To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Class I hitch receiver gives you a solid 1-1/4" x 1-1/4" opening with a 2,000-lb maximum gross trailer weight and 200-lb tongue weight rating. It bolts on using factory mounting points—no welding required—so you can add real towing or accessory capability without altering the vehicle’s structure. The included hardware kit makes it straightforward to install with common tools in a driveway setup.
Built from fully welded steel and finished with a gloss black powder coat over a protective base layer, this hitch is made for light towing and everyday utility. Whether you’re pulling a small trailer, mounting a cargo carrier, or using it for bike racks, the construction delivers solid strength while resisting rust and corrosion for the long haul.
Everything about this hitch is designed to make installation approachable for do-it-yourselfers. The precision, robotic welding ensures the holes line up where they should, saving time and hassle. Clear printed instructions come in the box so you can get it bolted up neatly and confidently on your own terms—no lift or shop visit required.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Great fit and help, Carol was great and knowledgeable.
Everything fit perfect!
Fit perfectly in my 2003 325i wagon
Product was shipped immediately upon order submission. Equipment was exactly as described and worked without flaw.
Great quality product. Took a professional approximately 1.5 hours to install.
Me again. The above pic is for the hitch I installed. Its very good thick metal, took about an hour onto a 2001 bmw, the wifes car.
Fit great on my e46 xiT. Shipped quick. Easy install, just follow directions.
Good small hitch with decent instructio ns.
Ms Sarah took the time to explain very clearly and professionally what I needed.
I have not installed the hitch yet but my order was complete.
Installed on 2000, BMW 323i, Easy installation, very pleased with the product
Very high quality product, with simple instructions; easy to install. The folks at etrailer.com are tops; great service and prices; terrific company.
THIS COMPANY IS GREAT! THEY ANSWER THERE EMAILS RIGHTAWAY,DO ALL THE RESEARCH FOR YOU AND WHEN YOU ARE READY TO ORDER YOU TALK TO A REAL PERSON.GOT MY BMW TRAILER HITCH WHEN THEY SAID I WOULD. THIS HITCH IS HIGH QUALITY.
Super easy to install and great tech help when it came to the wiring harness. If I ever need another hitch I know where I'm going. Thanks so much.
This hitch has made my life so easy, I don't have to shove my dirty mountain bike into the car anymore. The installation was easy and all the parts were provided. I was especially happy with the quick shipping, I got it one day before anticipated date of arrival. I couldn't be happier with this purchase.Thanks guys.
PS: the installation video was a brilliant touch.
I install it my 2000 BMW 323i for my Kawasaki 650SX Standup Jetski. Perfect!!! Everything fit and works as expected.
Very good hitch that's working well! Video helps clarify installation, which was relatively easy overall. I made a template of the hitch mounting holes on heavy paper, so I was able to drill the mounting holes from inside the trunk, since I don't have a lift. ETrailer is a nice, helpful company to deal with ! Will order again !
Perfect fit. Super easy to install. I love it. This is the third hitch I have purchased from you and have never been disappointed.

Randy
3/27/2023
This hitch has been perfect since the day it was installed. i would absolutely buy it again
I've purchased a few hitches from etrailer in the past, and this particular hitch about a year ago. Pricing, quality and shipping are always right on-point, and support is stellar as well. Installed it myself, as I've done with the others, and it was straight-forward, well-instructed, and quick. Hitch is more or less seamless, and allowed us to add a bike-hitch for adventures further away from home. Great company to work with.
This is a good product, for an imperfect towing application. I used my hitch to tow 1-2 bicycles on a Saris bike rack. On the BMW it is difficult to install and remove the rack on account of how recessed the hitch pin is on the trailer mount.
I don't fault the hitch mount for this, rather its simply not a great car to use to haul bicycles, I knew when I installed the rack.
Product, installation instruction, and support from E trailers was very good. Thank you!
My car is a 2003 BMW model 325XI. The installation instructions were followed but the hitch ended up too far forward. This was caused by the brackets (part CM-CP127). I had no choice as to where they were installed and the end result is that the hitch is too far forward. It would have been simple for the bolt holes in the bracket to have been placed about 2" more to the rear. There was not enough clearance for the flat plates (part CM-SP109) on the forward part of the tire well. I had to shim them with washers. My receiver will have to be modified but I still don't know if there will be enough clearance between the bumper and the ball. I m really disappointed.

Anonymous
6/4/2015
I understand your problem, luckily I have not drilled holes yet. The manufacturer should address this issue. I am returning mine.
Nice hitch and very easy to install. No problems, and all the necessary parts were there. Even though it's just a Class 1 hitch, for what I am wanting to pull with it, it will work great, Thanks! ;-)
I have not finished the installation yet, but am pleased at the simplicity and appearance of the receiver. I followed the tracking and it said it would arrive at around 3:30 p.m. on Wednesday and the UPS driver pulled up at 3:28 p.m. I was amazed that it was so accurate. Thanks, I can't wait to have it installed and hook up my trailer and head down the road.
It's a great lightweight hitch to attach my bike rack to. Installation was relatively easy with some drilling into my spare tire well but the instructions were good and the spare tire well has been leak tight for over a year. The hitch is relatively inconspicuous.
Seems well made. The reason I graded this as a 3 star is because I needed to make a couple modifications for it to work on my 2004 BMW 325xi wagon.. Everything lined up great until I got to the 2 small rectangular inner wheel well brackets.. They were too long, and would of run into the side wall of the wheel well.. I needed to trim about an 1/8" off of one end of each of them.. Then i trimmed a 45 degree cut on one corner of each.. A little paint, and ready to go.. Luckily I have a metal chop saw and was able to modify fairly easily.. In the video they are using a 2004 325 sedan without a problem.. Same year car. Maybe there is a slight difference in the wagon that was not accounted for when manufacturing this kit.. None the less, seems like it will work fine now.
Took about 2 hours, and I was a BMW dealer technician at a time when a ton of these were coming into the shop. Bumper cover needs to be removed. I applied ultra black silicone in all holes drilled to prevent rusting of the exposed metal. Only issue with the kit was the left front bracket in the spare tire well hit the the well wall. Just used an angle grinder to grind a small corner of the bracket.

Agustin
10/10/2023
After a year thr hitch has been great. I use once or twice a week.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.











Ergin
4/1/2013
Het thereI am about the but one of this hitch for my 2001 bmw 325 xi sport wagon , I am planing to launch a jet ski , as an advice you think that would work ? Thanks