Inno Dual Angle Ski and Snowboard Carrier - Locking - Fixed Mounting Points - 6 Skis or 4 Boards

Inno Dual Angle Ski and Snowboard Carrier - Locking - Fixed Mounting Points - 6 Skis or 4 Boards

Item # INTX726

lowest price pledge

Retail:$259.99

Our Price: $241.01

You Save: $18.98
Ski and Snowboard Racks

This item qualifies for Free Shipping

Shipping Weight: 20 lbs

Quantity: 
In Stock, Ships Today
Inno Roof Rack - INTX726
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Roof Rack
  • Inno
  • 6 Pairs of Skis
  • 4 Snowboards
  • Fixed Mounting Points
  • Bolt On
  • Ski and Rack Locks
  • Fixed Height
Locking carrier transports 6 skis or 4 snowboards on your vehicle with factory fixed mounting points. Telescoping design lets you load carrier from both sides of vehicle. Carrier tilts up to accommodate tall bindings. Rustproof aluminum construction. Lowest Prices for the best ski and snowboard racks from Inno. Inno Dual Angle Ski and Snowboard Carrier - Locking - Fixed Mounting Points - 6 Skis or 4 Boards part number INTX726 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Q & A (4)
  • Photos
  • Why etrailer?

Inno Ski and Snowboard Racks - INTX726

Locking carrier transports 6 skis or 4 snowboards on your vehicle with factory fixed mounting points. Telescoping design lets you load carrier from both sides of vehicle. Carrier tilts up to accommodate tall bindings. Rustproof aluminum construction.


Features:

  • Roof-mounted carrier transports 6 pairs of skis or 4 snowboards
    • Mounts to your vehicle's factory fixed mounting points with custom fit kit (sold separately)
    • No need for crossbars or base rack system
  • Telescoping dual carriers adjust to fit the width of your roof
    • Load easily from either side of your vehicle
  • Integrated levers let you tilt carriers up to accommodate tall bindings
  • Large push buttons let you easily open carrier even while wearing gloves
  • Soft rubber padding protects your cargo during transport
  • Locking covers secure your gear to the carrier and the carrier to your roof
  • Constructed of durable plastic and rustproof aluminum


Specs:

  • Carrying capacity (per side): 3 pairs of skis or 2 snowboards
  • Maximum thickness of stacked skis or snowboards: 1-5/8"
  • Maximum length between mounting points: 46-3/4"
  • Overall dimensions: 37" wide x 7" long x 5" tall
  • Carrier weight: 20 lbs
  • Limited lifetime warranty


Inno Dual Angle

The Dual Angle lets you transport 6 pairs of skis or 4 snowboards on your vehicle with factory fixed mounting points. It installs with a custom fit kit (sold separately) - no base rack needed. The telescoping dual carrier adjusts to the width of your roof, and it allows for easy loading from both sides of the vehicle. The Dual Angle can be tilted up with integrated levers to accommodate tall bindings. It features large buttons for easy opening, soft padding to protect your gear, and locks to keep your cargo safe.


Telescoping Dual Carriers

Inno Dual Angle diagram

The carrier has telescoping dual cradles that can be adjusted to accommodate the distance between your door jambs. To adjust, simply loosen the bolts on the bottom of the carrier, slide the cradle in or out to achieve the proper width, and tighten the bolts with the included Allen wrench until the spring washers are flattened.


Inno Dual Angle diagram 2

The carrier can accommodate vehicles with up to 46-3/4" of space between the fixed mounting points.

Easy to Open and Load

The Dual Angle cradles are easy to open and load even while wearing gloves. Just unlock the cradles, push the large buttons, and lift the arms.


Inno Dual Angle load

The telescoping cradles are easy to access and load from the driver's and passenger's side of your vehicle. To load, simply slide your skis or snowboards into the cradles with the rear end of the ski or snowboard facing the front of the vehicle. Both bindings should sit between the cradles.


Adjustable for Tall Bindings

You can adjust the carrier angle for easier loading or to accommodate tall bindings. Simply pull the lever and lift the carrier until it clicks into place. To lower, pull out the lever and slowly lower the carrier until you hear the click.


Padding Protects Gear

Soft padding on the insides of the arms gently cradles your cargo. The pads also protect your gear from scratches and scuffs during transport.


Simple Installation

Inno Dual Angle on incline

The Dual Angle is designed to install on a vehicle with factory fixed mounting points. The carrier requires a custom fit kit for installation (sold separately). To install, bolt the plates included in your fit kit to your vehicle's fixed mounting points to provide attachment points for the carrier. Then bolt the carrier to the plates to secure it to the vehicle. The rear carrier should be installed at a distance of 27-5/8" to 39-3/8" from the front carrier.


Rubber seals are included to cover the exposed portions of the channels on the bottoms of the carriers. Trim the seals to the required length, and insert them into the channels to help reduce wind noise.


Safe and Secure

The Dual Angle includes 4 locking covers that secure your equipment to the carrier. The covers also secure the carrier to the vehicle by denying access to the mounting hardware.



TX726 Inno Dual Angle Ski and Snowboard Carrier - Factory Fixed Mounting Points - Locking - 12 Skis or 4 Boards



INTX726 Installation InstructionsInstallation Details INTX726 Installation instructions



0
0

Ask the Experts about this Inno Ski and Snowboard Racks
Do you have a question about this Ski and Snowboard Rack?


  • Inno Dual Angle Ski and Snowboard Carrier and Fit Kit for 2019 Toyota Highlander
  • Inno Dual Angle Ski and Snowboard Carrier # INTX726 is not a fit on your Highlander but their similar model # INUK729 is and will use Fit Kit # INK666 to install on your roof. I checked with my technical contact at Inno who confirmed compatibility with your vehicle and roof type.
    view full answer...

  • Fit of Inno Dual Angle Ski and Snowboard Carrier #TX726 with 2011 Mazda CX-9
  • The Inno Dual Angle Ski and Snowboard Carrier - Locking - Fixed Mounting Points - 6 Skis or 4 Boards # INTX726 is a fit for your 2011 Mazda CX-9. You will simply need to add the Custom Fit Kit # INTR124. I confirmed this fit with my contact at Inno. The Inno carrier for naked roofs has been discontinued, so you will want to stay with the fixed mount option.
    view full answer...

  • Can the Dual Angle Ski and Snowboard Carrier # INTX726 be Used on a 2006 Chevy Cobalt
  • To install the Inno Dual Angle Ski and Snowboard Carrier # INTX726 on any vehicle you would just need the fit kit that Inno created as a fit for the vehicle (as you stated). Unfortunately Inno doesn't have a roof rack fit for your 2006 Chevy Cobalt but I do have a different recommendation for you to transport your skis and snowboards. For your application I recommend going with the Rhino-Rack roof rack that uses the 46" Euro Bar Crossbars # RREB118B. To complete this system you also...
    view full answer...

  • Ski rack for 2014 Subaru Forester Without Crossbars
  • The Inno Dual Angle Ski and Snowboard Carrier - Locking - Fixed Mounting Points - 6 Skis or 4 Boards # INTX726 is a fixed point mount system that will require fit kit # INTR128. This combination will not require separate crossbars for a fit on a naked roof without side rails. If you have the factory side rails that run front to back, then unfortunately you will need the crossbars for a compatible ski rack. I've attached a link to all the products compatible with the traditional aero...
    view full answer...


Do you have a question about this Ski and Snowboard Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ski and snowboard racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ski and snowboard rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Expert Research:
Adam R
Updated by:
Sarah W
Updated by:
Matthew S
Written by:
Ronnie R
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.