To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This Class III hitch is built for work, play, and everything in between. With a 675-lb tongue weight and a 4,500-lb maximum gross trailer weight, it’s ready for loaded cargo carriers, multi-bike racks, or small trailers. It even supports up to 675 lbs TW and 5,000 lbs GTW when used with weight distribution. Whether you're carrying electric bikes or towing a lightweight camper, this hitch delivers steady, confident performance trip after trip.
You don’t need a shop full of tools to get this hitch on your vehicle. The fully welded square-tube design bolts directly in place using existing hardware—no drilling or welding needed. It’s a straightforward install you can handle at home, and once it’s on, you’re ready to tow or mount accessories the same day.
Built from powder-coated steel, this hitch stands up to rough weather and tough roads. The matte black finish fights off corrosion and hides scuffs better than glossy coatings, so it keeps looking clean even after seasons of use. Beneath the bumper, the concealed cross tube gives it a tidy look while keeping the receiver easily accessible for gear or trailers.
From weekend trips to daily hauls, this hitch is made to last. The square-tube frame adds strength without extra bulk, giving you reliable towing performance whenever you need it. Its solid construction means you can count on it for years of safe, sturdy use across all your towing and cargo needs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Jesse here with etrailer. Today we'll be taking a look at and I'll show you how to install the TowSmart custom-fit trailer hitch receiver on our 2020 Dodge Grand Caravan. Adding a hitch to the Grand Caravan really makes a ton of sense. These are people movers, so you're gonna have all the seats filled up and there's not a lot of storage space inside the vehicle. So adding this hitch on allows you to add some extra store space to the outside of the vehicle, whether it be something like a cargo carrier or a bike rack, where you can even do some towing with it.
Just remember, if you plan on doing any kind of towing, you will need to get trailer wiring to ensure that you're safe and legal on the road. I like the CURT kit. It seems to work pretty well and it's pretty simple to install. Here's a closer look at our hitch installed on our neighbor's vehicle. The cross tubes are gonna be completely hidden behind the fascia, so all you'll really be able to see is the receiver opening.
That's gonna be your standard two inch by two inch opening, so most of your accessories will fit right in there. And then another standard is the 5/8 inch pinhole. The pin and clip, not included with the hitch. However, we have many options available here at etrailer. Also, any accessory that you add on will most likely come with one included.
And then for towing, we also have a wire type safety cable loop. Very easy to access with whatever style safety cable you have, like an S-style, like this, or even a large Clevis, like this. For some quick measurements, we'll start with our ground clearances. From the ground to the top of the inside of the collar is just at about 13 3/4 inches. Then from the center of our pinhole to the edge of our bumper is a little over four inches.
That's the number you'll want to keep in mind for any folding accessories that you might add on to ensure they don't make contact with the vehicle. As for our weight capacities with this hitch, we have a gross trailer weight of 4,000 pounds. That's the amount of weight that you can pull behind the vehicle. We have a maximum tongue weight of 400 pounds. That's the amount of weight pushing down on the hitch. You do have the option to use weight distribution with this hitch. That'll bump those numbers up quite a bit. If your gross trailer weight goes up to 5,000 pounds, that tongue weight will be 500 pounds. And always be sure to double-check your vehicle's owner's manual, compare those numbers, and go off the lowest-rated component. All in all, if you're looking to add a hitch to your Grand Caravan, I think the TowSmart is a good option for you. If you have any questions or concerns about this hitch or anything else we offer here at etrailer, feel free to reach out to us. We'd be happy to get you pointed in the right direction. When it comes to the installation with this hitch, it's honestly a pretty easy hitch to install, but it does involve getting up under your vehicle, lowering the exhaust, and lifting the weight of the hitch up. So if that's not something that you're looking to do yourself, check out our dealer locator. You can find someone local to you that would be happy to get you set up. If you are looking to see how this gets installed, then follow along and I'll walk you through the process. To begin our installation, we'll need to lower our exhaust to get it out of our way. So I have a 13 millimeter socket. We'll start on our rear hanger here. It's just bolted up with one bolt. (drill whirring) Take that out. We'll follow our exhaust up and remove one more. (drill whirring) Now we have one more hanger, a little bit further up. And when we remove this one, just kind of hold up on your muffler here (drill whirring) and then we can let it rest on our subframe. On the passenger's side frame rail, you'll see three bolts here. We're only going to be removing the back two, so we're gonna skip over that one. This middle one is an 18 millimeter. (drill whirring) And then the one on the back is 15. (drill whirring) Then on the driver's side, we'll be removing all three bolts. I'd recommend grabbing an extra set of hands. I have my friend Daniel here to help me out. We're gonna lift this up into position and reinstall that factory hardware. (metal clacking) As long as we can get one started on both sides, that should hold the weight of the hitch up so we can get the rest of the hardware and stuff. (metal clacking continues) And we'll take our sockets and tighten everything down. (drill whirring) (drill whirring) (drill whirring) (drill whirring) (drill whirring) And now we'll take our torque wrench and torque everything down to the specifications in the instructions. (torque wrench cranking) (torque wrench beeping) All that's left is to hang our exhaust back up. But otherwise, that's gonna do it for our look at and installation of the TowSmart custom-fit trailer hitch receiver on our 2020 Dodge Grand Caravan.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.