Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your Chevrolet C/K Series Pickup with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
I have had the front receiver hitch installed on my 1996 Suburban for about a year now. I have a 12000 lb winch installed using that receiver hitch. I have gotten stuck twice and had to use the winch to extract the truck. Very glad that I have the front receiver hitch as it made putting on the winch very easy. Also useful for mounting a receiver mount bicycle rack to the front as well.
Product was shipped promptly and arrived a few days later. Packing was good for a heavy item with pointy edges, no issues breaking out of the box. Installation on a lift took about 30 minutes on my 1999 K2500 Suburban. The bolts were long enough to allow for my tow hooks that were already in place. A bolt stringer to pull the rear bolts from the top (inside the frame) is provided along with nuts, the other four just replaced the stock bolts that I had that mount from the bottom into tapped frame metal through the tow hooks. Curt makes great quality stuff. Clearance was reduced a little but I'm not concerned about it.
The front mount hitch looks and feels very solid. I haven't installed it yet, but it looks as though it will be trouble free. I'll be using it for my 9,000lb Westin winch, and a cargo carrier on my 1997 K2500 Suburban
Following the instructions I had the hitch mounted in 30 minutes. The picture shows what I wanted it for. Great for when I am towing the pop-up camper.
Took about 20 minutes to install!!! Needed it for my winch. Michelle S. Took my order I think on a Tuesday and said I'd get it sometime the following week. I got it yesterday!!! Took a whole 2 days!!! If you need to order anything call Michelle. I think her ext. Is 79327. SHE'S AWESOME. THANK YOU MICHELLE!!!
Very fast shipping great product kept me up to date
It is a very well designed product
Great product, timely S/H & easy install.
Customer service was great as always.
Install went smooth. Etrailer.com you can't go wrong; Curt is a 5-Star product too.
OE tow hooks fit with no cutting.
1999 K1500 Suburban (old body)
Bradley
5/31/2021
Still doing the job with a 10k winch on the front of the unit.
Excellent hitch, easy install with minimal tools. Installed on front of my 1999 K2500 Suburban. I can now use my bicycle rack on the front of my Suburban leaving the rear doors fully functional.
Billy B.
5/26/2016
Product works great.
I purchased this front receiver hitch to be able to park my travel trailer in a tight space. It is everything that was advertised. Installation was easy and straight forward. It took me a bit longer to install due to my 99 GMC Truck's tow hook nuts not being welded to the inside of the frame. There was a threaded metal strip instead which moved around when the bolts were removed. It was difficult to line up the tow hook and hitch holes to get the bolt started in the strip. I finally used a magnet to support the tow hook and a pair of needle nose vise grips to hold the strip while I started the bolts. Hind site is 20 - 20, It would have been easier to use the bolt and nut combinations provided with the hitch for all 6 of the holes. Out side of this, assembly was easy. The wire tool provided to install the bolts thru the inside of the frame was a great time saver and a wonderful invention. I am well satisfied with this hitch.
Mounted easily and proved to be very useful. Used A receiver type mounted snow plow all of last season to plow my driveway.
The hitch is well built but simply too low (when mounted) to be of much practical use. Ideally the receiver needs to be at the same level as the bumper.
Jenny N.
2/22/2022
We do have an alternate hitch where the receiver is higher for your 1995 Chevy CK pickup. It is part # 65005.
The product itself is great, packaged nicely, etc but the directions are a bit sketchy. They could've done a much better job with it.
It was too low to be installed on the front of my truck kept scraping the ground. It's been sitting in my storage for over a year.
Jenny N.
5/3/2022
We do have an alternate hitch that will sit at an estimated two inches higher when installed then the Curt hitch. It is part # 65005 on our site and will fit with a 1989 GMC CK Pickup 1500 2 or 4 WD. It does require drilling, the fascia will need to be trimmed, and the license plate would need to be relocated.
Very easy installation
I've purchased two (2) Hitch receivers from etrailer.com. One - for Toyota FJ Cruser and one - for Chevy pickup truck. Both fit my vehicles perfectly. I am very satisfied and happy with the site service and product.
Easy to install and is holding up great. I recommend a hitch cap to prevent oncoming road debris from prematurely wearing away at the receiver. Thank you Curt and thank you etrailer!
I bought this to make parking in my garage safer and easier. It's a very steep driveway and very tricky access street. This hitch makes the job much easier. I can use it for long boat ramps if and when I need to. It was quite easily installed. Glad I purchased it.
Fit my Suburban perfectly. I use it to mount my foldable cargo basket (also from etrailer), so I can still open the rear doors easily. Very handy!
Was orders and delivered pretty quickly. Thanks
This front hitch mounted up very nice. However the clearance could have been closer to the bumper. That made it nessary to order a lift adapter for adiquate ground clearance for my use
Good looking finish just what you would expect. I may have saved a couple of bucks buying something made in china but this is top craftsmanship. The fasteners were top end also, didn't have to go to the hardware store and buy new bolts this came with top end stuff. Bolted up with about 1/8th inch clearance very nice. Took longer to read the directions than it did to install, shipping was fast also. will use these folks again.
Product was delivered within
one week to my home in a heavy duty box .
including hardware and direction .
Installation was easy no holes to drill perfect
Alignment done in thirty minutes .
I would recommend E-trailer .
CW
Very good fit, was even able to retain the factory tow hooks. Heavy gauge material provides more than adequate strength. Quality hardware, very nice powder coating, and straight forward installation, makes this an excellent choice!!
Worked great and let me keep my tow hooks. 2 of the bolts stripped but etrailer very quickly replaced them with a new set. Go E!
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Douglas B.
1/4/2018
Great! Still there and still very useful.