bing tracking image
  1. RV TV Mount
  2. MORryde
  3. Wall Mount
  4. Extend
  5. Swivel
  6. 100 mm x 100 mm
  7. 200 mm x 200 mm
  8. 75 mm x 75 mm
MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 50 lb Capacity - Steel

MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 50 lb Capacity - Steel

Item # MR93ZR
Our Price: $140.99
RV TV Mount
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Even if your TV is crammed in a corner, you can still swing it away from the wall and swivel it up to 350 degrees toward the couch. Great Prices for the best rv tv mount from MORryde. MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 50 lb Capacity - Steel part number MR93ZR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (212)
  • Q & A (0)
  • Videos (1)
  • Photos

MORryde RV TV Mount - MR93ZR

  • Wall Mount
  • Extend
  • Swivel
  • 100 mm x 100 mm
  • 200 mm x 200 mm
  • 75 mm x 75 mm
  • 360 Degrees
  • MORryde
  • 50 lbs
  • Manual
  • Steel

Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Even if your TV is crammed in a corner, you can still swing it away from the wall and swivel it up to 350 degrees toward the couch.


Features:

  • Mount secures your RV's flat screen TV to the wall or a basement cargo compartment door
  • Full-motion mounting plate and arm swings 180 degrees away from the wall
    • Swivels 350 degrees around so it's easier to see the screen from anywhere in your RV
    • Tilts downward 10.5 degrees to help remove screen glare
  • Locking pin prevents the mount from moving around while traveling to the campsite
  • Durable, powder-coated steel construction resists rust
  • Bolt-on installation with included mounting hardware
    • Some drilling is required
  • Made in the USA


Specs:

  • VESA mounting patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm
  • Overall dimensions:
    • Fully retracted: 11-1/4" wide x 11" tall x 3-5/16" deep
    • Fully extended: 11-1/4" wide x 11" tall x 21-5/16" deep
  • TV mounting plate dimensions: 8-7/8" wide x 8-7/8" tall
  • Maximum load capacity: 50 lbs
  • 1-Year limited warranty


Easy to Adjust the TV Angle


MORryde RV TV Mount Swing Away

When you get to the campsite after dark and want to unwind with a good movie, you can easily adjust this mount so you can view your TV from any spot in the room. If your TV is crammed into a corner, simply pull the handle at the bottom of the mount to swing it away from the wall up to 180 degrees. This makes it easier to see the TV screen than you could with mounts that extend straight forward.


MORryde RV TV Mount Swiveling

You can also almost fully swivel the mount around 350 degrees. This means that the whole family will be able to see the screen wherever they are in your RV living space, whether you want to watch a movie while folding laundry or the kids want to watch one of their favorite shows while eating lunch at the dinette table.


MORryde RV TV Mount Tilting

The mount can also tilt downward up to 10.5 degrees. This is perfect for reducing the glare on your screen on a sunny day or entertaining the kiddos while they play on the floor during a rainy day.


How to Measure Your TV for VESA Mounting Patterns

VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.


This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
VESA pattern diagram

If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.



TV1-006H More Ride RV Wall TV Mount for TVs Up to 50 lbs - Swing - Steel

Installation Details MR93ZR Installation instructions



Video of MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 50 lb Capacity - Steel

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of MORryde RV TV Mount - Full Motion TV Wall Mount Bracket - MR93ZR

Hello everybody. This is Jeff at etrailer.com. Today We are going to take a look at this MORyde full motion TV wall mount. Now this will let you securely Mount your TV to your RV's wall and allows you to swivel tilt an extend it so you can find the best view. It has a wall-mounted bracket securely holds your RV's television and it has a spring loaded pin down here. This knob here that you just pull and it'll hold the spring loaded pin holds it in the closed position when you're traveling.

and then when you're not traveling, you can just pull this knob down and that allow you to extend the TV. Just to try to show you here. If I pull that up down, you can see that it'll release it and it allows you to fully extend this out again you can tilt it to whatever position you need. You can see how far it actually extends it out and you can see the range of it. So to allow you to swivel tilt, you can tilt right here.

If you just loosen the wing nut here you can see that allow this where your TV's connected can actually tilt also. And you just tighten it down into the position you need. And again, you can even extend it out to find the best viewing angle. Now, extending it out. It'll go out all the way up to 18 inches.

The tilting we mentioned for your correct viewing angle also. So basically the pivot point rotation for the tilt is about 10 and a half degrees. The swivel portion This right here. is gonna actually allow you to swivel about 350 degrees. And then the swing portion of course will allow you to go a whole 180 degrees.

And then what's nice about this is when you're not in the RV and you're ready to get on the road. You just push the TV, just like this, turn it. And then when you push it you can hear that click, that that pin down here that's locking it there, hold it up against the wall so that it's not moving around or vibrating it or just stay up against the wall. Now they do also offer this optional optional chain here that you can attach to the knob. If when you extend or when you Mount your TV on to here it might be hard to reach that knob behind the TV. You can just unscrew this knob, put one of the rings of the chain over it, and then screw it back in there. And then that'll allow you to pull that and it'll pull this down to be able to release it. It is a nice compact design, saves you a lot of space and it is a very simple installation. It offers you three VESA compliant mounting path patterns for your TV. And the included hardware is all included. It'll allow a TV that has a 75 millimeter by 75 millimeter pattern, a hundred millimeter by a hundred millimeter pattern and the 200 millimeter by 200 meter millimeter VESA pattern. This part is made in the USA few specs on this when it's fully retracted like it is in the lock position. Overall width at the widest point is gonna be 11 and a quarter inches height including the knob is about 11 inches tall. And the depth. Let me just go ahead and loosen this and push the tilt all the way back in. So then your total depth when it's fully retracted this way it's got to be three and five sixteenths of an inch deep. Now, when it's fully extended, you'll samp the same width of 11 and a quarter inches, the same height of 11 inches tall, but your depth is gonna go all the way to 21 and five sixteenths inches because you're getting 18 inches that you can extend it out. Now, the TV mounting plate itself the width eight and seven eighths inches the height eight and seven eighths inches and the maximum load capacity on this Mount is 50 pounds. But as we mentioned, it comes with all the hardware to install your TV comes with the mounting hardware and install this to the wall of your RV, but that should do it for the review on this more ride, full motion TV Wall-Mount..

Customer Satisfaction Score:


Customer Reviews

MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 50 lb Capacity - Steel - MR93ZR

Average Customer Rating:  4.6 out of 5 stars   (212 Customer Reviews)

Secure this TV mount to the wall in your RV if you have the space for it so you can enjoy family movie night. Even if your TV is crammed in a corner, you can still swing it away from the wall and swivel it up to 350 degrees toward the couch.

by:

Solid TV mount. Satisfied Customer



by:

Seems solid. A little challenging to get TV with Plate mounted to the swing arm but not a big deal.



by:

very well built but did not come close to fitting my new smart tv

Etrailer Expert

Brooke M.

6/10/2022

Something to double check before purchasing is the dimensions. Youll want to make sure your tv fits the measurements above in the product description. What are the measurements on your tv?



by:

Great speedy service and communication!



by:

Had it in my ice castle wheel fish house that burned down it worked great! Ordered new house then reordered this bracket, it’s awesome.



by:

Very pleasant and helpful staff. They’ve been there for my needs. This company will satisfy your every need.. I will continue to work with this company!
Regards



by:

Vern

12/8/2022

Excellent



by:



by:



by:



by:



by:

Enhanced the appearance and made steps safer when accessing them by illuminating steps and small surrounding are. Excellent addition for RV’s that do not have factory step light.



by:

Easy to install and use. Works as described and fits nicely in the space available between our mounting wall and slide clearance zone.



by:

These lights are worth every cent I paid for them from a safety perspective. They illuminate the steps going into my travel trailer greatly.



by:

Very pleased with the product. Seems sturdy and well made. E trailer is the go to place for my RV needs. Thanks.



by:

The bracket is well made, and I really like the locking feature that securely holds the TV in place when we are on the road.



by:

We found this mount and use it in our Music Studio. It was the best solution for mounting our tv on the ceiling in the middle of the room for entertainment and recording!



by:

We are using this to mount a Jensen JTV24DC 24" LED DC television to the ceiling in our converted 2021 Ram Promaster 3500 van. It is located over over bed area and in a passenger side corner. It fits great and works just as well. I am able to hook up my computer to it for work, as well as to stream movies, church services, YouTubes, etc. It holds the television very well with no noticeable rattles or clanks. Being able to rotate it to various viewing spots is great as well. We can even open our back doors and watch it from outside! Better than any drive-in, for sure.



by:

Love the lights have had problems with one and etrailer sent me a new light then the other light when i replaced the batteries quite working.



by:

These really light up the steps. Can't miss them now.



by:

Easy to mount. Lights are really bright!



by:

I don't have them installed on my camper steps yet. I did take one out of the package and looked it over. I have it working in our utility room for a walk-in light. Works good, nice and bright. Anxious to get them installed on our camper steps. I like the feature that they shut off after no movement. No lights, no bugs. I also like the addition bracket that comes with the light for mounting. Not all steps are created the same. Definitely would recommend this product.



by:

Got one pair for a gift and kept 2 for our rv. One of ours works good and the other one looses contact with the battery lid and doesn’t work. Tried taping the lid on better and worked again for a few a few days.



by:

Worked great at first, but now the battery latch doesn't hold the batteries in.



by:

Kept falling off and the battery compartment finally quit staying closed so batteries were always falling out


25
212
Show More Reviews

See what our Experts say about this MORryde RV TV Mount

  • Rattling TV Wall Mount in Winnebago Journey
    Yes, the MORryde Wall RV TV Mount - Fixed item # MR28ZR has a lot of movement in it based on how you have to install it. I have linked a video and if you watch it around the 1:44 mark you will see how the top connection point between the wall mount and the tv bracket is a simple hinge that is not bolted together like the bottom. This will provide a lot of side by side movement that causes rattling when your Winnebago is driving down the road. Throughout the video you can hear it rattling...
    view full answer...
  • How To Choose Correct Wall Mount TV Brackets for RV
    I do have TV wall mount options for you though none are specific to any one model of RV. The MORryde Wall RV TV Mount part # MR93ZR is a great option for example and allows you to mount any TV to the wall 50 lbs or under that uses the following standard VESA patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm. If this won't work, I have attached a link with a list of all our tv mount options.
    view full answer...
  • Recommended RV TV Mount For A 42" Insignia TV
    You're correct, the MORryde Wall RV TV Mount # MR57RR does only have a 20lb capacity. The # MR57RR drops down and has side to side horizontal tilting, but does not have a vertical tilt for the connection point to the TV. The closest option we carry to what you're looking for is the MORryde Wall RV TV Mount # MR93ZR. This mount has a 50lb weight capacity and can tilt 10.5 degrees. It won't drop down like the # MR57RR, but instead will swing 180 degrees where arm attaches to wall mount...
    view full answer...
  • Wall Mounting Bracket For Flat Panel RV TVs Size Requirements
    VESA Standards require the bolt holes to be the same sizes but the larger the tv the larger the bolt pattern is. You'll typically see non VESA bolt patterns on TVs 42" and up. So while the weight will be ok on the Wall Mounting Bracket for Flat Panel TVs - 13" to 27" Screens - 3 Point Pivot Item # MAF50, the bolt hole pattern won't line up. For a 32" TV you'll most likely be needing a 200mm x 200mm bolt pattern which you can get with the MORryde Full Motion TV Wall Mount - 50lbs Item # MR93ZR.
    view full answer...
  • TV Mount for 50 Inch Jensen JE5020 RV TV
    The table top stands we have use a 100x200 VESA mounting pattern while your 50" Jensen JE5020 has a 200x400 VESA mounting pattern. For your application you can use a different mount like the MORryde Counter RV TV Mount # MR42ZR or the MORryde Wall RV TV Mount # MR93ZR and then use the Adapter Plates # MR74RR to match the larger mounting pattern you have. These mounts are a different than the one you asked about because these actually bolt into place instead of just sitting on top of a...
    view full answer...

Do you have a question about this RV TV Mount?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Leah S
Updated by:
Leah S
Employee Mary K
Updated by:
Mary K
Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.