123-2, # INXS250, # INK707 would be your best option. This the best priced option that fits your vehicle, it's a custom fit rack so it...
  view full answer...
• Inno Roof Rack that Is Guaranteed to fit 2008 Mazda RX-8 Roof
  Inno test fit their roof rack part numbers # INXB123-2, # INXS250, and # INK163 on a 2008 Mazda RX-8 just like yours and they determined it fit well. While we haven't had the chance to test the fit we can guarantee it will fit your vehicle and work great! I attached a link to this page for our return policy but you wouldn't need to worry.
  view full answer...
• Inno Roof Rack Fit for a 2020 Infiniti QX80
  The Inno Roof Rack consisting of the # INXB123-2 48 inch crossbars and the # INXS100 flush roof rack feet would be a fine choice for your 2020 Infiniti QX80, and is a confirmed fit per Inno. The Inno Aero Crossbars measure 3-1/8 inch wide by 1-1/8 inch tall and the Rhino-Rack # RMCB is compatible with crossbars up to 3-1/2 inches in width and 1-1/2 inches tall, so they'll work just find together. I've linked to a demonstration video showing the features of the Inno Aero flush roof rack.
  view full answer...
• Roof Rack for a 2014 Mini Countryman S R60 to Use Clamp on and Channel Mounted Accessories
  I can definitely help you out in finding the best roof rack option for your 2014 Mini Countryman S R60. Any of the below options will allow you to use your Inno box and Yakima bike/kayak accessories. 2014 Mini Countryman Roof Rack by Inno - Inno Aero Crossbars # INXB123-2 - Inno Through Feet for Aero Crossbars # INXS450 - Custom Fit Kit for Inno # INTR142 2014 Mini Countryman Roof Rack by Thule - Thule WingBar Edge Crossbars # TH96FE - Edge Flush Rail Feet for Thule Edge Crossbars #...
  view full answer...
• Roof Rack Confirmed to Fit a 2010 Ford Explorer with Raised Factory Side Rails
  The Thule AeroBlade Edge Roof Rack 7501B is not a confirmed fit for your 2010 Ford Explorer. For a compatible roof rack on your 2010 Ford Explorer with raised rails, you can use the 2010 Ford Explorer Roof Rack by Inno which consists of the: - Inno Aero Crossbars # INXB123-2 - Inno Through Feet for Aero Crossbars # INXS150
  view full answer...
• Does Inno Through Bar Roof Rack for 2020 Toyota RAV4 with Raised Rails Come with End Caps
  Yes the bars part # INXB123-2 do come with end caps that you'll use with the feet part # INXS150 on the roof of your 2020 Toyota RAV4 with raised side rails.
  view full answer...
• Lowest Profile Roof Rack for a 2016 Audi A6 Sedan
  The lowest profile roof rack for a 2016 Audi A6 Sedan is the Inno Aero Crossbar System part # INXB100-108, part # INXS200, and part # INK412. This system sits about 3-1/2" to 4" from the roof to the top of the crossbar but it is hard to get exact measurements due to all the different roof shapes. I have attached a photo of the Inno Aero Crossbar System installed on a different vehicle that way you can get a better feel for how tall it is.
  view full answer...
  
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMax
  We can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
  view full answer...
• Can Leg on Rola Roof Rack be Replaced for 2006 Honda Civic
  We do have the following parts still listed as replacement parts for a Rola roof rack: Replacement Cage Nuts part # 59710 Replacement Wrenches part 38371 Replacement Rubber Buffer Strips part 59846 (discontinued) Replacement End Support Covers part # 59887 For your application though if that leg is damaged badly then we need to get you a different roof rack. When I reached out to my contact at Rola he said that part has been discontinued so there aren't any replacements for you. If your...
  view full answer...
  
• Recommended Inno Roof Rack For 2013 Honda Civic Coupe Naked Roof
  The custom fit kit part # INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part # INXB130-138 and Inno Through feet part # INXS250. The Inno crossbars are aerodynamic to cut down on wind noise and have integrated T-slots to make mounting accessories easier. The through feet are designed so the bar sits on top of the feet and allows for bar overhang, which comes in handy if you have a water...
  view full answer...
  
• Roof Rack Recommendation For A 2024 Honda CR-V Sport L
  Hello Ken. We do have roof rack options for your 2024 Honda CR-V Sport L. Does your CR-V have the OEM flush mounted rails that run front to back? I ask because we offer roof rack option for both naked roof vehicles as well as vehicles with the OEM flush mounted rails. So, I will go ahead and recommend options for both roof styles: OEM Flush Mounted Rails - Thule WingBar Evo Crossbars # TH711300 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo # TH52KE Naked...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Lincoln MKX
  The roof rack I recommend for your 2018 MKX with a naked roof is the Inno Aero Bar roof rack part numbers # INXB115-2, # INXS200, and # INK676 because this custom fit rack has aero bars which are very quiet, installs very easily, and we know it fits and works well on the MKX as we had the chance to install the rack on one. Check out the linked install video I attached for this rack to see us walk through the install of the rack on a 2015 MKX. Then for a kayak rack I recommend the Yakima...
  view full answer...
  
• Roof Rack Recommendation for 2016 Fiat 500X with Smooth Roof
  There is a great option for a roof rack from Inno, who is also the only manufacturer that makes a rack which fits your 2016 Fiat 500X with a naked roof. This will give your 500X a low-profile, sleek and durable roof rack that can carry all kinds of gear. The rack consists of: - Inno Aero Crossbars # INXB100-108 - Inno Flush Feet # INXS200 - Custom Fit Kit # INK482 As you can see by the accompanying photo of this roof rack on a 2016 Fiat 500X the Inno's crossbars fit the exact width of...
  view full answer...
  
• Where to Install Feet of Inno Roof Rack on a 2014 Toyota Prius v
  I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS200 Fit Kit - # INK870 For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned. For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge. Attached is a snapshot of these specs out of the installation...
  view full answer...
  
• Inno Roof Rack Recommendation for 2008 Toyota Prius
  The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
  view full answer...
  
• Roof Rack for 2022 Chevy Traverse with Naked Roof
  For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
  view full answer...
• What Is The Lowest Profile Roof Rack For A 2023 Mazda CX30 With Factory Flush Rails?
  Removing the factory rails will definitely be the way to go if you want to have the roof rack sit as low as possible. This way the towers can sit directly on the roof, as opposed to sitting on top of the rails. Removing the rails is actually something we recommend fairly frequently for a 2023 Mazda CX30. For you I recommend the Thule WingBar Setup. The towers and crossbars will add only about 4-1/8" of height to your roof. This consists of the following parts; Thule Wingbar 53" # TH711400 Evo...
  view full answer...
• Crossbar Spacing Instructions For The Inno Aero Crossbars On A 2015 Toyota Prius
  The Inno Aero Crossbars # INXB100-108 with the flush feet # INXS200, with the fit kit # INK865 will need to be mounted: -15-3/4" from the gap between the front and rear doors, for the rear, &, -11-3/4" from the gap between the front and rear doors, for the front. I have included a a diagram depicting these measurement for you to check out as well.
  view full answer...
  
• Recommended Roof Rack for a 2015 Honda Civic Coupe
  The Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped crossbars. It also has a very sleek design since the crossbars don't extend past the mounting feet. I have attached a full list of options below.
  view full answer...
• Are there Any Thule Crossbars for My 2013 Honda Crosstour?
  There is not a fit kit for your 2013 Crosstour because Thule does not make a set of bars compatible with your vehicle. Instead, you're limited to using either the SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars # SR1002, or any of the following: -Inno Aero Crossbars # INXB130-138 for a set of 51" and 54" long bars with the custom feet # INXS250, and the fit kit # INK587, -Inno Aero Crossbars # INXB123-130 for a set of 48" and 51" long bars, with the custom feet # INXS250,...
  view full answer...
• Roof Rack Options For 2020 Lexus RX 350 With Panoramic Glass Sunroof
  If your Lexus has flush mounted rails that run back and forth on the roof, I recommend to use the Thule WingBar Evo Aluminum Crossbars part # TH711200 with the feet part # TH710601 and fit kit part # TH186044 for the 2020 Lexus RX350 F sport with panoramic roof. This rack does fit with the panoramic roof however Thule recommends that you do not open the glass roof when the rack is installed because it will damage the roof, the accessories on the rack and create a lot of wind noise. The...
  view full answer...
• Does Inno Roof Rack Fit 2015 Lexus GS 350 Without Doing Any Modifications
  Yep, it absolutely does; I verified for you with the manufacturer that the Inno roof rack does indeed fit a 2015 Lexus GS 350, including your F-Sport model, and you will not have to cut the bars or do any type of modification. For the complete roof rack on your Lexus, you will need the following parts: - Inno Aero Crossbars # INXB108-2 - Inno Flush Feet for Aero Crossbars # INXS200 - Custom Fit Kit # INK418
  view full answer...
• How to Carry Two 65 Lb Kayaks with a 2015 Honda Civic Si
  I looked in the owner's manual for your 2015 Honda Civic Si and was not able to find any reference to what your roof's weight capacity is. Therefore, your best option to determine this would be to contact the dealer with your VIN. Assuming the weight capacity of your roof is rated for the weight of your kayaks/rack/carrier, I recommend using the Inno Roof Rack part # INXB108-115, # INXS200, and # INK642 with two sets of the Swagman Contour Kayak Carrier w/ Tie-Downs - J-Style - Fixed Arms...
  view full answer...
• Lowest Profile Roof Rack for 2022 Mazda CX-5 With Bare Roof
  The lowest-profile roof rack for your 2022 Mazda CX-5 is the flush-mounted Inno rack on your bare roof. The overall height added will be 4 inches give or take a small amount (the curves of the roof will mean this can vary). The flush-mount does not shift the mounting point, however, as the feet have to be positioned at specific points on your CX-5, per the instructions. The parts that make up the Inno rack that fit your '22 CX-5 are the following: - Inno Aero Crossbars # INXB108-115 -...
  view full answer...
• Flush-Mount Roof Rack Options For 2018 Honda Civic
  Since Thule recommends 53" crossbars for your 2018 Honda Civic, you will not want to go shorter. This is because going shorter could be too close to the mounting brackets and that will not provide sufficient room to install the Thule system onto the roof. Luckily, there is a flush-mounted system that will fit your vehicle, but not from Thule. If you have the hatchback then go with Rhino-Rack ROC25 Roof Rack # RR78TR and if you have the sedan then go with Rhino-Rack ROC25 Roof Rack # RR92XR....
  view full answer...
• Thule Flush Mount Roof Rack For 2005 Toyota Prius
  The Thule AeroBlade roof rack has been discontinued and replaced by the WingBar Edge, so there isn't a fit kit for those crossbars for your 2005 Toyota Prius. If you'd like a Thule flush mount roof rack for your '05 Prius you can use the Edge, which consists of Thule WingBar Edge Crossbar - Silver # TH23RE or Black # TH56FE, Edge Clamp Feet # TH79SC, and Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145181. This is a premium option so if you'd like something that is still...
  view full answer...
• Aero-Style Roof Rack for 2018 Lexus RX 350 with No Roof Rails
  We can help you with an aftermarket roof rack for your 2018 Lexus RX 350 that has a bare roof with no sort of rails or fixtures. The current options come from Inno, a prominent maker of OEM roof racks for many import vehicles. Their three rack systems for your RX 350 are shown on the linked page. The first two racks shown use longer cross bars which extend out past the mounting legs to give you the most available cargo space. The last one shown uses shorter bars that terminate in the...
  view full answer...
  
• Why are Roof Rack Crossbars Different Lengths for a 2007 Acura MDX with Naked Roof
  You have to consider the whole system and how the designs are different. Since they are all different the bars won't necessarily be all the same. There are some designs, for example from Inno, that have bars that are even shorter because the way the feet are designed they have to be a certain length. If you want to go with a quality aero bar roof rack the Rhino-Rack is a great choice. You will need the following parts to install it on your 2007 Acura MDX with naked roof: 2500 Roof Rack...
  view full answer...
• Recommended Solution to Carry 4 Bikes on 2017 Mini Cooper 4 Door with Hardtop
  I have a solution for you, but the Curt # C11417 is not a confirmed fit on the 2017 Mini Cooper; it is designed for older models of the Mini Cooper only. The only available hitch confirmed to fit the 2017 Mini Cooper (excluding S and John Cooper Works editions) is the EcoHitch # 306-X7290, which has a 1-1/4" receiver. With that said, this EcoHitch is a Class I hitch with a 150-lbs tongue weight capacity and you cannot carry 4 bikes on a Class I receiver. I'll also note that you would...
  view full answer...
• Roof Rack Recommendation for 2017 Acura MDX with a Naked Roof
  We do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
  view full answer...
• Best Inno Roof Rack For 2017 Acura MDX With Naked Roof
  Hello William, thanks for reaching out. The Inno Roof Rack # IN76WR is the correct fit for the 2017 Acura MDX. It is fine for the roof rack and pad to sit on the rubber molding. This is how it was designed. The tower also rests on the roof and is clamped to the door jamb, so the whole setup is plenty secure and strong. Also, you can indeed use a Thule accessory with this Inno roof rack. The aero crossbars with top channels are a universal design. So you will be able to use virtually any...
  view full answer...

Do you have a question about this Roof Rack?