Make the most of your RV's interior space with this sliding TV mount. Keep your screen off to the side or stashed in a cargo area and slide it out for movie night. Swivel your screen 120 degrees for an ideal viewing angle. Supports 50 lbs.
Features:
Specs:
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, I'm Ellen here at etrailer.com. We're taking a quick look at the MORryde TV wall mount. This is going to help to move your TV out wherever you need it to be, so it does slide along horizontally. I have this laid out flat on my table, but normally it'd be mounted on the wall like so. If you have an area where there's just not really a good spot for the TV to live on an actual wall, you could mount this in one spot and then slide the TV over so that you can actually see what's going on, and be able to have that at a good angle for you. Basically what's gonna happen is you could adjust this along the track.
There's just gonna be this piece that unlocks here, and that'll allow this to open up. It's kinda awkward to do without it being actually mounted. But once that's released, it's gonna slide along on two different tracks. You'll have one big one and then the smaller track. Once that goes all the way over to the side, you can actually rotate that around a corner as well.
If you pull the pin, it allows you to adjust the angle to a 45-degree, and then all the way to 90 degrees. It really makes for a very flexible mounting situation in your RV, in your camper, to make sure that you can always see the screen no matter where you might need to mount this. Then once you're traveling, locks that into place so it can't move. It's not gonna be sliding all around the place while you're going around corners or anything like that. It does have a pretty universal plate here.
This has all kinds of pre-drilled holes to match up with any of your VESA mounting plates. The back of TVs all have some version or some pattern that's gonna be included in this. It also comes with a bunch of different hardware to make it easy to mount up this piece and also to mount your TV to the bracket itself. It makes for a really nice way to keep that TV in a good spot so your whole family can see it. As far as the measurements with this, those are listed out on our website.
The fully-retracted would be like you see it here. Fully extended would be like I had it all the way out to the side. The mounting plate measures about 8 7/8 by about 10 1/8. The swivel can rotate about 120 degrees, and this can handle up to 50 pounds for the load capacity. That's pretty much all there is to it for our look at the MORryde adjustable, horizontal-sliding TV wall mount. I hope this has been helpful in deciding if this is the right mount for you. We do have a lot of other RV accessories here at etrailer.com, so be sure to check them out, and thanks for watching..
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Make the most of your RV's interior space with this sliding TV mount. Keep your screen off to the side or stashed in a cargo area and slide it out for movie night. Swivel your screen 120 degrees for an ideal viewing angle. Supports 50 lbs.
Works excellent!
I used this to put a TV in my RVs pass through. Works great and is very robust to say the least. My only recommendation is to have someone help with the install as the weight can make it difficult to mount by yourself. Don’t be fooled by the picture, that’s a 43” LG TV.
Review from a similar Sliding TV Mount in RV TV Mount
This mount is very heavy duty...in fact, it's heavy PERIOD! I looked at this mount and the mount with the adjustable base. I couldn't justify an additional $50 for some brackets that adjusted to the length necessary for your particular RV so I bought this mount and cut some 2x4's, painted them black and used them to obtain the proper length to clear the side of the storage door. I tried to install a 43" tv in the front storage compartment of our Montana but it was about an inch too wide. I returned that tv and got a 40" that should install just fine. I also got two 6' cables so I can hook one up to the Cable/TV connection and another to the Satellite connection. I'll route both to the tv and lable them so I can change them easier when that opportunity arises. (It's going to be difficult to say the least to get to the tv connections in the storage compartment once the tv and mount is installed). As I said, this mount is very heavy duty so additional steps will be necessary to support the weigh to the mount. All-in-all, a very nice mount.
Review from a similar Sliding TV Mount in RV TV Mount
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.