Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fits most cars, trucks and vans. Installs in seconds and extends out 17" for maximum towing vision. Includes non-scratch mounting pads.
Features:
Note: Does not work with doors that have plastic body molding at the bottom of the door.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, on our 2010 Chevrolet Traverse, we'll be doing a test fit on the CIPA Deluxe Door Mount Towing Mirror, part number 11650. It offers a wide field of view. It's going to allow us to safely and easily change lanes, pass, park, or even back up, while towing a trailer. The mirror can be rotated to the left or right. It can be adjusted to most angles. By loosening up the twin knobs here, it will allow us to extend our mirror out to better suit our towing needs.
Once we've got it set, we just tighten it back down. By loosening up this knob down here, it's going to allow us to adjust the angle of our platform so it doesn't obstruct our factory mirror. It's not going to interfere with the operation of our factory mirror, though we will not be able to rotate our mirror in. It's also not going to interfere with the use of our window. The mirror size is 8 inches long by 5 inches wide. It comes in a quantity of 1 and is reversible, so if you'd like to pick up a second one for the other side, just use the same part number. I'm here at the passenger side of my Chevrolet Traverse, and I just want to point out that even though it looks like a complicated installation, it's actually very, very simple.
The top of the platform here simply clips onto our windowsill. Then, the belt comes down. We've got this adjustment piece that we can adjust to contour our door. It's got a pad here, so it won't harm the finish of our vehicle. The belt continues down here, hooks onto the bottom of our door.
That, too, is padded, so it doesn't scratch the finish. Then, once we have both of those in place, we make our way back up the belt. We come up to our key, and then we tighten it down, and it holds it in place. Then, we're ready to tow. When we're done towing, and we want to release the tension on our towing mirror, we come up to this tab right here. We push down, and it releases the tension.
Then, we can take it off. That's going to complete our test fit on the CIPA Deluxe Door Mount Towing Mirror, part number 11650, on our 2010 Chevrolet Traverse.
worked great, fast shipping
very quick thank youlooks very good .I hope it holds up.
Mirrors went together quick. Very easy to install. Excellent product.
Fit my 2010 Tacoma 4 dr perfectly.
Product arived on time and works just loike I was told it would.
The product is better than advertized!! Fits great and looks good. Thanks a lot.
I was very pleased with how easy it was to get what I needed and
the time it took in which to receive the merchandise.
Was easy to install . Will be a big plus pulling a camper behind my midsole Nissan pickup truck
I used my mirrors the day they came in the mail and they did everything that the product description had online. I am very pleased with the mirrors, the fit is good, simple to install, and I get a excellant rear view of my trailer.
It was about the only product I found that would work with my Dodge Dakota truck. I needed it to see around an enclosed snowmobile trailer. It would be nice if the ratchet mechanism was on the other side that way if you only want one on the drivers side door you would be to put the mirror assembly closer to the truck mirror.
Great got them for 2011 Jeep Grand Cherokee Overland
5 Star
took 10 minutes to put these together and put them on my honda pilot..they work great....i can see behind me and feel a lot safer towing.
The mirrors were easy to install. The mirrors adjust up and down on a swivel as well and in and out. They are stable at higher speeds and on bad roads. Very good product.
Pretty good product. I mounted on my 06 Tundra. No matter how tight I get the strap, it seems to remain a little loose until I partially roll up the window. Other than that small problem, I think theses mirrors will work out great. They were easy to install an I would reccomend them if for no other reason that they are pretty universal for any vehichle. I plan to use them on my Ford F150 too.
easy to install & adjustvery good item, easy install, no shake or vibration and no movement, even after 4500+ miles of all kinds of weather. Only wish they had a left & a right model ( the ratchet handle was a bit hard to adjust on the drivers side as it was against the car mirror)
I tried different mirror mounts for my Toyota Tundra so I could see behind my 20 ft travel trailer and have found this product to be the best that I have ever seen.
I like the big mirror and I like the extra length that pulls out so you can see behind the travel trailer. Etrailer.com has excellent service and I received my package on time.
Thank you etrailer.com!
Don C.
KS
Took them out of the box and had them on and adjusted in 5 minutes. I kept them on to show them to my wife then in 15 seconds removed them. We have a Toyota 4runner and needed to see around our 23ft trailer and we can. Haven't road tested yet but not worried as they locked down tight when I set them up. Much better product then the kind you fit onto your existing mirrors. JB
I installed these mirrors as well as Cipa 5" spot mirrors for towing a travel trailer with my Jeep Liberty CRD. Setup was pretty straight forward. Because I was also attaching the spot mirrors, I bought a longer bolt to hold the mirror head to the arm. I was not comfortable with the amount of threads after going through additional brackets.
Going down the road, vibration was minimal and I felt 100% confident in the setup. I had no problems passing other vehicles and merging in traffic.
2 things keep this from being a 5 star product. 1st, tightening the strap on the drivers side is a bit hard because the T-handle is not reversible. The OEM mirror is in the way. Luckily, on my Jeep, the mirror also folds forward to make it a little easier to get to. I would suggest that Cipa use a removable T-handle with a 1/4" square on either end of the assemble so that you can tighten from either side, or use a 1/4" ratchet if you misplace the T-handle.
The other thing that keeps this from 5 stars is the mirror head. I feel that it is cheaply made. I notice when adjusting, the bottom of the mirror head would flex where the bolt threads into the head. I found that to adjust the mirror head vertically, I would have to cup the back of the mirror, holding both the top and bottom, as not to flex the head.
All in all, this is a great product, and after the initial setup and adjustment, these mirrors come on and off in minutes.
I mounted the mirror on the passenger side of my 1978 3/4 ton Chevy pickup. The mirror mounted easily, did not even need to read the instructions.
Tomorrow will be the real test when I drive 11 miles into town, fill my water tank, and return home. I am concerned that the hand tight bolts and screws will not withstand 11 miles over a dirt road and I will have to stop often and readjust them or they will vibrate out. Either way tomorrow is the big test.
I give this product 5 Stars.
I mounted these on my 2019 Jeep Wrangler Unlimited Sport. I have an 8.5 foot wide enclosed snowmobile trailer that I need to haul. I have no rear view with the stock mirrors. These mirrors provide excellent rear view on both sides of my vehicle. They are very easy to mount, are very solid, and cause no damage. I highly recommend this product.
Very well made product; simple design and is sturdy. No shaking or vibration experenced. Used on 2014 Toyota Tacoma Crew Cab. Very pleased with this purchase, towing an 18' car hauler. Now for the negatives: extremely poor instructions; installs best with two people; suggest a list of tools be added, i.e. pliers. Strap tightening device works, but I could not operate it bare-handed. Mirror tightening system not very user friendly. All bolts should be hexhead, not plastic knobs.
2006 Toyota Sequoia SR5.
The mirrors install easily and extend far enough to give us a good view of our 27 foot travel trailer. They have a good field of view and gave us plenty of confidence in lane changes, turns, and backing. Do be aware that when the straps get wet they get loose, so tighten them when it rains.
My only complaints are:
1. They do shimmy a bit at speed - not enough to be a hazzard but it is something of which you should be aware.
2. Over time the shimmy does move them out of position, so you will need to reposition them and check them at least once a day. One kept turning inward, the other kept pointing down.
All that being said, however, there are precious few options for vehicles of this type, and having tried others I do have to say these are the best.
etrailer was great, received fast delivery. The product was fine except not a very good fit for my Toyota FJ due to the door curvature. Would work it's way loose when driving.
Mirrors work well fit my 2015 Toyota Highlander. Makes towing my Travel Trailor much easier. Would give 5 stars if a little easier to adjust. Have travelled about 2000 miles with them.
Just received my two side mirrors, and installed them on my 1938 1-1/2 ton Chevrolet stake truck. Great quality, easy to install, and they now allow me to see around the side of the truck. Thanks for offering such a great product.
Do you have a question about this Mirror?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard L.
8/8/2018
Have been using the mirror as described above for a year now. once in a while I do have to readjust the mirror due to the rough roads but other than that it works great.