Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White
(662 reviews)
Price: $55.60
In Stock
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White
Item # V2092SP-28
Retail:$88.26
Our Price: $55.60
You Save: 37%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (662)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2092SP-28
- Vent
- Roof Vent
- No Fan
- 14W x 14L Inch
- White
- Ventline
- Plastic and Metal
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.
Features:
- Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
- Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Snap-out screen is easy to clean
- Polar White interior trim piece (or garnish) is included
- Made in the USA
Specs:
- Included garnish fits roofs 1-7/8" to 3" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes are available (sold separately)
- Cover color: white
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Vent extends above roof:
- 4-1/2" Closed
- 10-3/4" Open
- 2-Year limited warranty
Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Attach interior garnish piece with #8 screws.
V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - V2092SP-28
Average Customer Rating: 4.7 out of 5 stars (662 Customer Reviews)
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.by: Stephen 04/25/2024
Shipping was above average, very quick.
Product was what I expected, HOWEVER The last one I purchased from another co. Included all the required screws. I was miffed when I opened the box and saw no screws, and the directions which I do not need were for a different application. Overall pleased.
by: Thomas03/13/2024
Was missing the retaining clips on both items. The old ones were ok.
by: Jorge 11/03/2023
What I'd like to know is how ETrailer got my Roof Vent stuff to me so quickly. Not only that, but I get a note right after I ordered referencing a prior order (for the same thing...different trailer) and I'm saying to myself, "These folks take customer service to another level." Everything ordered was in the box and delivered intact.
by: Mike01/06/2024
Easy installation and operation.
by: Thalia05/15/2024
The knob to open and close the vent was not not screwed down. It would make it very difficult to open and close the vent
by: Vern10/12/2023
Fit the old opening just fine. Easy install, I had to install backwards because of the roof slope on my A-Frame trailer.
by: Jason05/22/2020
This was a great vent for my family's pop up camper that was passed down the family to me. The vent cover in the middle of the camper was broke into peices and was covered up for many years. No damage was down from the rain so I was thankful. This vent is great and It was real simple to install. And works perfectly and is for sure brand new in the box. Note: it did not come with screws, so you will need to get those along with your caulk tape and caulking of your choice. The instructions calls for size #8 screws. I used 1" long self tapping screws which worked perfectly for the job.
Thanks etrailer.com your fast shipping and reasonable prices, which got my camper as good as new now. I will be using you guys from now on, if anymore parts are needed in the future.
by: Mike 11/03/2023
Great product, perfect product without the handle
by: Bryan 04/04/2024
Thank you! Just what I needed.
by: David Van Aken06/03/2016
Trailer roof vent was of high quality and was self installed with no problems. Very pleased with etrailer.com.
by: Mike V.09/17/2013
Delivery was timely and arrived complete and intact. The Vent dome kit fit perfectly and I was able to install the assembly in a short time with excellent results. I will definitely return to e trailer for future projects.
by: Clint 03/27/2024
Everything worked out perfectly!
by: Ronnie 05/11/2023
this rating is for the service, have not installed the roof vent, the service and ordering process were outstanding, i had the item in hand 3 days after placing the order. Thanks for the quick turn-around, if i need anything else for my trailer you are definitely the first choice for me
by: Chris04/15/2021
Easy to install ( I highly recommend a good quality elastomeric caulk) the dome is a light weight plastic, had I known I would have spent more money for a heavier fiberglass unit.
by: Vivian09/26/2021
Was very pleased with the service and quick response. It got here sooner than promised and have already gotten it installed. It was used in the conversion of an enclosed utility trailer.
by: Thomas12/14/2023
Good product, easy to install.
by: Darrell E.09/26/2016
Received the vent faster than expected, installed is and work great! Removed the old vent and installed this unit, fits great and the screen is much better than the old one. Great price, fast delivery, installed easily.
by: Meredith08/14/2022
So easy to install. Did it in one half hour.
Meredith
8/15/2023
After ordering the wrong one customer service was awesome and finally installing the correct one, it works great. It was easy to install too.
by: Cindy 05/04/2023
Appears well made and easy to install. One of the great things is Etrailer sells repair/replacement parts so you don't have to replace the whole unit if something breaks or wears out. Nice unit and great price
by: Lester P.06/10/2016
Easy installation. Great for daytime light, and ventilation.
by: Jack C. Boal09/16/2017
Due to packing of shipment, heavy items were put on top of vent and vent plastic was cracked
by: Ronald04/25/2023
These were exactly what we were looking for to replace our existing yellow speakers. Perfect fit in our 2006 Kodiak Hybrid. Quick delivery and reasonable price.
by: Jose Manuel01/22/2021
Material could be a bit stronger but does the work! Good bang for the buck
by: Susan 10/02/2023
Everything was great. Loved doing business with you.
by: Ronald05/24/2019
I bought this vent to replace the one in my Pace American cargo trailer. The only alteration needed was to trim 1/2 inch off the inside trim, my roof was thinner. I found butyl tape & sealant at Lowes to complete the job. Vent looks great & I like the knob better than the crank, doesn’t stick down to snag stuff.
Ronald
5/25/2020
1 year later I wouldn’t change a thing, works great, looks great!
25
662
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Replacement Vent Lid for Ventline Northern Breeze Trailer Roof VentI do have an option for you but we don't offer a replacement lid for the Ventline AS-13M Roof Vent due to its age. If you want a quick fix you can go with a universal cover like the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent part # MA00-335001 but your best option is a full replacement like the Ventline Ventadome Trailer Roof Vent part # V2092SP-28.
view full answer...
- Replacement Ceiling Garnish for Roof VentIt sounds like you're looking for the ceiling garnish for a standard roof vent like # VA0445-34. I've linked our selection for you. Just choose the color and the measurement of the leg you need. The leg is essentially how tall the garnish is. If you can't find one the exact size you need you can purchase a larger one and cut it down to size. If you're looking for the complete vent assembly our most popular is the Ventline # V2092SP-28. It's a manual lift vent. If you need a vent...
view full answer... - Best Camper Tie Downs for 2022 Dodge 3500 Ram 3500 I recommend the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum # TL94FR front and # TL34FR for the rear. These rustproof and lightweight aluminum alloy tie-down inserts secure to durable stainless steel receiver brackets. The tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins. The TorkLift Locking FastGun Turnbuckles, # TLS9529-2-LK are quantity of 4, constructed of stainless steel with quick-release lever feature making it fast...
view full answer... - Need Replacement Roof Vents for a SunyBrook Titan 38BQS TrailerThe size of most roof vents on campers measure at 14-1/4 x 14-1/4 inches. This measurement is the length and width of the vent. The part you referenced # BV0554-03 may be the correct size, but there are different styles of hinges that you will need to know before purchasing. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-03 fits 14-1/4 square roof vents and has a continuous hinge. Unfortunately, there is not a master parts list where I can look up your...
view full answer...
- Pin Functions and Locations for Vehicle and Trailer Side 7-Way ConnectorsI have included a picture that shows how both a vehicle side and trailer side 7-Way are pinned. Ignore the colors and just look at the functions since, like you said, there isn't a standard color code. I have also included a link to the help article that contains the pictures.
view full answer...
- Will Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28 Fit an Interstate Cargo TrailerThe Ventline Non-Powered Trailer Roof Vent - White, # V2092SP-28, will fit an opening in a trailer roof that is 14-1/4 inches square and 1-7/8 inches to 2-3/4 inches thick. If these dimensions match what is currently on your trailer, this vent should fit. Based on the research I did for this model trailer, it seems as though it does use the standard 14-1/4 inch square vent. I have included a link below to all of the vents and vent covers we carry.
view full answer... - Replacement Roof Vent for 1979 Jayco Pop-Up Tent TrailerWe do have many types of RV vent items you can see on the linked page including manual and fan-powered models, however, none measures 10 x 10. The vast majority of RV roof vents in use are 14 x 14-inches, like # V2092SP-28, and fit into roof openings that are generally 1/4-inch larger in each dimension, 14-1/4 x 14-1/4. If it happens that you measured the trailer's interior trim ring, or garnish, this could have the 10 x 10 dimension you noted. I know it is more challenging to remove the...
view full answer... - Replacement Trailer Roof Vent and Installation KitMost RV roof vents are the standard 14 x 14-inch size which is the size that replacement lid # BV0554-03 fits. We can help you with just a new lid if that is all you need and we can also supply a whole new vent assembly if you prefer. If you want to install a complete new 14 x 14 vent you can select one from the page I linked. We have manual vents without fans like # V2092SP-28 and both 12V DC-power vents like # MA00-07500K and 110V AC-power units like # V2128SP-01. At the top of the...
view full answer...
- Will Ventline Roof Vent Fit 1988 Holiday Rambler ImperialWhen replacing the roof vents on your 1988 Holiday Rambler Imperial RV, you will want to take a couple of measurements. The Ventline Roof Vent, part # V2092SP-28, measures 16-1/2 by 16-1/2 inches on the outside edge. The part of the vent that fits in the roof of your RV measures 14-1/4 by 14-1/4 inches, and the metal portion of the vent measures 3-1/2 inches high. If these dimensions match the opening size for your RV then this will work for you. I also recommend the installation kit...
view full answer... - Replacement Roof Vent For 1999 Leprechaun RVFor a manual vent replacement, I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28. For a powered vent with manual lift, I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim # V2094SP-28. For a powered lift, I recommend the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White # V2119-601-00. All of these are replacement options for your 1999 Leprechaun RV.
view full answer... - Options for Replacing a Roof Vent that is 12-1/2 by 12-1/2 inch That is Missing LidAll of the replacement vent lids we offer are designed to fit 14 by 14 inch roof vents so we do not have a lid recommendation I could make. Only thing I could recommend would be a replacement vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 to replace your entire roof vent.
view full answer... - Trailer Roof Vent Installation Kits and SealersThe Ventline trailer roof vent # V2092SP-28 does not include mounting screws or sealant. The reason is that trailer roofs vary in their materials and thickness and if hardware were to be included it would not work for each and every application. But we do have vent install kits and sealants to help you get the job done. I linked a video to help too. We have vent installation kit # 344270KITW for trailers with a metal roof; this includes both hardware and sealant. We also have a kit for...
view full answer... - Replacement Vent, Cabinet Latches, and Door Latch for a 1998 Jayco Pop UpI will be happy to help you out. For the ceiling vent, if you want to replace the whole assembly then you can use pretty much any of the vents we carry, see link. Most fit in a rough-in opening of about 14-1/4 inches square such as the Ventline vent # V2092SP-28. For the cabinet latches I would need to know what type you have now. You can email me some pictures if you'd like. I anticipate that thumb latches, such as # CAM44323, could work out well for you. The door panel isn't something...
view full answer... - Recommended Trailer Vent with Integrated Screen for 14x14 Inch VentUnfortunately we don't have the replacement screen for your assembly based on the photo. I recommend using the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 as a complete replacement as it is a very popular brand with the replacement screens if you should need it in the future. These vents are all a standard size that is referred to as 14 by 14 even though the rough opening is a 1/4 inch larger in both directions. If you prefer the smoke colored...
view full answer...
- Replacement Vent for Horse TrailerThere may be a solution for you, but the vents we carry with dimensions closest to yours are going to measure 14-1/4" x 14-1/4". To add the Ventline Ventadome # V2092SP-28 you referenced you could cut the opening in your roof a bit wider, to 14-1/4" x 14-1/4", allowing you to install it. This will also be helpful in the future to make it easier to find replacement parts or a replacement vent if need be. The Ventadome uses a garnish that fits roofs between 1-7/8" and 3" thick, though garnish...
view full answer... - Availability of Replacement Weather Seal for Ventline Ventadome Trailer Roof Vent # V2092SP-28I have good news for you! We do offer a replacement seal, the part # is BVD0455-01. You can see this item by clicking on the provided link.
view full answer... - Will the Ventadome Replacement Operator with Knob Work on a Plastic Roof Vent with Crank HandleKnob or crank handle is just a change in design, we need to determine how the lift bar attaches to the plastic cover on your roof vent. The operator you selected, # BV0115-04, will work with roof vent covers that have a slot that the rivet head at the end of the operator arm slides into and is then clipped in with the metal clip shown in the photos on the product page. Older plastic roof vents have a slotted bracket that is riveted in the underside of the roof vent so this operator arm...
view full answer... - Recommended Replacement Vent Cover for Ventline VentFrom the image you provided, it appears you have a Ventline vent with a continuous hinge design. While the RV industry does not have a VIN part look up developed the same as the auto side of things, I can make the recommendation that you need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents, # BV0554-01 for white or # BV0554-03 for smoke. I do also recommend that you consider replacing the entire vent. For the price point of the replacement vent cover relative to the...
view full answer...
- Recommended Replacement Roof Vent for a Ventline Ventadome Trailer Roof VentWhen you replace the roof vents on your trailer with the Ventline Ventadome # V2092SP-28, the replacement cover # BVD0449-A01 will be the right fit. It works with roof vent models V2092, V2094, V2119 and V2128. The color smoke replacement cover is # BVD0449-A03. We also offer an install kit that includes the necessary hardware and sealant to install the vent. The part # is 344270KITW. I included a few video reviews for you as well.
view full answer... - Replacement Roof Vent Lid For A 1996 Itasca Spirit MotorhomeThe MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001 does not have the slide bar in the middle, however, this vent lid will fit any roof vent on the market today and will fit your 1996 Itasca Spirit motorhome. We do also have the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00 or # V2092SP-28 if you do not need a fan. These do have the option with the slide bar. If you are able to provide a serial number or a model number and I can see...
view full answer...
- Replacement Trailer Roof Vent for a Ventline VB0568 Roof VentWe do not have any vent options with the attachment for the lift on the side, they are all in the middle. But the good news is, with a complete replacement, the attachment point does not have to be the same since the entire vent is being replaced. So the Ventline Ventadome Trailer Roof Vent # V2092SP-28 will fit as a replacement and is as close to the same as your VB0568 that we have available.
view full answer... - Roof Vent Recommendation to Replace Hengs Style that is Easily DamagedVent lid replacements are all specific to the vent that's installed on the trailer. If you are wanting a setup with a better lid design you'll have to swap out the old setup for a new one that has a lid design that is tougher. The Ventline Ventadome part # V2092SP-28 would be a great option to replace what you have.
view full answer... - Replacement Roof Vent Availability for a 2001 Triton Snowmobile TrailerYou will need to measure the roof vent you currently have to pick out the correct one. Most likely the dimensions will be 14 by 14 inches as that is basically the standard size. A very popular roof vent to fit a 14 by 14 inch hole is the part # V2092SP-28. To install this you would also want the # 344270KITW which comes with sealant and install screws.
view full answer... - Replacement Vent Cover for 2008 American Hauler Night Hawk Cargo TrailerIn order to determine if we have a replacement cover that will fit your trailer vent you will need to look at the hinge style of the old cover and also it's measurements. I have attached a picture to illustrate the different types of hinges. I have also included a link to all of our replacement vent covers. You can use the filters on the page to narrow the search. For example, if your current cover has a continuous hinge (kind of C-shape) and measures 14 inches x 14 inches, you could...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Raymond P
Updated by:
Kathleen M
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Adam Y
Updated by:
Isabelle B
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
3/20/2024
Let me get you over to customer service anyway. I know the old ones will suffice, but they should still know how it arrived to you.