Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - 75-Degree Bend - 18"
(130 reviews)
Price: $25.02
In Stock
Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - 75-Degree Bend - 18"
Item # CE27609PG
Retail:$30.63
Our Price: $25.02
You Save: 18%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (130)
- Q & A (0)
- Photos
- Why etrailer?
CE Smith Accessories and Parts - CE27609PG
- Boat Trailer Parts
- Guide-On Parts
- Uprights
- CE Smith
- 18 Inch Long
Replaces 1 upright tube on your CE Smith bunk-style guide-ons for boat trailers (CE27660 and CE27600). Mounting hardware sold separately.
Features:
- Replaces 1 upright tube on your CE Smith bunk-style guide-ons for boat trailers (CE27660 and CE27600)
- Support post clamps onto top or bottom of trailer frame
- Mounting hardware sold separately
- Pre-galvanized steel construction is sturdy and resists corrosion
Specs:
- Post dimensions: 18" tall x 1-1/2" wide
- Length of upright from top of tube to beginning of bend: 17"
- Length of horizontal tube to beginning of the upright portion: 16"
- Bend angle: 75 degrees
This pre-galvanized steel support post mounts horizontally on top of or below your trailer's frame rail. Just slide the post into the boat guide support and secure the post so that the distance between the trailer bunks correctly matches the width of your boat.
Pre-Galvanized Steel
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.
27609PG Replacement Upright Bunk Board Guide-On with 75 Degree Bend by CE Smith
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - 75-Degree Bend - 18" - CE27609PG
Average Customer Rating: 4.8 out of 5 stars (130 Customer Reviews)
Replaces 1 upright tube on your CE Smith bunk-style guide-ons for boat trailers (CE27660 and CE27600). Mounting hardware sold separately.by: Sean10/14/2022
Ordered several products from this site, they were fast, good price and great customer service.
by: James 09/13/2022
My only suggestion is to mention in the product description that the end caps are not included. I would have tried to remove the ones on the guides I replaced or orders the caps at the same time. After I installed the guides, it became clear that I needed the caps to keep rain out. I have since ordered and received the caps but I have not yet installed them.
by: G M05/04/2022
I purchased this hardware for a saltwater trailer that I use frequently because the original brackets corroded away. The hardware package was easy to install and the metal was heavier gauge than the original. Highly recommended for the advertised application.
by: Janet 07/25/2022
Great service -quick shipping - fits perfectly. Spouser is repairing our boat trailer and needed a couple of these uprights replaced on the trailer. Found them online, ordered, received and he was able to easily install them. This will be the first place we look for items in the future. Thanks so much!
by: Stephen 07/24/2022
They do what they are designed to! They are on a boat trailer that generally is used in current, so they take a beating. I usually get 12-18 months out of them, unless they were made of super heavy gauge steel (or solid) I wouldn't expect much more. Would like to see a longer version made, or one with multiple upper holes that I could cut down.
by: Philip 07/27/2022
Much cheaper than CE Smith direct. And the guide-ons came 2 days early. Thank you
by: McConMan07/26/2022
Work great but can come out too easily. That’s why I had to order this one. The old one slipped out and I couldn’t find it. I ended up putting a screw through this part into the receiver to prevent losing another one.
by: Mike 11/30/2022
Item arrived ahead of time and fit perf ectly!
by: James 10/20/2020
You get what you order on e-trailer. I ordered 4 replacement uprights for my side bunks and they look just like the pictures on the e-trailer.
Comments
Still doing its job. Making getting the boat on the trailer.
James S - 10/21/2021by: Bill H11/23/2020
I had a minor accident and both bunk brackets were damaged. These replacements fit perfectly and it looks great.
Comments
I replaced the bunk on one side because of a minor accident. This replacement was of equal quality. I am very satisfied.
Bill H - 11/27/2021by: Ron 08/31/2022
They were not all uniform shaped but made them work any way
by: Larry10/30/2021
There was NO square end caps. There were large roller caps that I didn't need.
Comments
We unfortunately do not have any 18 inch guide ons with end caps included.
-- 
Sierra K - 11/01/2021by: Matt S11/17/2016
Happy with product. I would have expected a plastic square cap for the top of the angle to keep water out. Not sure why that isn't standard. But customer assistance via e mail, product quality, time in transit-excellent. Will use again easily.
Comments
yep. works great. Thanks!
Matt S - 11/17/2017by: Larry 08/11/2018
Part was ordered to replace a rusted out boat trailer guide. Love the web site because of the detailed product description and video. Product was shipped quickly and well packaged and I was provided with tracking info as soon as it was shipped. From now on, if I need any trailer parts I will only use etrailercom
Comments
Still working great. Thanks
LARRY B - 08/11/2019by: Dickie08/09/2022
Perfect saved having to buy a whole new kit
by: wayne a06/02/2017
these guide rails were a very good choice for a small 16 ft utility boat trailer.the cost and ease of install gave me good bang for the buck. as for e trailer they are very good at providing the product, price and most important the information needed to get it done. in dealing with them over the yrs i have never felt in the least that i made a poor choice dealing with etrailer
Comments
After a year I still feel the same about the product. For the life of me I can not understand why I chose 4 stars instead of five stars
wayne - 06/03/2018by: Roy05/20/2018
Great fit, as advertised. Great replacement for rusted out original bunk side guide brackets without having to order the whole lot. Prompt shipping, great communication, good value.
Comments
After a year in use, great corrosion resistance, great fit, still working out great!
Roy - 05/20/2019by: RC04/12/2017
After one year the replacement part is working fine. I'd attach a picture, but there isn't much to see. That said, I'm still amazed that etrailer connected me with the OEM for the original kit and that they sold me the single part: that's true customer service from two organizations.
I've recently replaced my tow vehicle, guess where I'm going to go for a new hitch assembly.
by: Lee01/14/2022
They get the job done but won’t last more than a couple years for salt water use. Galvanizing is too light. Not much else out there for replacements. This is my second or third set I believe,
by: Lance S.05/17/2019
Great product met all my expectations. Measurements for product were very accurate so it fit the application on my trailer perfectly as advertised. Shipping was very fast. Would recommend etrailer.com to anyone.
Comments
After one year replacement part has held up well. Could not be happier with it at this point.
Lance S - 05/18/2020by: Harold05/05/2016
Very good product. I have a boat wider in the center than on the back. With this angle I should be able to clear the widest part when the boat floats off the trailer. Regardless of this the product is nice and shipping was very fast. thanks for the good service.
Comments
The part is doing great. I have it on my boat trailer. Very satisfied.
Harold - 01/30/2018by: Dave Mc.09/11/2014
This is just what I needed, I put the first side on last week and it fits perfect. These are a direct replacement for my 15 yr. old hand made guides.
thanks,
Dave Mc.
Comments
My son now owns the boat and they are still working good, thanks.
Dave M - 09/11/2015by: Scott04/05/2018
I needed a new guide-on after getting a pre-owned trailer. I found this website and liked the price! I ordered immediately and saw it at my door very quickly and nicely packaged! It did the trick and is still holding up to this day. Will do business with etrailer again in the future if needed. Also, will recommend to others if they are need of parts!
by: Timothy 10/21/2021
had to tweek a little but great(had to make shorter the part that goes on the trailer)
by: Lincoln C.05/19/2015
Everything worked out as expected. Items came nicely package. Only thing was that I was missing few bolts according to instruction page. But no big deal as I did not need them to make the install. In addition, I had to make few minor modifications to get it the draw-tite hitch to fit. Took approximately 2 hrs to install.
25
129
Show More Reviews
See what our Experts say about this CE Smith Accessories and Parts
- How Many Replacement Uprights Come in Part # CE27609PGThe Replacement Upright for CE Smith Bunk-Style Guide-Ons # CE27609PG comes as a single unit. To order 2 simply change the "Quantity" to 2 when adding it to your shopping cart.
view full answer... - Replacement Upright/Rubber Roller for CE Smith Roller-Style Guide-On CE27610CE Smith Roller-Style Guide-Ons for Boat Trailers # CE27610 has available a replacement part # CE27612PG. This is the 9-inch black rubber roller and galvanized steel square tube together as one assembly. For just the steel upright use part # CE27609PG-1. You will need to drill this to accept the roller mounting hardware, not included.
view full answer... - Availability of Replacement Boat Trailer Guide-On Posts Without Tubing or HardwareMany of the boat trailer guide-on posts we offer are parts of complete kits that include the PVC pipes, guide-on posts and installation hardware, as shown on the linked page. But we also offer two replacement uprights for CE Smith bunk-style guide-ons. These can be seen on the other included link. Part # CE27609PG is a 1-1/2-inch galvanized guide-on post with a 75-degree bend that is 18-inches tall. Part # CE27608PG has a 90-degree bend. Both are sold as individual units.
view full answer... - What Size PVC Pipe Fits Over Replacement Upright for CE Smith Bunk-Style Guide-OnsNo, 2 inch PVC would not fit around the Replacement Upright # CE27609PG. The upright is 1-1/2 inches square which means diagonally it is 2-1/8 inches. If you have PVC that has a 2-1/8 or slightly larger inner diameter such as # CE11340 then it would fit but 2 inch would not.
view full answer... - Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat TrailersYes, the replacement upright for CE Smith Guide-Ons # CE27660 is available by itself. It is part # CE27609PG.
view full answer... - Replacement Post Recommendation for CE Smith Bunk-Style Guide-Ons for Boat TrailersSounds like you have a set of boat trailer guide ons and are looking for a replacement post. I'd have to know which system you have though to know for certain. If you have the part # CE27660 then the correct replacement post would be the part # CE27609PG.
view full answer... - Replacement Upright Post Recommendation for CE Smith Bunk-Style Guide-Ons # CE27600Yes, you would want the Replacement Upright Post part # CE27609PG for a replacement upright post for the CE Smith Bunk-Style Guide-Ons # CE27600.
view full answer... - Replacement Upright Bar Bracket for CE Smith Boat Bunks # CE27600It looks like you have the CE Smith boat bunks part # CE27600 in the picture you sent in so then for replacement upright brackets you'd want the # CE27609PG and you'd be set.
view full answer...
- What Size Guide On Posts Will the CE Smith Replacement Endcap Fit OnI can't tell you for sure if this will fit on specific manufacturer's trailers or not, but I can tell you that the CE Smith Replacement Endcap for CE Smith Guide-On Uprights # CE11332 is designed to fit on the Replacement Upright for CE Smith Roller-Style Guide-Ons for Boat Trailers - 18" # CE27609PG-1, which is 1-1/2" x 1-1/2". As long as the guide on upright on your Wesco trailer has a 1-1/2" square opening then you could likely make the CE Smith endcaps work.
view full answer... - Replacement Post Recommendation for CE Smith Boat Guide On part # CE27610For the part # CE27610 we do have replacement posts. For that you would want the part # CE27609PG-1.
view full answer... - Does Replacement Upright for CE Smith Roller-Style Guide-Ons Have Square Holes for Carriage BoltsThe Replacement Upright # CE27609PG-1 that you referenced does have the square holes on the back of the upright portion of the bracket to allow carriage bolts to run through them and attach the rollers of the # CE27610. Our product pictures for the upright don't show the angle where you would be able to see the holes but they are there.
view full answer... - Does Bracket Kit part # CE11452-A Fit Uprights # CE27609PGYou are correct that the hardware kit # CE11452-A is correct for the upright brackets part # CE27609PG.
view full answer... - Replacement Upright Section for CE Smith Bunk Guide OnsI am not totally sure which CE Smith Guide Ons you have but we have the part # CE27605PG which fits the # CE27640 and # CE27760. This is 39 inches tall. For a 18 inch tall section you'd want the part # CE27608PG or if you have the upright that angles out we have the part # CE27609PG.
view full answer... - Replacement Parts for Bunk-Style Guide-Ons for Boat TrailerIn order to piece together Bunk-Style Guide-Ons for your boat trailer, you will use the CE Smith Replacement Upright # CE27609PG mentioned in your question, along with the Replacement Mounting Hardware Kit # CE11452-A and Swivel Bracket # CE10206G. This will be everything you need excluding the bunk boards.
view full answer... - How to Order the CE Smith Bunk-Style Guide-Ons without BoardsYou could piece together the part # CE27600 without the boards if you wanted to. For that you would need the part # CE27609PG for the uprights, # CE11452-A for the mounting brackets, and finally part # CE10206G for the swivel brackets and you would have everything but the boards and carpeting.
view full answer... - Replacement Bunk Board Brackets for a Boat TrailerI do have options for you but none of them are specific to your boat trailer. However, bunk boards are fairly universal so I do believe we have options for you. If you are referring to the brackets that attach the posts for the bunk boards to the frame of your trailer then you can use part # CE11451-A as long as your frame does not exceed 3" wide x 4-1/4" tall and the guide posts like part # CE27609PG are 1-1/2" wide. If your frame exceeds 3" wide x 4-1/4" tall but not 3" wide x 5-1/4"...
view full answer... - Available Types of Boat Trailer Guide OnsWe have bunk style guide-ons for boat trailers such as 60-inch bunk kit # CE27600, roller type kits like # CE27610 and also post style kits like # CE27640. You can see items on the linked page. All of these kits use mounting brackets that give you some sideways adjustment capability so the guide ons will be at the right positions for your hull. We also have complete roller bunk kits like # DL21741 and other boat trailer parts that are shown on the other linked pages.
view full answer... - How To Determine Fit of the CE Smith Bunkboard Guide-On Kit CE27600K75I don't have any specifics on your boat or trailer but the main thing you need to check before using the CE Smith Bunkboard Guide-On Kit part # CE27600K75 is your frame size. This kit works with trailer frames 3" wide and up to 4-1/2" tall. However, it can also accommodate trailer frames 3" wide and up 6" tall if you use the CE Smith Extra-Long U-Bolt Kit part # CE11416. If your trailer frame is not 3" wide or taller than 6" tall then you would need to combine part # CE27609PG (4), part...
view full answer... - Replacement Parts For CE Smith Bunk-Style Guide-Ons Set # CE27660 To Build a Single SideWe do offer the following replacement parts that will allow you to just get a single bunk guide like those found in the CE Smith Bunk-Style Guide-Ons Set # CE27660. Replacement Upright # CE27609PG Qty 1 CE Smith Swivel Bracket # CE10200G Qty 2 Replacement CE Smith Guide-On Mounting U-Bracket # CES94FR Qty 1 CE Smith U-Bolt Kit # CES44FR Qty 1 CE Smith Deluxe Marine-Grade Carpeting # CE11372 You will need to source the lumber for the bunk board and hardware for the swivel bracket locally...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.