Product Experts Available Now!
Call 800-298-8924
Boat Trailer Parts
/
CE Smith
/
I-Beam Clamp
CE Smith I-Beam Clamps for Boat Trailers - Galvanized Steel - 2 Sets
(14 reviews)
Price: $29.95
In Stock
CE Smith I-Beam Clamps for Boat Trailers - Galvanized Steel - 2 Sets
Item # CE27682A
Retail:$37.99
Our Price: $29.95
You Save: 21%Orders above $50 qualify for Free Shipping
Arrives before Christmas with Ground or Free Shipping.
In Stock, Ships Today
- All Info
- Reviews (14)
- Q & A (6)
- Videos (2)
- Photos
- Why etrailer?
CE Smith Boat Trailer Parts - CE27682A
- I-Beam Clamp
- CE Smith
These clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your boat trailer or a boat lift. Its galvanized steel construction resists rust and corrosion.
Features:
- Heavy-duty clamps secure 1-1/2" square tubing to an I-beam
- 2 Sets are required for each I-beam - 1 clamp per end
- Galvanized steel construction is sturdy and resists corrosion
- Made in the USA
Specs:
- Fits I-Beams with width of 2-1/2" to 4-1/2"
- Quantity: 2 sets
This set of clamps makes it easy to attach 1-1/2" tubing, such as a roller-style or bunk-style guide-on, to an I-beam on an aluminum trailer without drilling. They mount on the inside and outside of the I-beam for a snug connection.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
27682A Galvanized Steel I-Beam Clamps by CE Smith - QTY 4
California residents: click here
Video of CE Smith I-Beam Clamps for Boat Trailers - Galvanized Steel - 2 Sets
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Review of CE Smith Boat Trailer Parts - I-Beam Clamp - CE27682A
CE Smith I-Beam Clamps for Boat Trailers Review
Video Transcript for Review of CE Smith Boat Trailer Parts - I-Beam Clamp - CE27682A
Today we're taking a look at the CE Smith I-beam clamps for boat trailers. Now these clamps enable you to mount inch and a half square tubing on the top or bottom of an I-beam on your boat trailer or boat lift. This is great for roller style or bunk style guide-ons. It can be mounted on the inside and outside of the I-beam for a snug fit and connection.So you can see here how you have your bolt hole at the bottom, so you pass through your hardware, get that all secured, take your inch and a half tubing, goes through this area here and up here we have like the clamp. So that fits on either side of the I-beam. It clamps as you tighten the hardware and provides a nice, tight, secure fit.
We are looking at galvanized steel, so it's very strong and durable. It does a great job at resisting rust and corrosion, and it comes with your hardware. You get a couple of different options, so there's two short 3/8 inch diameter bolts and two longer 3/8 inch diameter bolts.So what you would do is simply select the appropriate bolt length needed for your particular application. The longer ones measure about 2 3/4 inches from the bottom of the bolt head to the end of the threads, and the shorter ones are about 1 1/2 from the bottom of the bolt head to the end of the threads. It also comes with your flat washers and your lock nuts.This product is made in the U.S.A., it fits I-beam widths of 2 1/2 to 4 1/2 inches, and with this part number you get two sets.That's gonna do it for today's look at the CE Smith I-beam clamps for boat trailers..
Customer Reviews
CE Smith I-Beam Clamps for Boat Trailers - Galvanized Steel - 2 Sets - CE27682A
Average Customer Rating: 4.8 out of 5 stars (14 Customer Reviews)
These clamps enable you to mount 1-1/2" square tubing on the top or bottom of an I-beam on your boat trailer or a boat lift. Its galvanized steel construction resists rust and corrosion.
- CE27682A
James - 03/27/2019
51090
by: James03/27/2018
The item came quicker than I expected and only took a few moments to install. 489692
Comments
After a year the clamps still work great with no signs of rust.
James - 03/27/201951090
- CE27682A
by: Wayne02/11/2019
Have not installed the brackets yet, but they are better built than the ones on the trailer when I bought it. Ordering was easy and delivery was exactly when they said it would be. Looking forward to purchasing other products from them 604219
- CE27682A
by: Jimmie10/05/2018
I received the package. I arrived days late, should have received on Monday. 571748
- CE27682A
Sam H - 07/06/2019
57514
by: Sam Henderson07/06/2018
Easy to order, correct item delivered, easy to install, great purchase!!! 538644
Comments
I am glad these come in a pack of two, I sometimes don’t get on the straight and had to change the pieces out again. The product is good my boat control sometimes not..,
Sam H - 07/06/201957514
- CE27682A
by: Sharon04/13/2018
great product; shipped very quickly! 496007
- CE27682A
James m - 03/27/2019
51095
by: James m03/27/2018
Great service, super fast, great price, quality of product , great. Boat trailer is out of town, so no pictures 489719
Comments
working great no problems. will buy again from etrailer thanks
James m - 03/27/201951095
- CE27682A
by: William03/16/2018
Great product. Service was excellent. 485463
- CE27682A
by: Gary12/22/2017
holds guide-ones in place best price e trailer 462118
- CE27682A
by: Nelson J.08/03/2017
Screws were a little short. I have a 7 and a half inch I frame on my boat trailer, Thanks, it will work out fine. 414543
- CE27682A
by: Chris L.07/15/2016
Great service , easy to order , work perfectly . 272138
- CE27682A
by: Bobby L07/06/2016
Good parts, great service, extremely fast shipping. You just can't go wrong. 268618
- CE27682A
Northportdiver - 09/15/2015
14941
by: Northportdiver09/15/2014
Good quality brackets and very easy installation! Secures the guide posts to the trailer I-beam. 150985
Comments
All good!
Northportdiver - 09/15/201514941
- CE27682A
by: Tom N.08/18/2014
These CE Smith I-Beam Clamps worked great. I had some guide on post custom made from heavy duty tube steel and these clamps were exactly what I needed. Shipping from etrailer.com was very quick. 147192
- CE27682A
by: Willie G.12/06/2013
Great product for I BEAM trailers. E trialer was awesome to deal with. Fastest and cheapest shipping around. 109351
15
15
Ask the Experts about this CE Smith Boat Trailer Parts
Do you have a question about this Boat Trailer Part?
- Securing CE Smith I-Beam Clamps for Boat Trailers That keep Falling Off
- The CE Smith I-Beam Clamps for Boat Trailers, part # CE27682A are designed for trailer that have an I-Beam 2-1/2 to 4-1/2 inches wide. It seems odd that one side stays on and the other side keeps falling off on your trailer. I do not recommend using an impact wrench to tighten the clamps as that could cause damage to the clamps or the boat frame.
You might try using a spacer on the bolt in between the lower part of the clamps. I have attached a photo of the # CE27682A. Adding a spacer...
view full answer... - Will the CE Smith I-Beam Clamps Fit on a 4 Inch Wide Trailer I-Beam
- Technically, you are only limited by the size of the nut and bolt. A longer bolt used would mean you could go to a larger I-beam. With the included hardware the minimum I-beam width is 2-1/2 inches and the maximum is 4-1/2 inches. I made a video showing this for you.
view full answer... - I-Beam Clamps for Post Style Guide-Ons for a Boat Trailer
- Yes, the I-Beam frame clamps that come with guide-ons # CE27635 are available separately. For one clamp you would need # CE27681G. They secure a 1-1/2 inch square tube to an I-Beam and 4 are needed per I-Beam. Or you could use # CE27682A for 2 sets. They fit I-Beams with width of 2-1/2 inches to 4-1/2 inches.
view full answer... - How To Fit CE Smith Roller Style Guide-Ons To Wide I-beam on Boat Trailer
- I do have an option for you but you are correct about the hardware that comes with the CE Smith Roller-Style Guide-Ons for Boat Trailers part # CE27610 not fitting your I-beam that is 5-1/2" tall and 3-1/2" wide. However, you can still use the guide-ons with CE Smith I-Beam Clamps part # CE27682A to fit your I-beam. The other options for guide-on do not come with hardware to fit the i-beam either so you would need to use the clamps. They fit I-Beams with width of 2-1/2" to 4-1/2". I have...
view full answer... - Are There Recommended Guide-Ons for Pontoon Boat Trailers
- I wish we had a specific set of rollers for your pontoon scissor trailer but since there are so many different designs with boat trailers and everyone has a different idea of how to utilize the rollers it really boils down to what you are wanting for your specific application.
For example, the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 that you referenced are typically used for pontoon trailers but the rollers sit about 25" above the top of your frame. If your...
view full answer... - Availability of Bolster Bracket for Attach Wood Bunk Kit
- Based on what you described it sounds like you are looking for a swivel bolster bracket for your wood bunks like the part # CE10000G which is sold individually.
view full answer...
Do you have a question about this Boat Trailer Part?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality boat trailer parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate boat trailer part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Satisfaction Guarantee
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Sarah W
Updated by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.