Backup Camera for 2022 Ram 3500 With Tailgate Removed
Updated 12/03/2025 | Published 11/27/2025 >
Products Featured in This Question
Question:
I have a 2022 RAM 3500 BigHorn with a non-360 camera in the tailgate. Id like a back up camera for my slide in camper, which I use with the tailgate removed. Showing video on the 12inch display would be great, or I could use the rearview mirror, which is useless when the camper is on. Here are photos of the connections on the removed tailgate. It looks like the white connector is coaxial and I have no idea about the other connector. Do you have any products that would work? Thanks!
asked by: Sam
Expert Reply:
Hi Sam; is there another connection in the vicinity of the one from your picture? The Brandmotion Tailgate Delete Backup Camera # BM22FR is designed to be used without the tailgate. See the attached photo with the connector.
It isn't super clear but it looks like the connector you sent a picture of is in the background behind the camera connection. I can tell this wiring harness won't fit either of the connectors from your photo. Let me know what you find.
Continue Researching
- Search Results: bed mat
- Shop: Camper Tie-Downs
- Shop: DeeZee Custom-Fit Truck Bed Mat
- Video: Let’s Check Out the TorkLift Tie Downs
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Q&A: Front and Rear Frame Tie Downs for 2023 Ram 3500 Camper Shell
- Q&A: TorkLift Camper Tie Downs For 2024 Ram 3500 Crew Cab Long Bed
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long
- Shop: HappiJac Manual Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs
- Shop: HappiJac Electric Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs
- Shop: Guardian Comfort Custom Truck Bed Mat - Bed Floor Cover for Trucks with Bare Beds or Spray-In Liners
- Shop: TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long
- Shop: Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems - Qty 2
- Video: Review of Furrion RV Camera System - Backup Camera - FR57AD
- Video: What to Know About the Furrion Vision S+ Wireless RV Backup System
- Video: No Blind Spots, No Surprises: Furrion Explains Their RV Observation System
- Q&A: How Do I Mount the Back Up Camera for the Furrion Vision S+?
- Search Results: dually brackets
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: suspension enhancement
- Video: All You Need to Know About the Firestone Ride-Rite Air Helper Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


Sam
11/30/2025
Hey Robin, thanks for the reply. I'm on the road today, but pretty sure the dual connector in the photos is the only connection for the tailgate camera. I don't recall a skinny wire like in that Brandmotion pic. I uploaded my photo to chatGPT. No idea if it's right, but it says the connector is a proprietary RAM/Mopar tailgate camera harness connection. Here's what it says about the two connectors: 1) White round coax connector (left)....is the OEM composite video feed from the tailgate camera. It carries the actual camera image signal to the radio. 2) Black rectangular multi-pin plug (right) carries: • camera power • ground • CAN / logic signals • camera “present” detection • video reference ground Does that help?