Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting a camper on or off its base doesn’t have to be a backbreaker. This pair of cable jacks gives you a lifting range from 17" to 57", using simple hand winches with a 3:1 gear ratio for controlled motion. The aircraft-grade cables and safety latches keep everything steady, so you can raise or lower with confidence and no free-spooling surprises.
No need to bolt anything permanently or haul bulky gear around. Each jack breaks down into three pieces, so when the job’s done, they fit in a small space in your garage or storage unit. The tripod bases and upright poles come apart quickly and go back together just as easily the next time you need them.
When you’re lifting and lowering heavy gear, stability matters most. These jacks spread weight evenly with sturdy tripod bases and large footplates that help prevent sinking or tilting on soft ground. The L-shaped lift brackets grab under the sides of your load to keep everything balanced from front to back and side to side.
Rain, dirt, and time won’t take these down easily. The upright poles are galvanized, while the tripod bases and lift brackets are finished in black powder coat for corrosion resistance. That tough finish keeps your jacks looking good and working right after seasons of use outdoors.
With a combined weight capacity of 1,000 lbs, these jacks handle smaller campers and similar loads without strain. They’re strong enough to lift, stabilize, or hold your setup in place during loading and unloading—no need to rely on extra hands or improvised supports.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Works as advertised easy out of the box set up would recommend
fine jack - smooth operation, balances toppers readily (may seem tipsy, but they remain well supported).
One recommendation - suggest developing a right and left oriented jack, specifically have round cable pulley wheel on different sides. Currently the pulley wheel gets very close/can rub side truck side beds on one side.
Best price on the internet... that I could find! Great directions, assembly was painless, worked perfectly. My son bought an old 70's metal framed camper shell that was at b*tch for 4 grown men to lift. I figure it weighs 500+ lbs, maybe 600+. These jacks worked absolutely perfectly. Lowered the camper onto saw horses, and I'm sure it will be just as painless to remount that beast. Thanks etrailer!
Easy to assemble, the base was not damaged good condition. Should work great for my home built camper 850 lbs
We bought the jacks to remove our camper shell. The “L” shaped supports for lifting the camper shell were a little small for a camper shell so we had the kid across the street weld on a piece of steel to extend it in order to lift the camper shell. Works great and we’re happy with the jacks. Eric.
Bought them because they’re cheep. Sketchy to use and very scary when lifting all the way up to get the truck under. Had one scare when the winch lock failed to snap over when lowering camper and the jack slipped a couple inches before the latch caught. Ended up buying a $xxxx set of Rieco-Titan that I should have bought in the first place. I probably just use the for the truck cap only.
Good durable product except when the shipping gorillas get a hold of these!
Bought the jacks to use for installation and removal of my Leer truck topper. It did a good job! Item was shipped quickly. Excellent service.
What was really great, was that I had placed my order and etrailer notified me that it had been shipped! I was greatly pleased with how fast they handled my order. Tracking was easy and delivered on schedule. The jacks are first class and do just what I need. Easy to assemble even without looking at the instructions. One minor complaint is the way the crank handle is shipped. The plastic sleeve on the handle part gets sliced so that when you grab hold of it, you notice a definite sharp edge. Some sanding took care of that issue.
Overall, I give etrailer a thumbs up. I know where to go for future purchases. Great value prices and fast shipping. Thanks to all involved!
I have a small slide-in camper that is about 750lbs for my Nissan Frontier and these jacks work great. I previously had the larger jacks, so moving to the 1000lb ones was a little bit of an adjustment since they have a smaller base and platform to hold the camper, but the ratcheting mechanisms have a safety on them and are very solid. Other retailers sell the poles and jacks separately, and I appreciate that ETrailer bundled them together.
Will share a photo when I get the chance.
Carol , I cannot tell you how completely dissatisfied I am with the brophy jack stands ! I had two buckle and fail dropping my newly restored camper on its side . It is totally ruined . I had over two years in the restoration process and a couple of thousand dollars in materials . This does not count the xxx or so for the jack stands . I am devastated 1 As you can see I was staged on a concrete pad so it was definitely not a footing issue . I would certainly appreciate a refund for the jack stands . That camper will be several thousands of dollars to replace .
Is not designed for a simple camper top. The lift brackets are only angle iron and don't reach beyond the truck sides. Had to use 2x6 boards to make it work. Only works with tops that "hang over" the truck sides.
Thomas M.
1/8/2022
These camper jacks have brackets that are 2 inches wide and 2 inches tall for your camper shell to sit on.
I bought these jacks to lift and store a pick up cap (some call them toppers) in my yard. Combined with 2 saw horses and a few 2 x 4s these jacks worked great. Since they were used outdoors in a New England winter I covered them with large plastic garbage bags and then 5 gallon buckets over the bags to keep them from blowing away. The jacks fared very well and the only rust that appeared were on the feet where I'd expect it. I would recommend these jacks for those looking to utilize them in similar applications. They are well made and sturdy.
Robert
9/11/2020
Excellent!
works well as described!
Good, reliable, togh and rust resistant materials. Two thumbs up!
Great product! I was not looking forward to paying $2G for the standard jacks, then having to bolt them onto the camper. Simple, yet effective! Brophy cable camper jacks are absolutely perfect for the camper I have.
Brian
10/9/2023
Still very happy with my Brophy cable camper jacks.
Mike L.
10/25/2023
My husband is thrilled with the truck camper jacks. And the price is great too. Thank you.
Dawn
11/19/2024
Great! My husband has the camper on and off the truck with ease. The camper sits and waits till he loads it back on the truck. So glad we were recommended to contact you.
Sturdy and well made product.
The cable camper jacks work great for my application.
Brooke M.
4/27/2025
Boom! Glad to hear it :)
Ok so I have yet to use them yet but I wanted to put in my two cents. First off using a double walled cardboard box to ship these heavy jacks/ winches in has got to be the worst mistake this company would make. I get cutting costs but when almost every review mentions this you’d think they would correct it. In turn the paint is gone in multiple places. When the box got to me the UPS driver didn’t think I was going to accept it. I did and the product seems to work. I wish the plates were wider but it should do the job when I need to use it.
These jacks are very well built and are strong enough for the job. I can't say how they will work for a large camper. I removed a shell, which required some creativity because the tripods are in front of the wheels, and impossible to drive the truck out from underneath. See pictures, they are worth a million words.
Victoria H.
2/20/2025
Thank you for including all of the photos, Dan! You made it look easy! I once had to help remove the camper shell off my step-dads pick up, and it took four of us to complete the job. Are you permanently removing the shell, or just for the season?
Works great for my home built truck cam per.
Gwendolyn Y.
7/21/2025
Your truck camper looks great, Bryan! How long did it take for you to build it?
it is a really nice set up. easy to use and keeps the weight of my truck i am happy with this purchase i used to struggle putting my camping tent over the ladder rack now with no effort at all i am able to load my camper with the tent attached to it .
It worked well a little wobbly need to be on flat surface., maybe a wider angle iron on lifting contact with camper. Used only once . Well built. Lifted off my truck and set on my utility trailer
Nick S.
12/29/2025
That is great to hear, looks nice on the setup. What kind of truck are you using that camper with?
Beefy product. Well worth the money, even if just to save yourself the hassle and embarrassment of rounding up 6 friends to help you unload a slide in. You’ll probably spend the price of the jacks on beer and pizza alone…then you’ll have to do it all over when you want to upload it again.
I was able to unload my old truck camper into a storage unit. The jacks are compact with plenty of room on either side of the camper to work within a 10ft space. Rotated side to side, lifting and then lowering the camper on my own and with no strain. Good product.
Lazer S.
12/2/2025
Glad it's working well for you, Tony! Hopefully they didn't hurt your beer and pizza fund too much! : P Are going to be doing any restoration top your camper? Has a pretty cool vintage patina as it is, but always curious when I see older stuff like this. Also, is that a C10 or C20?
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Cjones
9/11/2018
I have had this product a year now and it is still working great.