See what our Experts say about this Brophy Accessories and Parts

• Do Fold-Out Steps Need to be Removed When Mounting Brophy Scissor Steps
  That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as when your steps are folded up there is no interference in that area the Brophy steps will be a great option. I added a photo for you a customer sent in which shows the bracket and steps installed so you can get an idea of how they mount. The...
  view full answer...
  
• Recommended Hand Rail For A 2017 Jayco Jayflight SLX
  The first thing that comes to mind is a folding grab handle since it will permanently install to the side of the camper. A really good option is the Lend-a-Hand Extra Large Folding Grab Handle # AM-533. The handle itself is 37" tall and 25-1/2" wide so there is plenty of railing to grab on to. It can be installed on either flat or corrugated surfaces, you just want to be sure it is secured to the wood framing or a wall stud. The picture below shows one installed on a camper very similar...
  view full answer...
  
• How to Install A8000 Torklift All Terrain Landing Gear on Scissor Steps with Rivets
  Great question! The All Terrain Landing Gear for RV Scissor Steps, # TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps # AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill bit. Once this is completed, you will replace the lower hoop of the steps using the hardware that is provided. (See attached diagram.) To further increase the safety of your steps, you may want to consider adding a handrail like # AHR3. I've...
  view full answer...
  
• Recommended RV Steps For Use On Unlevel Ground
  I believe I have exactly what you are looking for if you want to keep your current steps. It is the Camco Adjustable Height Platform Step - Aluminum - 19" Long x 14-1/2" Wide - 1,000 lbs, # CAM43676. This adjustable locking step legs allow you to independently adjustable legs for hich and level the step on uneven surfaces. The legs fold under for compact storage and easy setup. If you'd like to add scissor steps, I recommend the Brophy Camper Scissor Steps - 3 Steps - Aluminum - Non-Slip...
  view full answer...
• What Size Scissor Steps for Rear Ramp of Toy Hauler 32 inches From Ground?
  If 32 inches is the height unloaded, I think you are cutting it too close. With your toy hauler loaded, the height will definitely shorten a few inches. You would be better off with the smaller one that is 24 to 30 inches tall. You could mount the steps a little lower to accommodate the unloaded height of the toy hauler. The Aluminum Scissor Steps, 24 inches wide, 24-30 inches tall (part AS23) can be fully extended to 30 inches tall, or can be slightly compressed so that they measure 24...
  view full answer...
• Dimensions of the Parts that Make Up the Aluminum Hand Rail for 3 Step Scissor Stair # AHR3
  I went out to the warehouse and pulled an Aluminum Hand Rail for 3 Step Scissor Stair, # AHR3, to take some measurements. The longer piece is 43-1/4 inches long. The shorter piece is 39-1/8 inches long. Both pieces are constructed of 1-1/2 inch square tubing. The brackets is 12 inches long and 2 inches wide. The bolt holes are 2 inches apart, but the 2 center most holes are 6 inches apart. I have included some pictures showing these measurements for you.
  view full answer...
  
• Aluminum Scissor Steps AS23 Dimensions
  The height measurement on the item you selected is 24 to 30 inches to the mounting bracket. As long as the distance from the area the stairs are to be mounted straight down to the ground is within this 6 inch range the stairs will work nicely. We have other sizes of steps (see links below) if this size is not correct for you. I have posted links to hand rails for the adjustable steps also. If I can be of further assistance let me know.
  view full answer...
• RV Step Rail Recommendation That Has Round Handle
  I would agree that a round handle for RV steps would be easier to grab and would feel more natural than a square shape. A better option for you might be the Lend A Hand Handle part # AM-533 which does have a round handle shape and has a pad for grabbing onto that helps as well.
  view full answer...
  
• Scissor Stairs Hand Rail for Left Hand Use
  The Stromberg Carlson Rail Mate # AP-101 is intended for left hand mount. All 3 Brophy Handrails # AHR3 for 3-step scissor steps, # AHR4 for 4-step, and # AHR5 for 5-step can all be mounted on either side of the stairs. All 4 products are made to fit most scissor steps.
  view full answer...
• Do the Brophy Camper Scissor Steps # SS03 Self-Adjust
  The Brophy Camper Scissor Steps # SS03 do have a little bit of adjustability. They have an expanded height range of 24" - 30" and self-adjust to the terrain. You can add a handrail # AHR3 for a little more stability. Please note that these are not meant to be mounted permanently. There is a mounting bracket that comes with these steps which allow you to install and uninstall them easily.
  view full answer...
• Recommended Scissor Steps for Varying Distance From Door to Ground
  I took a look at each of the scissor steps we carry and there are not any available that have the range of 18" to 26" you are looking for. You are not going to want to use the Brophy Camper Scissor Steps # AS23, which have a range of 24" to 30" when your door is 18" off the ground so your best option would be to use both the # AS23 steps as well as the Brophy # AS02 which have a height range of 18" to 23". I've added a link to video reviews of both steps for you to take a look at.
  view full answer...
• Are the Steel Brophy Camper Scissor Steps # SS03 Available in Aluminum
  We do have the Brophy Camper Scissor Steps # SS03 in aluminum. This is found on our site as part # AS03. Please note that the aluminum version has a weight capacity of 250 lbs as opposed to the 300 lbs of capacity that the steel version has. If you would like to add some more stability to these steps then the handrail # AHR3 can be used. The manufacturer specifically states that these steps should not be mounted permanently. You really should remove them before you start traveling.
  view full answer...
• Hand Rail that Can be Used with Brophy Scissor Steps AS03
  Brophy has a hand rail part # AHR3 that you can use with the Brophy camper scissor steps part # AS03 that you have but the Stromberg Carlson set you mentioned would not work as it is designed for a different set.
  view full answer...
• How Does the Aluminum Hand Rail # AHR3 Attach to Trailer
  The Hand Rail part # AHR3 that you referenced includes a mounting bracket that will attach to the trailer and allows a pin to run through the handle to secure it to the bracket. For more info check out the review video I attached that shows the 4 step version of this handrail and how it attaches to both the RV and steps.
  view full answer...
• Brophy Camper Scissor Steps Compatible With Bumper Height Of 24 to 28 Inches
  The Brophy Camper Scissor Steps - 3 Steps - Steel - Diamond Tread - 18" Wide - 300 lbs # SS03 will mount to your truck bumper. They use a mounting bracket with a "V" clamp to secure the steps. The steps will expand from 24" - 30" high. The bracket allows the steps to be mounted when the vehicle is stationary and require removal prior to travel. You may be interested in the Aluminum Hand Rail for 3 Step Scissor Stair # AHR3 which secures to the steps and gives you that extra stability.
  view full answer...
• Can the Aluminum Hand Rail for 3 Step Scissor Stair Mount on Either Side of the Stairs
  Yes, the Aluminum Hand Rail for 3 Step Scissor Stair, item # AHR3, is designed to attach either side of the Aluminum Scissor Steps, item # AS23, so you can use two of the hand rails with the stairs.
  view full answer...

Do you have a question about this Accessories and Part?