Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure this TV mount to a table or cabinet if you have limited wall space in your RV and don't want to block your windows. You can extend your TV out of the cabinet, swivel it toward the couch for movie night, and then retract it back at bedtime.
Features:
Specs:
Easy to Adjust the TV Angle
When you get to the campsite after dark and want to unwind with a good movie, you can easily adjust this mount so you can view your TV from any spot in the room. If your TV is set further back into a cabinet or enclosed nook, you can extend the mount forward up to 7" to make it easier to see the screen.
If your RV TV is crammed in a corner, you can swivel the mount 30 degrees in either direction for the perfect view from your couch or recliner - no more craning your neck or missing the best part.
The mount can also tilt downward up to 10.5 degrees. This is perfect for reducing the glare on your screen on a sunny day or entertaining the kiddos while they play on the floor during a rainy day.
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at this MORryde Extended Swivel TV Counter Mount. This is going to be a great option for you to get your television mounted in your RV. If you are wanting to mount it on a cabinet or a counter, this is going to be a great option to help save some space for you. So the way this works, you can have it retracted as it is now.
When you're traveling, it is locked in place. So it's not going to be moving around as you're going down the road hitting bumps and that sort of thing. But as soon as you get to your destination and are ready to watch some TV, just lift up on this lever here and you can slide that forward. That's going to extend about 6 and 3/4 of an inch out and then it will allow you to rotate from side to side so that you can get a great view and angle depending on the setup of your TV viewing room. You can also tilt this forward, different settings depending on what you're going to need.
If you need it to be a little bit tilted forward to have a downward angle, if you're looking up at it. So you're going to have a lot of adjustability here to make sure that you are able to see your television wherever this is mounted. And then just as easily lift up on that lever. Slide it back in, lock it in place when you're ready to travel again. Now this is going to allow you to mount it up to a 50-pound television.
There are three different VESA mounting patterns on our bracket here. So whether you have a 75 millimeter by 75 millimeter, a 100 millimeter by 100 millimeter or a 200 millimeter by 200 millimeter mounting pattern on your TV, this will work for you. That also include lots of hardware for you to get your TV mounted in place depending on the kind that you have. But that VESA mounting pattern system is pretty much the standard nowadays. So you will most likely have one of those three.
If yours are a little bit bigger than that, this might not be the right bracket for you but those are the most common. So it should work really well if you are wanting to have a counter-mounted system. As far as our measurements go, when I measured the depth here for being retracted, I'm measuring the full depth. So I measure from the front of your knob here all the way back. So if you wanted to have this in an enclosed cabin or something, you're going to have it need to have at least that much room and that is going to be 18 and 1/2 inches from the very front of our talking knob all the way to the back of our bracket, 18 and 1/2 inches. When we have it extended, we're actually going to be a little bit shorter because it's going to go from the back of our plate here up to the front. That's going to be 16 and 3/4 of an inch. Our overall height, we're at 16 inches tall, our width depending on how you want to measure it. If you just want to take the bracket itself, it's about 9 and 3/4 of an inch wide. I measured with these bolts here and I measured it to be about 9 and 5/8, so total width there. Of course your television probably is going to stick out quite a bit outside of this bracket. So keep that in mind when determining if this is going to fit for your application. Our mounting bracket here is right about 9 3/8 of an inch tall. So again, make sure that that's all going to work for you. This is going to be a really nice option. It's made here in the USA. So you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. Should be very easy to just get bolted down in place or wherever it is that you're wanting to mount this. And then you'll be able to hook up your TV and have all the viewing angles that you desire to make sure that you can enjoy your time in your RV. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
This was the perfect product for mounting a TV within a cabinet in a bedroom. The TV is larger than the cabinet width. Great design and worked well for my unique application.
installed RV mount into my Armoire, fixed a 42" flat screen onto it, taking up entire space inside my Armoire. The mount allows me to move the flat panel out and swivel out of the way to access items behind the flat panel. No loss in storage space. The RV Mount works great and holds the flat panel securely in place, would highly recommend this mount to anyone needing to hide a flat panel and still swivel the panel out of the way to access space behind it.
This mount is exactly what I was looking for! in our RV, I intend to replace an old CRT TV that is enclosed in a cabinet, with a flat screen TV. This mount will securely hold the new TV, yet allow me to extend it from the cabinet, and swivel and tilt as necessary. I can't ask for more!
Mount is sturdy and offers great mounting flexibility. The only reason I didn't give 5 stars is because there was no mounting hardware included. I think hardware was supposed to come with the mount. I don't know if it was lost in shipment or MORryde forgot to include it in the box. I took pictures but etralers website won't upload them for some reason.
Jenny N.
6/21/2023
This television mount does include hardware. I will have our Customer Service team reach out to you.
Fast delivery and it's works excellent
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike S.
10/29/2022
This TV mount has functioned flawlessly for the entire camping season. We couldnt be happier!