Video Transcript for What to Know About the Camco Water Hose Brass Elbow

Today, well be taking a look at the Camco water hose brass 90 degree elbow, part number CAM22505. As you can see here, we are out our city water connection on the back of our camper. Right here is the actual fitting. Its a 90 degree brass fitting. Female end here has a rubber O-ring washer style that prevent leaks. Male end is threaded so this can be used on either the back end of the camper like this and you connect your garden hose here so it will go into here and then your garden hose will go in. It will go like that. Now, this can also be used at your home.

You can use it on an outside water spigot. On that case, we would just connect it here on this end and then put your hose down here so it is more solid. It can be used in the home, in camper, freezers 00:00:52, water spigot, pretty much wherever you need to use a 90 degree fitting. By being like this, it will help take the strain off of your hose if we had a situation where we needed the hose to drop straight down. This will eliminate the strain on the fitting here as well as on your hose itself so that you dont have to put the hose in such a binding grip like bend it. The brass fitting actually takes the place of the bend. I will go ahead and just thread it in the back of the city water connection here on the camper but as you can see here, the bumper would be in the way for this particular camper but you can thread it in.

You can take your hose and thread it in underneath Now, ideally it wouldnt have a bumper here on the way but if this wasnt here, by having this 90 degree brass elbow, it will actually take the strain off of your hose so youd have less chance of getting it kinked right here because the brass fitting takes the place of that. As Ive shown earlier, lets say if were going to actually connect it to our water spigot at our house. We would thread this in down here like this. Tighten it down. A washer is in there to give us a leak free seal. Were going to take the other end of the hose or the female end and thread it on like this so it is a versatile 90 degree elbow.

Again, it would take the strain off of it. You have less chance of kinking because its already just a straight down and the strain is put here on the elbow not in your rubber hose. Now, if youre on a situation like we have here where your water hose connection is right in line with your bumper, Camco does make another solution. Instead of a 90, its actually a 45 degree so wed thread it in to go at 45 and then your hose would clear your rear bumper. This is part number CAM22605. Either one of these will do the same function. It all just depends if youre on a situation where your bumper might interfere with where the hose should be.

As you can see, the Camco 90 degree elbow helps eliminate strain on your water hose. It allows to extend the life of your hose by preventing it from being crimped. This fitting is perfect for your RV or for use around the house. It is made up or brass construction which is tough and durable. With that, that will complete our look at the Camco water hose brass 90 degree elbow, part number CAM22505. .