Customers prefer these similar products
Secure this TV mount to the ceiling or cabinet of your smaller RV so you don't have to sacrifice any of your limited wall and counter space. You can slide your TV out of a cabinet, flip it downward, and swivel it toward the couch for movie night.
Features:
Specs:
If you have a smaller RV or converted van without much functional counter space, you can mount your TV to the ceiling, inside a cabinet, or at the top of a basement cargo compartment so you can conserve what little room you do have for the camping essentials you absolutely need. When you get to the campsite after dark and want to unwind with a movie night, you can easily slide your TV out of the cabinet and flip it down from the ceiling. And after the movie is over, flip the TV up, slide it back into the cabinet, and use the integrated locking pin to secure it out of the way so your already-small space doesn't feel even smaller.
If your RV TV is crammed in a corner, you can swivel the mount 65 degrees in either direction for the perfect view from your couch or recliner - no more craning your neck or missing the best part.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this MORryde Flip Down Extending RV TV Ceiling Mount. This is going to secure your flat screen television to the top of your basement's cargo area or your RVs ceiling or inside a cabinet. Now is going to, obviously, be mounted onto the ceiling. So I've kind of got it upside down right now but I can flip my screen over so you can see it as it will be mounted for you, typically. So this does swivel 65 degrees in either direction so you can get the best viewing angle for your setup.
But of course, the main feature is that it is going to flip up, like so and then it will slide in so that you can have the TV stashed away when you're getting ready to travel, or you're not using it so that you can make the most of your RV's interior space. And this does slide 17 inches, and it secures with these locking pins. So I'm gonna flip my screen again feel a little bit easier for me to show, but this is going to secure with these locking pins here that are going to make sure that it is locked in place. And so we're not going to have to worry about it moving around as we're traveling. You are going to have to extend it first, so this lever has to be pulled and it needs to be extended before it will pass through this bracket here that keeps it from flipping up.
So when you have kind of a double system there with the latch and with these brackets, and so once we have it put forward, then we'll be able to pull this lever here and extend it or swing it like so. Now, when I have it up like this, obviously it's inverted from the way that you'll have it. You want it to tilt forward, it doesn't have a real nice stop, but I'm assuming that with gravity, it's going to hang freely. You'll have to tilt them out more like that. So will kind of hold up better.
This does have several different mounting patterns here for you. So your TVs with the visa 75 by 75 mounting pattern, the 100 by 100 mounting pattern, the 200 by 100 pattern or the 200 by 200 pattern will all fit on this and this does have a nice durable powder coated steel construction. So it is gonna hold up really well for us. It's got a maximum load capacity of 35 pounds, so you wanna make sure that you're not exceeding that capacity with your television's weight. This does install onto a solid surface with the included hardware here, so you will need to do a little bit of drilling for the mounting holes on the back side, drill through those holes or mark those holes and drill your spots.
Put the hardware through there. And you do wanna make sure that your mounting surface can withstand the weight of the Mount and the television. And as far as dimensions go our mounting plate here is right about eight and five eights of an inch wide by 16 inches tall. When we have it stowed like it is now, we're looking at about 11 inches from the side of one handle to the side of the other handle. So overall width is about 11 inches, and we have it completely stowed away. We got that Flip up instead. Our total height is gonna be about seven and a half inches tall, got a ruler here, so you can see that for yourself. So it's gonna stick down. Plus of course, the width of your television, about seven and a half inches there, and then our overall length. From the end of the tube here, there and see it's about 20 inches long. When we have it fully extended that width is gonna stay the same. Of course our height is going to change as we raise this up. So it's gonna be right at 16 and three quarters of an inch. I put this tallest portion up here and then our length. When we have it fully extended from the very front of our mounts, all the way to the back side here, we're looking at 38 and three quarters of an inch deep. So this is made here in the USA, so you can trust it is gonna be made to the high quality standards that we've come to know and trust for products that are made here in the US. I think this is very well built. Having those snaps in there, I'm very confident that it's gonna hold the TV stable, as we're traveling we're not gonna have to worry about it coming loose if we hit a big bump or something like that. And so I think it is gonna do a good job for you and give you that adjustability so that you can have it tucked up in a way and then bring it out when you're ready to use it. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (15 Customer Reviews)
Secure this TV mount to the ceiling or cabinet of your smaller RV so you don't have to sacrifice any of your limited wall and counter space. You can slide your TV out of a cabinet, flip it downward, and swivel it toward the couch for movie night.This is a great product to slide your outside TV into outside camper storage, took about 30 to 35 mins to mount, but after that it was time to enjoy nature and do some TV watching for the night. Would recommend this item to everyone that's looking for some outside R&R.
Works as advertised. Very happy with it and was a easy install
Service from etrailer was excellent as always. The TV mount is waiting for some mods in the storage area in our 5th wheel. So I am not sure about it yet, but I am sure it will work great.
Mount works great w/ a 50" Vizio in the basement!
Mount is sturdy and offers great mounting flexibility. The only reason I didn't give 5 stars is because there was no mounting hardware included. I think hardware was supposed to come with the mount. I don't know if it was lost in shipment or MORryde forgot to include it in the box. I took pictures but etralers website won't upload them for some reason.
installed RV mount into my Armoire, fixed a 42" flat screen onto it, taking up entire space inside my Armoire. The mount allows me to move the flat panel out and swivel out of the way to access items behind the flat panel. No loss in storage space. The RV Mount works great and holds the flat panel securely in place, would highly recommend this mount to anyone needing to hide a flat panel and still swivel the panel out of the way to access space behind it.
Alliance had to shore up the supports in the wall, and I’m happy to say that it’s still attached to the wall! I wish the coach held up to the rough roads as well as the tv mount has. The mount has performed well. Happy with our selection!
Derek
This mount is exactly what I was looking for! in our RV, I intend to replace an old CRT TV that is enclosed in a cabinet, with a flat screen TV. This mount will securely hold the new TV, yet allow me to extend it from the cabinet, and swivel and tilt as necessary. I can't ask for more!
Excellent quality product that arrives quickly! Thank you!!
Fast delivery and it's works excellent
Works as advertised
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.