Video Transcript for Comprehensive Review: B and B RV City Water Inlet

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this B&B polar white RV city water inlet. Now this city water fill with check valve is going to replace any leaking or damaged valve on your RV. That check valve is going to prevent backflow into the city system when under pressure. This lead free brass is not going to rust or contaminate incoming water.

And the removable screen filter that you see right there is gonna be very easy to clean and replace when necessary. And the cutout required for this is three and a half inches and the rear water connection is a half an inch MPT. And let me go ahead and give you the measurement of that outer diameter here. So lining that up as you can see there, it's four and three quarters inches on that outer diameter of the flange. And the valve depth, see if I can line that up.

It's right at two and a half inches. And then the dish depth is about three quarters of an inch. And this grip collar here is going to let you easily attach and detach your hose. And this tethered plug is going to protect the fill point when it's not in use. This is made here in the USA, of corrosion proof plastic that is UV stabilized to maintain its color.

You're not gonna have to worry about it yellowing, it's gonna hold up really well for you. This does include the mounting hardware along with some butyl tape. And this is NSF, IAPMO, CSA, and TEI certified. Well, I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you.

Again, my name is Andy, thank you for joining me.