Best Fitting Extended Mirror for My 2002 Toyota Tundra  

I have a similar slip-on towing mirror that is a fit for your 2004 Toyota Tundra, but it's not the part #11501 which is designed for Ford trucks. Instead you would want the Longview mirror part #CTM4000 which is a confirmed fit.

According to Longview Towing Mirrors, their #CTM4000 will fit 2001-2007 Toyota Sequoia models with the manual, electric or heated mirrors. I have confirmed this via a phone conversation with my Longview representative. I have linked you to a product…

Currently the only option in a custom-fit towing mirror for your 2006 Toyota Tundra with heated electric OEM mirrors is the Longview #CTM4000 which is indeed a slip-on type. Your other option will be a universal-fit towing mirror. The link at right…

Since the Hopkins 7 and 4-Way trailer connector #HM40975-11998 includes a hardwire harness it technically could be installed on any vehicle, including your 2002 Toyota Tundra with a 4-Way connector. But you will need to do some hardwiring and extra…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…