Secure this TV mount to the wall of your cargo compartment and slide it out for family movie night. You can swivel your TV toward your camping chairs and lock the mount in place with the integrated pin so it doesn't move around.
Features:
Specs:
Easy to Adjust the TV Angle
When it's a nice night and you want to unwind with a good movie outside your RV, you can horizontally slide this 20-1/2" out of your pass-through cargo compartment. Or if you have the interior wall space for it, and your TV is tucked into a corner, you can slide it to where it's easier to see the screen.
And no matter where you've set up your camping chairs, you can swivel the mount up to 180 degrees for the perfect view - no more craning your neck or missing the best part. Once you've positioned it to where you want, it'll automatically lock in place with the integrated spring-loaded pin. This prevents the TV from rattling around during the movie, especially if someone's walking around inside your RV.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this MORryde horizontal, sliding TV wall mount. This is a wall-mounted bracket that'll securely hold your RV's TV to the wall. The TV will mount to this mounting plate right here, and then the TV mount itself will slide horizontally up to 20 1/2 inches, and the end will swivel 180 degrees so that you can find the best viewing angle. Basically to show you what we're talking about, there's a little lever here, that if you push down on that lever, it'll release the mount from the pin right here. You can see it allows that to slide so far.
Once that gets so far, you can actually then take your mounting plate and slide that the rest of the way, so it gets you a total of 20 1/2 inches horizontally. And then once you get to the end over here, you'll see this knob that'll allow you to swivel with your TV mounted here. If you pull up on that knob and move your TV, every 45 degrees, it'll lock into place. Pull up again, you can see it's at 90 degrees. Pull up again, and it keeps going all the way, all the way to that side, so 180-degree swivel.
Also what's nice is when you're done viewing, this mount will totally lock into place to keep your TV safe when you're traveling in your RV. Basically, again, you'll just slide this all the way this way and then completely all the way that way, and then just push down on your lever. Again, that'll let it lock onto that pin, and you can see it won't go anywhere, so it'll lock into place. This TV mount does have a maximum load capacity of 35 pounds. It is a very simple installation.
The mounting bracket; let me flip it around here. You can see, here's the mounting brackets with the holes in it. Comes with the hardware to install this to your wall. It'll also come with the hardware to install your TV to the mounting plate. It is very simple installation.
It will accept three different VESA-compliant mounting patterns on your TV. If your TV has the 75-millimeter by 75-millimeter pattern, it'll work, the 100-millimeter by 100-millimeter pattern, or the 200-millimeter by 200-millimeter pattern. It will line up to these holes, and with the hardware, you can install your TV. This part is made in the USA. Few specs on this now, dimension-wise. When it's fully retracted like it is now, locked into place, width-wise, it's 20 inches wide. Height from bottom to the top now is about 13 inches tall. And the total depth from the back to the very front here is about 4 5/8 inches deep. We mentioned the extension. When you release it and extend it all the way out, it's 20 1/2 inches. So then your overall dimensions when it's extended; 40 1/2 inches wide, same height of 13 inches, same depth of 4 5/8 inches. The TV mounting plate, this portion right there; if we measure that, the width of it is 8 7/8 inches. The height is gonna be right at 10 1/8 inches tall. But again, just to go over the . Push down on this lever to release it to slide. Slide it just like that. Then you can slide the TV the rest of the way. When you get to the end, if you want, you can actually pull up from the knob and allow it to rotate whatever position you need. Gives you the best viewing angle. And then when you're done, just put TV back. Slide this back. Slide the horizontal portion all the way back and push down on that handle. It'll let it go onto the pin and lock it into place. But that should do it for the review on the MORryde horizontal, sliding TV wall mount..
Average Customer Rating: 4.9 out of 5 stars (12 Customer Reviews)
Secure this TV mount to the wall of your cargo compartment and slide it out for family movie night. You can swivel your TV toward your camping chairs and lock the mount in place with the integrated pin so it doesn't move around.Always timely deliveries and great customer service.
built well and works great for storage area in 5th wheel. I used 40 inch tv which worked out perfect.
This bracket is worth every dime.
Easy install, fits the TV, and absolutely secure during travel which is major reason for purchase.
Just recommended it to a friend who ordered it yesterday.
This mount is very heavy duty...in fact, it's heavy PERIOD! I looked at this mount and the mount with the adjustable base. I couldn't justify an additional $50 for some brackets that adjusted to the length necessary for your particular RV so I bought this mount and cut some 2x4's, painted them black and used them to obtain the proper length to clear the side of the storage door. I tried to install a 43" tv in the front storage compartment of our Montana but it was about an inch too wide. I returned that tv and got a 40" that should install just fine. I also got two 6' cables so I can hook one up to the Cable/TV connection and another to the Satellite connection. I'll route both to the tv and lable them so I can change them easier when that opportunity arises. (It's going to be difficult to say the least to get to the tv connections in the storage compartment once the tv and mount is installed). As I said, this mount is very heavy duty so additional steps will be necessary to support the weigh to the mount. All-in-all, a very nice mount.
I used this to put a TV in my RVs pass through. Works great and is very robust to say the least. My only recommendation is to have someone help with the install as the weight can make it difficult to mount by yourself. Don’t be fooled by the picture, that’s a 43” LG TV.
Works excellent!
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.