Will Inno Gravity Ski and Snowboard Carrier with Channel Mount fit a 2014 Subaru Forester?

Question

Question:

Will the Inno Gravity rack fit a ‘14 Subaru Forester?

asked by: Crayton H

0

Expert Reply:

The Inno Gravity Ski and Snowboard Carrier will fit on your 2014 Subaru Forester if you have aftermarket crossbars. The OEM crossbars did not have the top channel so if you have those bars I recommend the Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 6 Fat Skis or 4 Boards # INA951 for a similar rack.

If you don't already have crossbars, I recommend the following options that will be compatible with the Inno Gravity carrier:

If you have the factory side rails that run front to back, then I recommend the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 50" Long # MPG215. These crossbars will have the track you need and will fit your vehicle well.

If you have a naked roof without any side rails, then I recommend the Inno Aero Roof Rack. You need the 48 inch aero bars # INXB123-2, feet # INXS350, and fit kit #

expert reply by: Jason S

0

click to enlarge

Answer 1

I do have a great option for your 2019 Ford Flex but the SportRack Semi-Custom Roof Rack part #SR1098 is not a fit for the Flex. SportRack does not make a roof rack for the 2019 Ford Flex at this time. I recommend to use an Aero bar system on the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 7

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 8

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 9

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 10

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 11

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 12

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Will Inno Gravity Ski and Snowboard Carrier with Channel Mount fit a 2014 Subaru Forester?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching