etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
This item does not fit your vehicle
2023 Lexus RX 350h
These items fit your vehicle
2023 Lexus RX 350h
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Add towing and cargo capability to your vehicle with this Class III hitch receiver. It has a 2" x 2" opening that works with standard ball mounts, bike racks, and cargo carriers, so you can tow small trailers or load up gear for weekend trips. With a maximum gross trailer weight of 4,000 lbs and maximum tongue weight of 400 lbs (5,000 lbs GTW and 500 lbs TW when used with weight distribution), it covers most light-duty towing jobs without breaking a sweat.
This hitch uses precision, robotic welding to create solid, consistent joints that hold up under stress. The sturdy square-tube design spreads the load evenly along the frame for strength and stability whether you’re towing or carrying accessories. There’s no flex or rattle when it’s properly installed, so you can drive confidently knowing the hitch is secure.
The matte black powder coat finish gives this hitch a clean, carbide-like look while protecting it from rust and corrosion. It hides scuffs, dirt, and dings better than glossy paint so it stays looking new even after plenty of use. The finish also matches well with most trim styles for a low-key, purposeful appearance under the bumper.
Installation doesn’t require welding or drilling—just bolt it to the frame using your vehicle’s existing hardware. The holes line up precisely for an accurate fit that makes DIY installation straightforward. Once tightened to spec, the hitch sits flush and ready for towing or mounting your favorite rack.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Easy install on 2013 Dodge Grand Caravan. No drilling required. 5-bolt installation. 3 exhaust hanger bolts removed as well.
An impact wrench and air ratchet sped up installation.
One person can do this in 30 minutes with the right tools.
Install was pretty easy everything worked out great.
Heavy duty, nice quality. I only had to undo the rubber hanger on muffler to install on my 13' Town and country.
This is the 3rd or 4th time I have purchased a hitch and wiring from etrailer. I have never been disappointed by this company!
Yesterday I installed the hitch and wiring on my 2019 Dodge Grand Caravan GT. The hitch took a few more minutes than anticipated, only because the exhaust system resonator was in the way, more than expected. A minor delay.
Running the power wire to the battery always takes the most amount of time, if you do not have a lift. I just move slowly and tie-wrap it in several places so I know it will remain out of the way.
Len M.
7/11/2020
Still works great! Not a single problem.
I should've checked here first, Amazon not only didn't deliver on time, they damaged the hitch in transit, sent it back to the seller before it even arrived and still hasn't credited my card, was in a pinch so found etrailer had the hitch I needed, it was cheaper, arrived on time and customer service kept me informed the entire time, they'll have all my business for towing supplies in the future
Gwendolyn Y.
7/11/2025
I hope you get your credit back soon, Terry. That sounds like a hassle to have to deal with. Glad that we had just the hitch for ya. What are you going to be using the hitch for?
NICE PROCDUCT, LOOKS GOOD INSTALLED
Great price, great packaging and shipping, fit perfect, all needed hardware included. Works great.
Thomas
10/30/2025
still great.
Using it on my dodge caravan minivan with the swing away hitch and tire carrier. Good quality product and would recommend it to others. And Courtney helped me pick out everything I would need for my project. I’ve been shopping at etrailer now for 20 years and they are the best!
2016 Chrysler Town & Country van.
Fairly easy installation. Only 5 bolts for the hitch itself, 3 bolts to displace the exhaust/muffler. It's better if you have a 2nd person to help lift it into place, but I managed to get it close enough with 2 standing 5 gallon buckets and a 2 X 4 board piece. I jacked up the back of the van and placed on hack stands. A breaker bar or impact wrench is highly recommended. Get some cardboard boxes to lay on the ground which makes it easier for you to slide around on. I plan on using this for a hitch carrier, and once I add the towing wiring, I can use it for a Harbor Freight utility trailer. Customer service was great, received hitch sooner than expected.
When hitch for my 2014 T&C got to me the box was torn up so I thought there might be damage. Nope it was just fine. Very very well built, nice welds, great craftsmanship. The mat black finish is really nice looking and it look like it will hold up well. The hitch fit up under the van really well all you can see of it is the 2 inch receiver. NICE! Thanks for an inexpensive, well built, nice looking hitch!
I have purchased several trailer hitches from e trailer. All have been manufactured well and install as per instructions. This one was for my Chrysler minivan and installed perfectly following instructions. Tow hitch barely visible below rear bumper as per picture.
Receiver brackets were deformed and did not align with the factory mounting holes on my van. Had to bend brackets back into alignment. Supposedly this is a common occurrence however there is no mention of checking the alignment of the brackets in the directions or installation video. Wasted my time fighting with it.
How to bend brackets back:
https://www.etrailer.com/faq-my-trailer-hitch-doesnt-fit.aspx
After correcting the alignment, receiver went on easy. Hello extra cargo capacity!
Well made, quality hitch. Perfect fit for our 2019 Dodge Grand Caravan. Arrived quickly and well packaged, despite box being a bit beat up, due to the weight of the hitch. etrailer also wrapped the hitch with packaging, and included instructions. It can be done fairly easily on the ground, depending on how big you are. The hitch bolted up perfectly, using the bolts already installed on the van. Clearance between the hitch and the bumper was perfect, no cutting or bending required with this hitch. Very happy with etrailer,
Hitch arrived quickly and the install went super easy. Install videos you guys have are always helpful. Thank you!
About a year ago I purchased this for my wife’s 2013 Chrysler town and county van so she could haul her and the kids bikes. It was easy to install when following the video and does not rattle or have other issues. I would buy again and found etrailer.com best price and good service at the time. I have not pulled many trailers as the wiring kit and process did not seem easy and at the time was also pricey. I hope to relook at the wiring this year. For bikes. Is excellent
Hitch looks great. Broken rear passenger side nut in the frame rail is slowing installation but it’s common and plenty of videos on how to fix. Wasn’t going to do trail wiring but with everything that has to come apart it’s the best time to do it. Waiting for the wiring from etrailer to finish it
Very well made and easy to install. This is the fourth vehicle that I have installed an etrailer Trailer Hitch Receiver upon. They are high quality, and extremely well designed for each specific vehicle. I have recommended them for friends vehicles multiple times. My primary use has been receivers for bike racks.
The item arrived in a box that was very beat up. When attempting to install it, the right side was bent, causing the holes not to be aligned for the bolts.
Tow bar is good but you sent no bolts now I got to search the hardware store in town for them.i mean come on
Real good hitch.Best service I've ever had
Need a trailer hitch I say only place to get one
This is my second hitch from etrailer.com. I am a return customer because I was satisfied with my first hitch. This one was even easier to install. I put it on in about a 1/2 hour in my drive with out a jack or second person. I will plug in the wiring tomorrow. I remember how easy that was the first time. I am a little OCD and will run the power wires from the battery inside pex tubing under the vehicle just like the first one. There was nothing hard or surprising with this hitch. I am happy, happy, happy!
R.d.
6/2/2022
It is holding up fine. I use it every week.
Amazing as always. Even with a super weird install on this dodge, the etrailer was a breeze to install. Maybe 45 mins. Saved probably 400$
1st off, this was one of the best online buying experiences I've had. I normally use Amazon because the shipping is the quickest. In this instance etrailer had a better price and much better product reviews. I ordered 8am Thursday morning, Friday afternoon I had the receiver installed on our van. Fit great, and incredible shipping. Thank you!
This is the 2nd Trailer Hitch Receiver I have purchased from etrailer. This one for a 2017 Dodge Grand Caravan, the first one a few years back for a 2010 Subaru Forester. I use them for my Thule bike racks. Both were pretty easy to install and ordering from etrailer was very straightforward. I would recommend the company and their products to my friends and family.
Working well. Install was okay. The driver's side arm was bent about 2 inches inward. Had to use a 2x4 between the rear cargo bed to lever the arm to align with the bolt holes. Installation instructions and video were helpful.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dustin
8/26/2025
Ive only used one and I only use it to carry a track for extra family stuff on trips. Worked perfect though and didnt bang the lift door. Love the addition for the family trips!