Want to settle down for family movie night but your TV is awkwardly crammed into the corner? We love that this mount lets you swing it away from the wall, swivel it around, and tilt it down so everyone can see the screen from anywhere in the RV.
Features:
Specs:
If your TV is crammed into a corner and you want to unwind with a good movie, swing the mount up to 17" away from the wall. You can also almost fully swivel the mount around so the whole family can see, and tilt it up and down and side to side to help reduce any glare.
VESA is an industry standard for measurements given in millimeters used to mount TVs. To figure out your TV's mounting pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
If your TV's mounting pattern requires a 300mm x 300mm or 400mm x 400mm configuration, you can use MORryde's TV mount adapter plate (MR74RR - sold separately) for the right fit. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, Steve here with etrailer.com. Today, we're looking at our MORryde RV TV Wall Mount that can extend, swivel, and tilt, and is capable of holding a 50-pound max TV. So, folks, with this mount, you can secure your RV's flat screen TV to the wall, or even a basement, cargo compartment door, exterior, whatever you really want. It's got a full-motion mounting plate that lets you adjust your TV's viewing angle. It can extend out to a full 17 inch, like so. And you simply have a locking tab here when it's closed, where you would just pull on the cable to release it.
So I'm gonna fold it all the way back up here. Let me zoom back out, show you the best way. Now, keep in mind, there's obviously no TV on this right now, so it's probably not gonna be the easiest to bend. And with that part flat, and then it would sit pretty much flat like that. Let's zoom back in, give you a better view.
Keep in mind, this is loose because I don't have anything tightened, just wanna show you for reference. And, again, that pull chain, that tab, when you pull that chain up, it's gonna release the locking mechanism to then allow you to tilt the TV out away from the wall all the way. And then, again, even from there, you can tilt again, and you could even tilt this part here up or down accordingly. So I'm gonna leave it kind of like this, just so I can get it to stand back up for us here for demonstration purposes hopefully. There we go.
Now it does swivel 350 degrees, not 360, 350, to accommodate those awkward furniture configurations. You can extend it as far out as 17 inches to make it easier to see that screen. And you can tilt up or down eight degrees either direction to help remove the glare. Now the locking pin that I showed you with the chain here, that's gonna prevent the mount from moving around on its own, especially while you're traveling to your campsites or wherever you're going. The whole thing is made of a nice, durable steel, and it's been black powder coated to resist rust and corrosion.
It is a simple bolt-on application, you've got all your VESA mount patterns that are available here. I'll put them on the screen. You've got mounting hardware here with all the washers, and the different VESA mount screws. And the VESA mount is gonna be whichever hole size matches your TV, but you wanna make sure your TV has one of these four options for the VESA pattern, otherwise, this probably won't work for you. It's got a nice one-year limited warranty. Again, a max capacity of a 50-pound television. Now, as far as some dimensions, when it's fully extended away from the wall, it can go 17 inches, like I mentioned. When it's fully retracted, it's only about 2 5/8 inches deep. Now as far as the base mount plate dimensions, this back part here, let's go ahead and close this up. Lock it back in, there we go. So this whole panel here, this base mount, is nine inches tall by 6 1/2 inches wide. Well, folks, that's gonna wrap it up for our look at this MORryde RV TV Wall Mount. I'm Steven, thanks for watching.
Order arrived quickly and in good order.
Great speedy service and communication!
Worked great
Works as designed..strong and sturdy
Very pleasant and helpful staff. They’ve been there for my needs. This company will satisfy your every need.. I will continue to work with this company!
Regards
Solid TV mount. Satisfied Customer
I ordered my tv mount on a Saturday night and it was delivered by Tuesday.
Very impressive.great company to order from!
Well built bracket & tremendous customer service.
Seems solid. A little challenging to get TV with Plate mounted to the swing arm but not a big deal.
The bracket is well made, and I really like the locking feature that securely holds the TV in place when we are on the road.
Wow, this filled the bill for me. It is heavy duty and allows me to extend the tv so that everyone can see the total screen from the coach. It also has a positive lock when traveling down the road. Glad I purchased it.
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.