Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re parked and moving around inside, there’s nothing worse than feeling your trailer sway or bounce. Each of these scissor jacks supports up to 7,500 lbs, giving your setup 30,000 lbs of total support when all four are in place. Once dropped, they keep everything steady and solid so you can walk around without the shake.
Uneven ground is part of the deal at most campsites. These jacks adjust from 5" all the way up to 29", giving you plenty of range to level things out. The wide bow-tie bases spread the load and stay steady even on soft or loose soil, so you can set up anywhere without sinking or slipping.
Whether you like turning a handle or prefer to let your drill do the work, this kit does both. Each jack comes with a manual crank handle plus a drill bit adapter that fits right into your power drill. It makes raising and lowering smooth and fast—handy when you’re setting up solo or beating bad weather.
Rain, dust, and road salt can take a toll on gear that lives under your trailer. These steel jacks are finished with a black powder coating that resists corrosion, while the screws and hardware are zinc-plated for extra protection. With a little care to keep them clean and dry, they’ll stay tough through many seasons of use.
Different trailer frames call for different mounting options. The six-hole top plates give you flexibility when bolting the jacks on so you can line things up without drilling new holes in awkward spots. Once mounted, they’re ready to drop down whenever you need extra support at camp or in storage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these etrailer Scissor Stabilizer Jacks. Now these compact user-friendly scissor jacks are going to be a must-have to keep on your RV, your fifth wheel, your travel horse or cargo trailer, and they're going to keep those trailers level and stable. So if you are walking around inside of your trailer, you're not gonna have to worry about the trailer bouncing around or rocking back and forth when you have these installed and in use. Now these are going to adjust from five inches when they're fully collapsed as I have them here, all the way up to 29 inches when they're fully extended.
So they're gonna give you a total lift of 24 inches. And the support capacity of each jack is 7,500 pounds, giving you a total capacity of 30,000 pounds. Now these do include two of these crank handles. And giving you a closeup here of the two that I have on the center of my table here. The bearing set on the crank side is going to extend the life of the of each jack.
And I just kind of want to give you a brief demonstration of how easy these are going to be to use. So I'm just gonna include, or insert the handle there. And as you can see, these are going to extend and collapse very easily. So these do come lubricated and then you'll just keep them lubricated with grease. I believe lifting grease is what you're going to want to use.
And so you're gonna get two of these crank handles, as I mentioned. And these also come with two drill bit attachment sockets. That's going to make it even easier to operate these jacks with a power drill. So if you want to extend these or collapse these even faster than the crane candle, I think it's really a great inclusion that includes these drill bits. So you can use your power drill to easily extend or collapse these.
Now the bottom here have bow tie bases that are gonna keep these jacks steady, even on soft surfaces. And then flipping this over here, the holes here on the top plates are going to allow for adjustability when mounting. And as you can see, you are going to get the mounting screws there included with this, you see them here on my table here. The screws are zinc plated, so they're gonna resist corrosion. The hardware is built to last. And these jacks do have a black powder coat finish that's going to help resist corrosion and rust. And so with this, you are going to get four stabilizer jacks. But if you don't need four, the good news is do have some other quantities available as well. We do provide these as a set of two, and then also just one if you just maybe need to replace one. We do have that option available here as well. So if you're looking for the set of two or just the one, I am including the model numbers that you see there on your screen. You can just take the number of the set that you're looking for, pop it in the search field of our website, and that will take you to the quantity that you're looking for. These do have a limited lifetime warranty. And I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Very quick shipment. Good price and excellent product.
Product is what was expected
Stabilizers were as advertised
Great product and delivered very quickl y.
Good quality, easy install
Very sturdy jacks. Packaged well. I didn't see a template for the holes that were referenced in the instructions, otherwise everything was perfect.
Heavy duty
I replaced my RV's old stabilizer jack with these and now it will be easier to set up and leave a camp site and the drill adapters may it 100% quicker. this is the third produce i have bout from you for my RV and i LOVE THEM and price is great!!!
Direct replacement for my RV jacks. Bolt pattern was a perfect match.
They did what the doctor ordered. The install was smooth and the provided screws worked well after predrilling holes on the frame. Even comes with an attachment bit for your drill, for easy operation.
These are sturdy jacks! I was able to install them on my 2022 Apex Nano 213RDS with no major problems. These jacks are a great value, well made, substantial capacity, and user installable.
The jacks were easy to install and very easy to operate.
The scissor jacks are great quality; however, they don’t fit my 2019 Forest River Rockwood Minilite travel trailer. The Bolt patterns don’t match up which will require some sort of adapter that requires fabrication. Check your bolt patterns close before purchasing.
These replaced one that was bent, not sure of the rating but I think they were #2500 or so. I went with these because they had the #7500 capacity. So anyway, I replaced the front two jacks and added two in front of the axles about mid point in my camper. This setup is very stable now and I plan on getting two more of these to replace the electric stabilizer in the back, because those never put down enough pressure to be effective. Highly recommend.
Much stronger that original stabilizers… should be all we need
The jacks themselves are fine but the mounting screws might as well been made from aluminum. The threads are very small for that size of screw and the threads stripped on the way in. Had to buy proper screws from a hardware store.
I should have installed these the day I bought the used trailer…although these are over designed for the weight of my trailer the price was better. No more crawling under and fighting manual screw jacks…
I ordered heavier duty rated jacks older jacks were borderline rated had welding buddy cut off old jacks and weld new jacks on frame fit perfect
Would recommend these jacks
Thx for prompt shipping excellent product
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael F.
4/13/2026
Still doing a great job