See what our Experts say about this Yakima Accessories and Parts

• Best Track System for a Roof Rack on a NuCamp T@G Camper
  Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part # Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks part # Y01618 . This has the tracks, bases, towers and bars for a complete set up. Happy Camping!!
  view full answer...
• Can Roof Rack Tracks be Installed on A.R.E. Truck Cap
  Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch # Y01126, 54 inch # Y01127, and 60 inch # Y01135 lengths. These tracks are specifically designed for camper shells or truck caps like yours. To complete the setup you will just need the Landing Pad 1 # Y00221 (for which you will need a quantity of 2), 4 of the Yakima Control Tower part # Y8890027, and a set...
  view full answer...
  
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Recommended Roof Rack for a 2021 Kia Sedona w/a Naked Roof
  Hey Amy! Since you do not have roof rails on your 2021 Kia Sedona you'll need to use one of our universal roof racks. I recommend the 48" Long SeaSucker Monkey Bars Roof Rack item # 298-SX6000B. These crossbars attach to the roof of your van with heavy duty suction cups like the kind you see glass installers use. They have a pull strength of 1,260 lbs so they are not going anywhere. The SeaSucker Roof Rack item # 298-SX6000B includes two 48" long round bars that have a 150 lbs capacity....
  view full answer...
• Can Yakima Tracks Be Installed On The Roof Of A Toyota Tacoma?
  Hi Sofia! Yakima Tracks for Roof Racks can definitely be installed on the roof of your Tacoma. Well, as long as you have over 54" of roof to work with, so I do recommend measuring your roof to make sure you have enough room. The Yakima 54" Tracks for Roof Racks # Y26RR is intended for fiberglass though, so you would also need to grab the PlusNut Hardware Kit for Yakima Roof Rack Tracks - 42" or 54" # Y8880039 for it to be mounted (this creates a better seal on metal surfaces). The Yakima...
  view full answer...
• Which Length For Yakima Tracks on Chrysler Pacifica
  Hi LK, I think the best way to go for your Chrysler Pacifica is to use the Yakima 54" Tracks for Roof Racks # Y01127. I really can't see a reason why you'd need anymore crossbar spread than that, so you may as well have the tracks take up the least amount of space. Then to mount your JetStream Crossbars # Y00425 you'll need the TrackTowers for Yakima Crossbars # Y52AV.
  view full answer...
• Roof Rack for 2000 Chevrolet Astro Van With Naked Roof
  Hi Alex; for your 2000 Chevy Astro I recommend the Yakima 54" Tracks for Roof Racks # Y01127. This uses PlusNuts for installation which will not require removing the headliner. For the complete roof rack you will also need two sets of Landing Pad 1 # Y00221, SkyLine Towers for Yakima Crossbars # Y53TR, and crossbars like the Yakima CoreBar Crossbars - 60" Long # Y00422. Based on other roof racks for the Astro with raised rails 60" will be an appropriate length for crossbars.
  view full answer...
• Availability Of Round Bar Roof Rack For 2015 Chrysler Town And Country
  Hello Jeff, thanks for reaching out. I am sorry to say that Yakima does not offer any fits for the 2015 Chrysler Town and Country, so there would be no way to attach the Yakima round crossbars. Actually, not a single one of our roof rack manufacturers makes anything for your vehicle. What I would recommend here is getting a kayak carrier that is compatible with the Chrysler factory crossbars. Something like the etrailer Kayak Carrier w/ Tie-Downs # e98878. This can carry really any kayak...
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks
  Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
  view full answer...
• Ladder Rack for a Leer Camper Shell on a 2007 Toyota Tundra
  We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac # TH29200XT. This rack includes everything so it is ready to install. The load stops are also included. The bars are 65 inches long and the capacity is limited to the capacity of your Leer camper shell. If you would rather have a rack that is adjustable front to back then you can use Rhino-Rack roof rack # Y01-120-NTB with 54 inch long bars but...
  view full answer...
  
• Comparing 54 Yakima Tracks for Roof Racks
  The correct 54" Yakima Tracks for a Camper Shell is part # Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part # Y01127 and part # Y64MR are for metal roofs and ladder racks respectively. Since you have a fiberglass camper shell you don't need the version that comes with hardware for metal roofs and since you'll be installing the tracks on the roof of a camper shell you likely won't be using a ladder rack system which mounts to the tracks.
  view full answer...
• Can the Yakima 60 Track System Be Installed On Naked Roof Vehicles?
  You can use either the Yakima 54" tracks # Y01127 or 60" tracks # Y01135 on naked roofs without needing to remove the headliner, and as long as you're careful, you won't damage the headliner during installation. It should be noted that the 60" tracks are usually too long for most vehicles with naked roofs, which is why the title is so vague. The Yakima 54" kit comes with the PlusNut Hardware but to install the 60" tracks on a naked roof you would need to purchase a PlusNut Hardware kit...
  view full answer...
• Will Thule UpRide Bike Rack Fit T-Slot of Rhino-Rack Vortex Crossbars for Track Mount System
  Yes, the Thule UpRide # TH599000 will fit the T-Slot channels of the Rhino-Rack Vortex crossbars. The Rhino-Rack tracks don't have extra end caps available but I do have another solution for you. I confirmed this with my contact at Rhino-Rack. The Yakima tracks, similar to the Rhino-Rack tracks, do have replacement end caps that will allow you to easily do what you are wanting to do. The Yakima tracks come in 3 different lengths; 42" # Y01126, 54" # Y01127, and 60" # Y01135. You will just...
  view full answer...
  
• Temporary Roof Rack Solution Using Tracks on Bed Rails of 2012 Honda Ridgeline with OEM Tonneau
  There isn't a roof rack option specifically designed to mount on top of your bed rails and work together with the OEM tonneau cover on your 2012 Honda Ridgeline, so the closest option I have for you is going to be a Yakima Custom Install Roof Rack. To accomplish this, you'll need a set of SkyLine Towers (qty 4) # Y53TR, a pair of CoreBar Crossbars # Y00422, four total landing pads # Y00221 (sold in pairs), and 54 inch Tracks # Y01127. The Yakima Tracks, # Y01127, are designed for sheet...
  view full answer...
  
• Yakima Roof Rack Recommendation for Mounting Solat Panel
  If they are using Anchor Plates like part # Y8810074 directly to their solar panel then I'm not sure. I would imagine that it has to do with the design of the solar panel. These anchor plates were made specifically for Yakima complete roof rack systems like the HardTop SL Roof Rack # Y01618. This system uses the CoreBar (which doesn't have channels) so if you are able to mount your solar panel in a crossbar that has a T-Slot you can use parts # Y01127 and # Y00426-482104 instead.
  view full answer...
• Replacement Hardware for Yakima 60" Roof Rack Tracks
  The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039. For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.
  view full answer...
• Camper Shell Roof Rack Track System For ARE Z Camper Shell To Mount Roof Top Tent
  I recommend Yakima HardTop SL Roof Rack part # Y01618 that includes the track, feet and cross bars for your camper shell. This roof rack is the highest capacity available for a camper shell at 220 lbs, so as long as you do not exceed that you shouldn't have any issues with a roof top tent. You could then use Yakima SkyRise part # Y07437. If you just want the tracks for now, I recommend Yakima 54" Tracks for Roof Racks part # Y01127.
  view full answer...
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• What are the Replacement PlusNuts for the Yakima Roof Rack Tracks Made From
  The Yakima PlusNuts replacement part # Y8880039 is the optional hardware kit for Yakima roof rack tracks # Y01126 (42 inch) and # Y01127(54 inch) and are made out of steel. The roof-rack tracks are an anodized aluminum so you wouldn't have any issues using other types of metals.
  view full answer...
• Can Yakima Tracks Work on Truck Cap and Roof
  You can add the Yakima Tracks for Roof Racks, which come in 60" # Y01135, 54" # Y01127 or 42" # Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck. If there is a space between them you wouldn't want to install just the two tracks per side as that wouldn't be fully secure. As for the rivets showing, they won't specifically, but the CapNuts in the hardware would show because you need to drill through...
  view full answer...
  
• Do I Need To Add Support Inside The Camper Shell On My Tacoma When Adding The Yakima Tracks?
  You can use the Yakima 54" Tracks for Roof Racks # Y01127 without adding anything underneath. As far as protection, there is a plastic piece that will go in between the rail and the roof, so you don't have to worry about it damaging your roof. As far as support, that's all up to you. These tracks are made for the cab of your truck, if you plan on putting it on your camper shell, figure out what material the roof is made of. If it's metal, I don't recommend adding any additional support....
  view full answer...
• What Drill-On Roof Rack will Fit My 2022 Chevy Equinox?
  I have an answer for you. Unfortunately, if you are looking to drill into your roof to install a roof rack on your 2022 Chevrolet Equinox, we do not have anything that we have tested as far as a drill-on solution for your bare roof. With that being said, the best solution is the Yakima 54" Tracks for Roof Racks # Y01127 along with 4 of the Yakima Control Tower - Qty. 1 # Y8890027 and two sets of the Landing Pad 1 # Y00221 (Qty. 2). With these components, you will be able to attach Yakima...
  view full answer...
• Flexible Track Rack System for Curved Roof
  You will be able to mount the tracks of the Yakima 42" Tracks for Roof Racks # Y01127 on your 1939 Ford Sedan and still be able to move the crossbars around in order to adjust the spacing during crossbar mounting. The tracks are made of a light weight aluminum that can be bent enough to match the contour of your roof. To make a complete roof rack system, you will need two pair of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and 2 round bars like the...
  view full answer...

Do you have a question about this Accessories and Part?